Construction and Building Materials - November 2018

Erschienen:	November 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Cecini, Domenico / Austin, Simon A. / Cavalaro, Sergio / Palmeri, Alessandro	Accelerated electric curing of steel-fibre reinforced concrete	192-204
Azimi-Pour, Mohammad / Eskandari-Naddaf, Hamid	ANN and GEP prediction for simultaneous effect of nano and micro silica on the compressive and flexural strength of cement mortar	978-992
Fu, Zhongqiu / Wang, Yixun / Ji, Bohai / Liu, Tianjia	Assessment approach for multiaxial fatigue damage of deck and U-rib weld in steel bridge decks	276-285
Chu, Chengfu / Deng, Yongfeng / Zhou, Annan / Feng, Qi / Ye, Hao / Zha, Fusheng	Backfilling performance of mixtures of dredged river sediment and iron tailing slag stabilized by calcium carbide slag in mine goaf	849-856
Nikooravesh, Morteza / Soltani, Masoud	Behavior of unreinforced masonry piers strengthened using centercore method; experimental investigation	236-244
Sarhan, Mazin M. / Hadi, Muhammad N. S. / Teh, Lip H.	Bond behaviour of steel plate reinforced concrete beams	751-756
He, Tingshu / Xu, Rongsheng / Chen, Chang / Yang, Lei / Yang, Renhe / Da, Yongqi	Carbonation modeling analysis on carbonation behavior of sand autoclaved aerated concrete	102-108
Chhaiba, S. / Blanco-Varela, M. T. / Diouri, A. / Bougarrani, S.	Characterization and hydration of cements and pastes obtained from raw mix containing Moroccan oil shale and coal waste as a raw material	539-549
Abdel-Gawwad, H. A. / Abd El-Aleem, S. / Amer, A. A. / El-Didamony, H. / Arif, M. A.	Combined impact of silicate-amorphicity and MgO-reactivity on the performance of Mg-silicate cement	78-85
Gardner, Leroy / Yun, Xiang	Description of stress-strain curves for cold-formed steels	527-538
Trejo, David / Shakouri, Mahmoud / Vaddey, Naga Pavan / Isgor, O. Burkan	Development of empirical models for chloride binding in cementitious systems containing admixed chlorides	157-169
Lin, Juntao / Huo, Lin / Xu, Fang / Xiao, Yue / Hong, Jinxiang	Development of microstructure and early-stage strength for 100% cold recycled asphalt mixture treated with emulsion and cement	924-933
Malkawi, Ahmad B. / Al-Mattarneh, Hashem / Achara, Bitrus Emmanuel / Mohammed, Bashar S. / Nuruddin, Muhd Fadhil	Dielectric properties for characterization of fly ash-based geopolymer binders	19-32
Madadi, Amirhossein / Eskandari-Naddaf, Hamid / Shadnia, Rasoul / Zhang, Lianyang	Digital image correlation to characterize the flexural behavior of lightweight ferrocement slab panels	967-977
Yu, Zheng / Yang, Longcai / Zhou, Shunhua / Gong, Quanmei / Zhu, Hongbo	Durability of cement-sodium silicate grouts with a high water to binder ratio in marine environments	550-559
Esquinas, A. R. / Alvarez, J. I. / Jiménez, J. R. / Fernández, J. M.	Durability of self-compacting concrete made from non-conforming fly ash from coal-fired power plants	993-1006
Cui, Hongzhi / Jin, Zhiyang / Bao, Xiaohua / Tang, Waiching / Dong, Biqin	Effect of carbon fiber and nanosilica on shear properties of silty soil and the mechanisms	286-295
Kazmi, Syed Minhaj Saleem / Munir, Muhammad Junaid / Wu, Yu-Fei / Patnaikuni, Indubhushan	Effect of macro-synthetic fibers on the fracture energy and mechanical behavior of recycled aggregate concrete	857-868
Brodsky, Alex / Rabinovitch, Oded / Yankelevsky, David Z.	Effect of masonry joints on the behavior of infilled frames	144-156
Zhang, Yu / Wan, Xiaomei / Hou, Dongshuai / Zhao, Tiejun / Cui, Yifei	The effect of mechanical load on transport property and pore structure of alkali-activated slag concrete	397-408
