Composite Structures - September 2024

Erschienen:	September 2024

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Chen, Xiaojian / Chu, Ziqi / Zhao, Weikai / Wu, Linzhi / Wu, Qianqian / Yu, Guocai	Buckling resistance of ultra-low-density carbon fiber curved-wall honeycomb based on stretching process	118322
Hedayati, Reza / Mohammadi, Kaivan / Salami, Sattar Jedari / Roudbarian, Nima / Nayyeri, Pooyan / Rafiee, Mohamad Mahdi / Bougherara, Habiba	Closed-form analytical relationships for pentamode metamaterials	118334
Kassab, Raghad / Sadeghian, Pedram	A comparative study on the mechanical properties of sandwich beams made with PET FRP facings and varied recycled PET cores	118340
Faupel, Alex / Oskay, Caglar	Computational analysis of the failure mechanisms of a laminated composite in double-edge notch compression configuration	118281
Akkasali, Naveen Kumar / Biswas, Sandhyarani / Panda, Subrata Kumar	Deflection and stress characteristics of single lap joint (adhesively bonded) theoretical analysis and experimental verification	118375
DasGupta, Anirvan	Deformation mechanics of generalized missing rib chiral lattice structures	118333
Guan, Wangdong / Luo, Bin / Han, Wei / Suo, Haoyuan / Niu, Yingjie / Wei, Zhaohui / Cheng, Hui	Deterioration of carbon fiber/matrix interface in humid environments and influence of silicon coupling agent modification: An atomistic investigation	118330
Zhou, Lizhenhui / Liu, Wenyang / Mao, Yiqi / Hou, Shujuan	A diffusion–reaction-deformation cohesive interface for oxidization and self-healing of PyC/SiC interfacial coating	118332
Yazdanparast, Reza / Rafiee, Roham / Kalhori, Hamed / Li, Bing	Dynamic mechanical behavior of CNT-reinforced epoxy under medium-strain rate: A comparative study	118343
Yang, Peixin / Yuan, Wu / Song, Hongwei	Effect of composite lattice on the high-temperature compressive behavior of silicone rubber based ablative materials	118337
Zhang, Xiukuang / Lei, Qian / Meng, Xiangyue / Cao, Xueying / Yin, Jie / Zhou, Shuang / Zhang, Xiaoyan / Jia, Yanlin	Effect of TiC particle size on the microstructure and properties of CuCr-TiC composites manufactured by powder metallurgy	118323
Osa-uwagboe, Norman / Silberschmidt, Vadim V. / Baxevanakis, Konstantinos P. / Demirci, Emrah	Effects of moisture absorption on penetration performance of FRP sandwich structures	118319
Kim, Dong-Hyeop / Kim, Sang-Woo	Enhanced prediction of reflected spectrum for FBG sensors with metallic coating embedded in CFRP composites: Unveiling the impact of process-induced residual stress and coating thickness	118321
Mei, Shi-Jie / Bai, Yu-Lei / Dai, Jian-Guo	Experimental and numerical investigations on shear behavior of RC beams strengthened with U-wrapped PET FRP	118366
Yang, Yanfei / Liu, Junzhi / Cao, Wanwan / Mao, Dongsheng	Experimental and numerical study of resin permeation effect on ballistic behavior of fabric laminate	118327
Liu, Xiaodong / Ge, Jingran / Zhang, Diantang / Liang, Jun	Fatigue damage evolution and residual strength analysis of 3D5D braided composites using X-ray computed tomography, acoustic emission, and digital image correlation	118348
Zhang, Dejun / Chen, Suwen	A finite difference method on crack resistance of reinforced glass beam with non-linear adhesive	118335
Yue, Xiao-Hui / Yin, Xu / Sun, Zi-Yan / Liu, Long-Yue / Wang, Yantao / Xu, Guang-Kui / Cao, Changyong / Zhang, Li-Yuan	Flexible, lightweight, tunable robotic arms enabled by X-tensegrity inspired structures	118331
Liu, Xiaofeng / Sun, Wei / Liu, Honghao / Ma, Hongwei / Li, Hui	Frequency trajectory and modal analysis of variable stiffness composite cylindrical shells with flange	118315
Gaff, Milan / Behnam Hosseini, S. / Paulasová, Dominika / Kamboj, Gourav / Rezaei, Fatemeh / Paul, Dabosmita	Functionality of production processes in mycelium-based composites	118309
Huang, Zhong-Min / Peng, Lin-Xin	Geometrically nonlinear bending analysis of laminated thin plates based on classical laminated plate theory and deep energy method	118314
Charca, Samuel / Jiao-Wang, Liu / Loya, J. A. / Martínez, Miguel A. / Santiuste, Carlos	High cycle fatigue life analysis of unidirectional flax/PLA composites through infrared thermography	118370
