Composite Structures - August 2024

Erschienen:	August 2024

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Liu, Jiakun / Phoenix, Stuart Leigh	Analytical prediction and numerical verification of stress concentration profile around an in-situ tow break in resin-impregnated filament-wound composites	118185
Ma, Chengzhi / Hui Wu, Jiu / Cui, Zhanyou / Wang, Linbo	Barrier-free subwavelength multi-channel topological acoustic interlayer under direct resonance induction	118236
Henriques, I. R. / Rouleau, L. / Castello, D. A. / Borges, L. A. / Deü, J.-F.	Bayesian calibration of constitutive models for polymeric foams	118231
Cheng, Jin / Peng, Deshang / Hu, Weifei / Liu, Zhenyu / Tan, Jianrong	Collaborative robust topology optimization of FGMs considering hybrid bounded uncertainties based on the distance to ideal solution	118205
Zhang, Ji / Wang, Changguo	Deployment behavior and mechanical property analysis of Kresling origami structure	118234
Qiu, Minghong / Qian, Ye / Dai, Jian-Guo	Enhancing the flexural performance of concrete beams with 3D-printed UHP-SHCC permanent formwork via graded fiber volume fraction	118211
Zheng, Xiaoyuan / Xiao, ZhongMin / Ren, Zhiying / Zi, Bao / Wu, Yiwan / Yao, Liming / Bai, Hongbai	Entangled metallic porous material–silicone rubber interpenetrating phase composites with simultaneous high specific stiffness and energy consumption	118213
Yossef, Mostafa / Noureldin, Mohamed / Alqabbany, Aghyad	Explainable artificial intelligence framework for FRP composites design	118190
Chen, Xinglong / Liu, Hui / Wei, Peng	Extended multiscale FEM-based concurrent optimization of three-dimensional graded lattice structures with multiple microstructure configurations	118186
Calabrese, Angelo Savio / Colombi, Pierluigi / D'Antino, Tommaso	Fatigue and post-fatigue behavior of FRCM-concrete specimens under direct shear and bending conditions	118129
Wang, Yuyang / Lu, Guoxing / Ha, Ngoc San / Wang, Li	In-Plane crushing performance of bionic glass Sponge-Type honeycomb structures	118201
Hartwich, Tobias S. / Panek, Stefan / Wilckens, Dirk / Wille, Tobias / Krause, Dieter	The influence of R/t-ratio on the imperfection sensitivity of the buckling load of thin-walled CFRP cylindrical shells	118216
Tobin, Emma / Bandaru, Aswani Kumar / O’Higgins, Ronan M. / Weaver, Paul M.	The influence of temperature and placement rate on wound laminated carbon fibre/PEEK hoop specimens manufactured by in-situ consolidated LATP	118243
Bao, Chun / Guo, Y. Q. / Wang, Y. J.	Interactive inverse design of periodic non-uniform/inhomogeneous rod structures based on q-learning method	118233
Zhang, Zheng / Li, Shilong / Zhou, Yuting / Huang, Diyong / Sun, Min / Zhang, Guang / Chai, Hao / Jiang, Shaofei	Layer jamming skin‐based bionic webbed foot soft gripper with variable stiffness and envelopment	118215
Wan, Zhiwei / Zhu, Xiang / Li, Tianyun / Zhong, Kexin / Wan, Huchuan	Lightweight damping layer with acoustic black hole profile bonded to a beam for broadband vibration reduction	118235
Chen, Dingkang / Li, Yinggang / Pan, Ziyang / Li, Xunyu / Xu, Tianle / Li, Xiaobin	Low-frequency vibration bandgaps and deep learning-based intelligent design method of Y-shaped core sandwich metabeams	118214
Tang, Enling / Tan, Hongrun / Wang, Ruizhi / Chen, Chuang / Han, Yafei / Chang, Mengzhou / Guo, Kai / He, Liping	Mechanical behavior of STF impregnation and anti-impact performances of Kevlar and UHMPWEF fabric impregnations	118228
Zhang, Ning / Ma, Xiaodong / Dai, Peng / Tian, Xiaogeng	Mechanical properties and regulatory strategy of twinned tetrahedral lattice structures	118239
Praud, Francis / Schneider, Konrad / Chatzigeorgiou, George / Meraghni, Fodil	Microstructure generation and full-field multi-scale analyses for short fiber reinforced thermoplastics: Application to PA66GF composites	118175
Yang, Xuefei / Gao, Liang / Li, Hao	Multi-feature parallel topology optimization of fiber-reinforced coated structures based on a dual variable scale filtering method	118227
Tiwari, Anupam	Nanocomposite fracture analysis: Aligned Fe3O4-GNP nanoplatelets’ effects on K, G, CTODc, and fracture mechanisms in epoxy matrices	118208
Liu, Tian-Wei / Bai, Jiang-Bo / Fantuzzi, Nicholas	New insights into folding tape-spring	118225
Liu, Yong / Han, Qixiu / Shi, Xiaojin / Pan, Zitao / Zhou, Honggen / Chen, Yong	Optimization of stepped hole drilling for consistent aperture in BCF/PEEK and PEEK stacks	118212
Xiao, Gang / Tan, Wei / Mai, Peirong / Han, Shiwen / Ou, Jinping	Pullout behavior of the steel-FRP composite bar with the anchor head made of the grout-filled steel tube	118242

Über diese
Datenseite
IssueID
74145
Veröffentlicht am:
20.06.2024
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - August 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - August 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.