Li, J. / Du, C. W. / Liu, Z. Y. / Li, X. G. / Liu, M.	Effect of microstructure on the corrosion resistance of 2205 duplex stainless steel. Part 1: Microstructure evolution during isothermal aging at 850 °C and evaluation of anticorrosion properties by methods of cyclic potentiodynamic polarization and electr	1286-1293
Li, J. / Du, C. W. / Liu, Z. Y. / Li, X. G. / Liu, M.	Effect of microstructure on the corrosion resistance of 2205 duplex stainless steel. Part 2: Electrochemical noise analysis of corrosion behaviors of different microstructures based on wavelet transform	1294-1302
Leonavičius, Dainius / Pundienė, Ina / Girskas, Giedrius / Pranckevičienė, Jolanta / Kligys, Modestas / Kairytė, Agnė	The effect of multi-walled carbon nanotubes on the rheological properties and hydration process of cement pastes	947-954
Hao, Lucen / Liu, Yuanzhen / Wang, Wenjing / Zhang, Jiaguang / Zhang, Yu	Effect of salty freeze-thaw cycles on durability of thermal insulation concrete with recycled aggregates	478-486
He, Xingyang / Ma, Mengyang / Su, Ying / Lan, Meng / Zheng, Zhengqi / Wang, Tingwei / Strnadel, Bohumír / Zeng, Sanhai	The effect of ultrahigh volume ultrafine blast furnace slag on the properties of cement pastes	438-447
Kaja, A. M. / Lazaro, A. / Yu, Q. L.	Effects of Portland cement on activation mechanism of class F fly ash geopolymer cured under ambient conditions	1113-1123
Weng, Yiwei / Lu, Bing / Li, Mingyang / Liu, Zhixin / Tan, Ming Jen / Qian, Shunzhi	Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing	676-685
Wang, Danna / Zhang, Wei / Ruan, Yanfeng / Yu, Xun / Han, Baoguo	Enhancements and mechanisms of nanoparticles on wear resistance and chloride penetration resistance of reactive powder concrete	487-497
Ibrahim, Mohammed / Megat Johari, Megat Azmi / Rahman, Muhammed Kalimur / Maslehuddin, Mohammed / Mohamed, Hatim Dafalla	Enhancing the engineering properties and microstructure of room temperature cured alkali activated natural pozzolan based concrete utilizing nanosilica	352-365
Gu, Fan / Watson, Donald / Moore, Jason / Tran, Nam	Evaluation of the benefits of open graded friction course: Case study	131-143
Wang, Xiao-Hui / Chen, Bing / Tang, Peng	Experimental and analytical study on bond strength of normal uncoated and epoxy-coated reinforcing bars	612-628
Hai, Le-Tian / Sun, Fei-Fei / Zhao, Chen / Li, Guo-Qiang / Wang, Yan-Bo	Experimental cyclic behavior and constitutive modeling of high strength structural steels	1264-1285
Chen, Jiaqi / Chu, Renxin / Wang, Hao / Xie, Pengyu	Experimental measurement and microstructure-based simulation of thermal conductivity of unbound aggregates	8-18
Pereira, L. / Freire, A. C. / Sá da Costa, M. / Antunes, V. / Quaresma, L. / Micaelo, R.	Experimental study of the effect of filler on the ductility of filler-bitumen mastics	1045-1053
Zemour, Nabila / Asadian, Alireza / Ahmed, Ehab A. / Khayat, Kamal H. / Benmokrane, Brahim	Experimental study on the bond behavior of GFRP bars in normal and self-consolidating concrete	869-881
Sheng, Jie / Xia, Junwu / Ma, Renwei	Experimental study on the coupling effect of sulfate corrosion and loading on the mechanical behavior of steel and H-section beam	711-718
Li, Ziran / Zhang, Dachang / Wu, Haiyang / Huang, Fenghua / Hong, Wan / Zang, Xiangsheng	Fatigue properties of welded Q420 high strength steel at room and low temperatures	955-966
Sherir, Mohamed A. A. / Hossain, Khandaker M. A. / Lachemi, Mohamed	Fresh state, mechanical & durability properties of strain hardening cementitious composite produced with locally available aggregates and high volume of fly ash	253-264
Schiavo, Lícia S. A. / Mantas, Pedro Q. / Segadães, Ana M. / Cruz, Robinson C. D.	From dry pressing to plastic forming of ceramics: Assessing the workability window	594-600