Zhao, Zhihao / Sun, Shuangqing / Li, Chunling / Hu, Songqing	In situ growth of micro-nano structured black oxide coating on steel with excellent superhydrophobicity and corrosion resistance	118338
Kavitha Mol, S. / Sadiq, A.	Influence of new AA 2xxx layers on the strength and damage responses of fibre metal laminates during soft body impact	118339
Sun, Zheng / Liu, Quan-Xiu / Liu, Feng / Li, Yuan-Qing / Guo, Fang-Liang / Fu, Shao-Yun	Influences of cryo-thermal cycling on the tensile properties of short carbon fiber/polyetherimide composites	118336
Yang, Nenglong / Zou, Zhenmin / Potluri, Prasad / Soutis, Constantinos / Katnam, Kali Babu	Intra-yarn fibre hybridisation effect on homogenised elastic properties and micro and meso-stress analysis of 2D woven laminae: Two-scale FE model	118358
Sousa, F. C. / Akhavan-Safar, A. / Carbas, R. J. C. / Marques, E. A. S. / Goyal, R. / Jennings, J. / da Silva, L. F. M.	Investigation of geometric and material effects on the fatigue performance of composite and steel adhesive joints	118313
Silva, Francisco Davyd Pereira / Barroso, Elias Saraiva / de Matos, Gabriel Braga Alves / Parente, Evandro / Sousa, João Batista M.	Isogeometric analysis of functionally graded panels using Bézier triangles	118310
Del Bianco, Giulia / Giammaria, Valentina / Capretti, Monica / Boria, Simonetta / Lenci, Stefano / Ciardiello, Raffaele / Castorani, Vincenzo	Low-Velocity Impact of carbon, flax, and hybrid composites: Performance comparison and numerical modeling	118318
Němec, Miroslav / Prokůpek, Luboš / Obst, Vojtěch / Pipíška, Tomáš / Král, Pavel / Hýsek, Štěpán	Novel kraft-lignin-based adhesives for the production of particleboards	118344
Boddapati, Karthik / Osorio, Juan C. / Arrieta, Andres F.	On maintaining bistability of prestressed laminates after clamping	118278
Ulbricht, Nicco / Han, Nuri / Porfiri, Maurizio	On the role of curvature in the response of air-backed composites to hydrodynamic loading: An experimental study	118328
Broberg, Peter H. / Lindgaard, Esben / Thompson, Adam J. / Belnoue, Jonathan P.-H. / Hallett, Stephen R. / Bak, Brian L. V.	Parametric study on the effect of material properties, tool geometry, and tolerances on preform quality in wind turbine blade manufacturing	118324
Wang, Q. Z. / Hu, Y. L. / Yu, Yin / Wu, Dan / Yao, Z. Y.	A peridynamic differential operator modeling approach for ceramic matrix composites microstructure with uniform or non-uniform discretization	118282
Chuang, Andrew E.-Y. / Weng, Pei-Wei / Liu, Chia-Hung / Jheng, Pei-Ru / Rethi, Lekshmi / Nguyen, Hieu Trung / Lu, Hsien-Tsung	Photo-responsive platelet vesicles-iron oxide nanoparticles-bioglass composite for orthopedic bioengineering	118263
van Dooren, Kevin / Bisagni, Chiara	Post-buckling damage tolerance of welded omega-stiffened thermoplastic panels with initial damage	118295
Payandehpeyman, Javad / Hedayatian, Mahdi / Mazaheri, Mojtaba	Predicting effective elastic modulus of CNT metal matrix nanocomposites: A developed micromechanical model with agglomeration and interphase effects	118317
Dong, Tianyu / Yuan, Shenfang / Huang, Tianxiang	Real-time shape sensing of large-scale honeycomb antennas with a displacement-gradient-based variable-size inverse finite element method	118320
Resente, A. / Ricotta, M. / Sorgato, M. / Meneghetti, G.	Static strength assessment of short glass fibre-reinforced polyphenilenesulphide in presence of notches according to different approaches	118312
Cao, Tiancheng / Gong, Yu / Zhao, Libin / Wang, Linjuan / Hu, Ning	Stress based fracture criteria for mixed-mode I/II delamination of unidirectional composite laminates	118325
Nguyen, Minh-Ngoc / Hoang, Van-Nam / Lee, Dongkyu	Topology optimization framework for thermoelastic multiphase materials under vibration and stress constraints using extended solid isotropic material penalization	118316
Bezazi, A. / Bouhemame, N. / Reis, P. N. B. / Santos, P. / Boumediri, H. / Scarpa, F.	Viscoelasticity and impact behaviour of green epoxy bio-composites made of date palm leaflets	118347

Über diese
Datenseite
IssueID
74451
Veröffentlicht am:
31.08.2024
Geändert am:
31.08.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - September 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - September 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.