Li, Chao / Wu, Shaopeng / Chen, Zongwu / Tao, Guanyu / Xiao, Yue	Improved microwave heating and healing properties of bitumen by using nanometer microwave-absorbers	757-767
Flores Medina, N. / del Mar Barbero-Barrera, María / Jové-Sandoval, Félix	Improvement of the mechanical and physical properties of cement pastes and mortars through the addition isostatic graphite	898-905
Gali, Sahith / Subramaniam, Kolluru V. L.	Improvements in fracture behavior and shear capacity of fiber reinforced normal and self consolidating concrete: A comparative study	205-217
Tamrakar, S. B. / Asaue, H. / Shiotani, T. / Chang, K. C. / Fujiwara, Y.	In situ ultrasonic method for estimating residual tension of wedge fix type anchors	1184-1190
Hou, Chen / Zhu, Wancheng / Yan, Baoxu / Guan, Kai / Du, Jiafa	Influence of binder content on temperature and internal strain evolution of early age cemented tailings backfill	585-593
Chung, Sang-Yeop / Abd Elrahman, Mohamed / Stephan, Dietmar / Kamm, Paul H.	The influence of different concrete additions on the properties of lightweight concrete evaluated using experimental and numerical approaches	314-322
Islam, Mohammad S. / Ahmed, Syed J. U.	Influence of jute fiber on concrete properties	768-776
Nunes, Cristiana / Mácová, Petra / Frankeová, Dita / Ševčík, Radek / Viani, Alberto	Influence of linseed oil on the microstructure and composition of lime and lime-metakaolin pastes after a long curing time	787-796
Sayadi, Aliakbar / Neitzert, Thomas R. / Clifton, G. Charles	Influence of poly-lactic acid on the properties of perlite concrete	660-675
Venquiaruto, Simone / Bernardino da Silva, Lucília / Dal Molin, Denise C. C.	Influence of preloading-induced microcracking on the durability of concrete produced with different types of cement	777-786
Abraham, Sarah Mariam / Ransinchung, G. D. R. N.	Influence of RAP aggregates on strength, durability and porosity of cement mortar	1105-1112
Szeląg, Maciej	Influence of specimen's shape and size on the thermal cracks' geometry of cement paste	1155-1172
Liu, Jiaping / Cai, Jingshun / Shi, Liang / Liu, Jianzhong / Zhou, xiaocheng / Mu, Song / Hong, Jinxiang	The inhibition behavior of a water-soluble silane for reinforcing steel in 3.5% NaCl saturated Ca(OH)2 solution	95-101
Mostofinejad, Davood / Heydari Mofrad, Mohsen / Hosseini, Ardalan / Heydari Mofrad, Hassan	Investigating the effects of concrete compressive strength, CFRP thickness and groove depth on CFRP-concrete bond strength of EBROG joints	323-337
Abd, Duraid M. / Al-Khalid, Hussain / Akhtar, Riaz	An investigation into the impact of warm mix asphalt additives on asphalt mixture phases through a nano-mechanical approach	296-306
Li, Yuanyuan / Wu, Shaopeng / Dai, Ying / Pang, Ling / Liu, Quantao / Nie, Shuai / Li, Hechuan / Wang, Zengfeng	Laboratory and field evaluation of sodium stearate organically modified LDHs effect on the anti aging performance of asphalt mixtures	366-374
Liu, Nengyuan / Yan, Kezhen / You, Lingyun / Chen, Ming	Laboratory testing on the anti-aging performance of amorphous poly alpha olefin (APAO) modified asphalt binders	460-469
Al-Negheimish, Abdulaziz I. / El-Sayed, Ahmed K. / Khanbari, Majed O. / Alhozaimy, Abdulrahman M.	Long-term deflection of prestressed SCC hollow core slabs	181-191
Xie, Jian / Zhao, Xueqi / Yan, Jia-Bao	Mechanical properties of high strength steel strand at low temperatures: Tests and analysis	1076-1092
Nayaka, Ramappa Ramesh / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Yusoff, Sumiani Binti	Microstructural investigation and durability performance of high volume industrial by-products-based masonry mortars	906-923
Kong, Yaning / Wang, Peiming / Liu, Shuhua	Microwave pre-curing of Portland cement-steel slag powder composite for its hydration properties	1093-1104
Pellegrini, Daniele / Girardi, Maria / Lourenço, Paulo B. / Masciotta, Maria Giovanna / Mendes, Nuno / Padovani, Cristina / Ramos, Luís F.	Modal analysis of historical masonry structures: Linear perturbation and software benchmarking	1232-1250
Somé, Saannibe Ciryle / Ben Fraj, Amor / Pavoine, Alexandre / Hajj Chehade, Mohamad	Modeling and experimental characterization of effective transverse thermal properties of hemp insulation concrete	384-396
An, Gyeong-Hee / Cha, Sang-Lyul / Kim, Jin-Keun	Modification of the long-term deformation models for steel reinforced concrete columns	245-252
Nakhaei, Mostafa / Naderi, Koorosh / Nasrekani, Aliasghar Akbari / Timm, David H.	Moisture resistance study on PE-wax and EBS-wax modified warm mix asphalt using chemical and mechanical procedures	882-889
Hou, Dongshuai / Li, Haibin / Zhang, Lina / Zhang, Jinrui	Nano-scale mechanical properties investigation of C-S-H from hydrated tri-calcium silicate by nano-indentation and molecular dynamics simulation	265-275
Robayo-Salazar, Rafael Andres / Mejía de Gutiérrez, Ruby	Natural volcanic pozzolans as an available raw material for alkali-activated materials in the foreseeable future: A review	109-118
Alexakis, Emm. / Delegou, E. T. / Lampropoulos, K. C. / Apostolopoulou, M. / Ntoutsi, I. / Moropoulou, A.	NDT as a monitoring tool of the works progress and the assessment of materials and rehabilitation interventions at the Holy Aedicule of the Holy Sepulchre	512-526
Wang, Wen / Zammarano, Mauro / Shields, John R. / Knowlton, Elizabeth D. / Kim, Ickchan / Gales, John A. / Hoehler, Matthew S. / Li, Jianzhang	A novel application of silicone-based flame-retardant adhesive in plywood	448-459
Liu, Xiangwei / Hu, Mingyu / Ke, Shujun / Fu, Chao / Guo, Xingguo / Ye, Xiaochun	A novel rammed earthen material stabilized with steel slags	1134-1139
Sun, Congtao / Yuan, Liqiang / Zhai, Xiaofan / Qu, Feng / Li, Yantao / Hou, Baorong	Numerical and experimental study of moisture and chloride transport in unsaturated concrete	1067-1075
Wang, Xiaomeng / Zhou, Chuwei	Numerical investigation for the flexural strengthening of reinforced concrete beams with external prestressed HFRP sheets	804-815
Algaifi, Hassan Amer / Bakar, Suhaimi Abu / Sam, Abdul Rahman Mohd. / Abidin, Ahmad Razin Zainal / Shahir, Shafinaz / AL-Towayti, Wahid Ali Hamood	Numerical modeling for crack self-healing concrete by microbial calcium carbonate	816-824
Liu, Cheng / Xie, Deqing / She, Wei / Liu, Zhiyong / Liu, Guojian / Yang, Lin / Zhang, Yunsheng	Numerical modelling of elastic modulus and diffusion coefficient of concrete as a three-phase composite material	1251-1263
Spitz, N. / Coniglio, N. / El Mansori, M. / Montagne, A. / Mezghani, S.	On functional signatures of bare and coated formwork skin surfaces	560-567
Lauwens, Kathleen / Fortan, Maarten / Arrayago, Itsaso / Mirambell, Enrique / Rossi, Barbara	On the shear resistance of ferritic stainless steel composite slabs	728-735
Gökçe, H. Süleyman / Yalçınkaya, Çağlar / Tuyan, Murat	Optimization of reactive powder concrete by means of barite aggregate for both neutrons and gamma rays	470-477
Chen, Zixuan / Pei, Jianzhong / Li, Rui / Xiao, Feipeng	Performance characteristics of asphalt materials based on molecular dynamics simulation – A review	695-710
Das, Chandra Sekhar / Dey, Tanish / Dandapat, Ramkrishna / Mukharjee, Bibhuti Bhusan / Kumar, Jitendra	Performance evaluation of polypropylene fibre reinforced recycled aggregate concrete	649-659
Han, Jinlong / Shui, Zhonghe / Wang, Guiming / Sun, Tao / Gao, Xu	Performance evaluation of steam cured HPC pipe piles produced with metakaolin based mineral additives	719-727
Pachta, Vasiliki / Triantafyllaki, Sofia / Stefanidou, Maria	Performance of lime-based mortars at elevated temperatures	576-584
Billong, Ndigui / Kinuthia, John / Oti, Jonathan / Melo, Uphie Chinje	Performance of sodium silicate free geopolymers from metakaolin (MK) and Rice Husk Ash (RHA): Effect on tensile strength and microstructure	307-313
Feng, Ya-Song / Du, Yan-Jun / Reddy, Krishna R. / Xia, Wei-Yi	Performance of two novel binders to stabilize field soil with zinc and chloride: Mechanical properties, leachability and mechanisms assessment	1191-1199
Sun, Zengqing / Lin, Xiaochen / Vollpracht, Anya	Pervious concrete made of alkali activated slag and geopolymers	797-803
Ghoddousi, Parviz / Shirzadi Javid, Ali Akbar / Zareechian, Maziar / Habibnejad korayem, Asghar	Physical and chemical effects of siliceous particles at nano, micro, and macro scales on properties of self-consolidating mortar overlays	1140-1154
Zhao, Haitao / Qin, Xiao / Liu, Jiaping / Zhou, Liangliang / Tian, Qian / Wang, Penggang	Pore structure characterization of early-age cement pastes blended with high-volume fly ash	934-946
Bin Tahir, Hassan / Irfan, Muhammad / Hussain, Arshad / Ali, Yasir / Hussain, Etikaf	Predicting the permanent deformation behaviour of the plant produced asphalt concrete mixtures: A first order regression approach	629-639
Tenza-Abril, A. J. / Villacampa, Y. / Solak, A. M. / Baeza-Brotons, F.	Prediction and sensitivity analysis of compressive strength in segregated lightweight concrete based on artificial neural network using ultrasonic pulse velocity	1173-1183
Wang, YaChao / Zhao, JiangPing	Preliminary study on decanoic/palmitic eutectic mixture modified silica fume geopolymer-based coating for flame retardant plywood	1-7
Peng, Chao / Zhang, Hao / You, Zhanping / Xu, Fang / Jiang, Guosheng / Lv, Songtao / Zhang, Ran / Yang, Hao	Preparation and anti-icing properties of a superhydrophobic silicone coating on asphalt mixture	227-235
Abdel-Gawwad, H. A. / Khalil, Kh. A.	Preparation and characterization of one-part magnesium oxychloride cement	745-750
Sheng, Xiaohui / Wang, Mo / Xu, Tao / Chen, Jun	Preparation, properties and modification mechanism of polyurethane modified emulsified asphalt	375-383
Abousnina, Rajab / Manalo, Allan / Lokuge, Weena / Al-Jabri, Khalifa Saif	Properties and structural behavior of concrete containing fine sand contaminated with light crude oil	1214-1231
Chandra Paul, Suvash / van Rooyen, Algurnon S. / van Zijl, Gideon P. A. G. / Petrik, Leslie Felicia	Properties of cement-based composites using nanoparticles: A comprehensive review	1019-1034
de la Rosa, Ángel / Poveda, Elisa / Ruiz, Gonzalo / Cifuentes, Héctor	Proportioning of self-compacting steel-fiber reinforced concrete mixes based on target plastic viscosity and compressive strength: Mix-design procedure & experimental validation	409-419
Mandel, Kristin / Funke, Henrik / Lindner, Marco / Gelbrich, Sandra / Kroll, Lothar / Schwarz, Thomas	Recipe development of low-cost wollastonite-based phosphate cements	86-94
Sujatha, Evangelin Ramani / Selsia Devi, S.	Reinforced soil blocks: Viable option for low cost building units	1124-1133
Zhu, Han / Liang, Jian / Xu, Jie / Bo, Mingxuan / Li, Jianju / Tang, Bing	Research on anti-chloride ion penetration property of crumb rubber concrete at different ambient temperatures	42-53
Wongprachum, Warun / Sappakittipakorn, Manote / Sukontasukkul, Piti / Chindaprasirt, Prinya / Banthia, Nemkumar	Resistance to sulfate attack and underwater abrasion of fiber reinforced cement mortar	686-694
Li, Yang / Algassem, Omar / Aoude, Hassan	Response of high-strength reinforced concrete beams under shock-tube induced blast loading	420-437
Chen, Mingxu / Li, Laibo / Zheng, Yan / Zhao, Piqi / Lu, Lingchao / Cheng, Xin	Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials	601-611
Qing-biao, Wang / Qing-kai, Zhu / Tang-sha, Shao / Xiao-ge, Yu / Shu-yi, Xu / Jun-jie, Zhang / Qing-li, Kong	The rheological test and application research of glass fiber cement slurry based on plugging mechanism of dynamic water grouting	119-130
Aziminezhad, Mehran / Mahdikhani, Mahdi / Memarpour, Mohammad Mahdi	RSM-based modeling and optimization of self-consolidating mortar to predict acceptable ranges of rheological properties	1200-1213
Park, Byoungsun / Choi, Young Cheol	Self-healing capability of cementitious materials with crystalline admixtures and super absorbent polymers (SAPs)	1054-1066
Shatarat, Nasim / Mahmoud, Hadeel Musa / Katkhuda, Hasan	Shear capacity investigation of self compacting concrete beams with rectangular spiral reinforcement	640-648
Lu, Lingchao / Zhao, Piqi / Lu, Zeyu	A short discussion on how to effectively use graphene oxide to reinforce cementitious composites	33-41
Al-Kamyani, Zahran / Figueiredo, Fabio P. / Hu, Hang / Guadagnini, Maurizio / Pilakoutas, Kypros	Shrinkage and flexural behaviour of free and restrained hybrid steel fibre reinforced concrete	1007-1018
Kaklauskas, Gintaris / Tamulenas, Vytautas / Bado, Mattia Francesco / Bačinskas, Darius	Shrinkage-free tension stiffening law for various concrete grades	736-744
Shamsuddoha, Md / Hüsken, Götz / Schmidt, Wolfram / Kühne, Hans-Carsten / Baeßler, Matthias	Ternary mix design of grout material for structural repair using statistical tools	170-180
Kristombu Baduge, Shanaka / Mendis, Priyan / Ngo, Tuan / Portella, Joanne / Nguyen, Kate	Understanding failure and stress-strain behavior of very-high strength concrete (>100 MPa) confined by lateral reinforcement	62-77
Liu, Yushi / Xu, Entao / Xie, Mingjun / Gao, Xiaojian / Yang, Yingzi / Deng, Hongwei	Use of calcium silicate-coated paraffin/expanded perlite materials to improve the thermal performance of cement mortar	218-226
Gong, Hongren / Sun, Yiren / Shu, Xiang / Huang, Baoshan	Use of random forests regression for predicting IRI of asphalt pavements	890-897
Fuller, Aaron / Stegmaier, Michael / Schulz, Norbert / Menke, Martin / Schellhorn, Hans / Knödler, Friedrich / Maier, Jörg / Scheffknecht, Günter	Use of wood dust fly ash from an industrial pulverized fuel facility for rendering	825-848
Zhang, Ran / You, Zhanping / Wang, Hainian / Chen, Xi / Si, Chundi / Peng, Chao	Using bio-based rejuvenator derived from waste wood to recycle old asphalt	568-575
Gong, Fangyuan / Zhou, Xiaodong / You, Zhanping / Liu, Yu / Chen, Siyu	Using discrete element models to track movement of coarse aggregates during compaction of asphalt mixture	338-351
Cong, Xinyu / Zhou, Wei	Utilisation of water quenched slag as fine aggregate in alkali activated mortar	498-511
Teltayev, B. B. / Amirbayev, E. D. / Radovskiy, B. S.	Viscoelastic characteristics of blown bitumen at low temperatures	54-61
Wang, Xiaoying / Li, Kai / Zhong, Yang / Xu, Qian / Li, Chunzhen	XFEM simulation of reflective crack in asphalt pavement structure under cyclic temperature	1035-1044

Über diese
Datenseite
IssueID
21505
Veröffentlicht am:
27.11.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - November 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - November 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.