Composite Structures - Februar 2024

Erschienen:	Februar 2024

Autor(en)	Titel	Seite(n)
Kumar, Abhijeet / Haldar, Ayan / Weaver, Paul M.	An adaptive metastructure concept using bistable composite laminates	117767
Wu, Xiaoli / Li, Yunyi / Yin, Ting / Liao, Yijun / Mo, Site / Huang, Wanxia	The alignment of CNTs perpendicular to electric filed resulted in effective electrothermal de/anti-icing performance at high voltage for CNT/XLPE composites	117835
Jiang, Yulin / Yang, Lu / Li, Chaofeng / Miao, Xueyang	Analysis and experiments of bi-stable laminate configuration control based on MFC piezoelectric actuation	117820
Ji, Haibo / Wang, Xin / Tang, Nianhua / Li, Bingyang / Li, Zhen / Geng, Xinyu / Wang, Pengfei / Zhang, Rui / Lu, Tian Jian	Ballistic perforation of aramid laminates: Projectile nose shape sensitivity	117807
Grotz, Leana / Kirane, Kedar	Characterizing compressive failure mechanisms and their transitions in woven composites under on and off-axis loading	117848
Farrokhabadi, Amin / Chronopoulos, Dimitrios	Composite curved hourglass cellular structures: Design optimization for stiffness response and crashworthiness performance	117834
Mehdipour, Hadi / Bastami, Abbas Rohani / Soorgee, Mohammad Hossein	Comprehensive 3-D homogenization approach for predicting mechanical properties and creep behavior of polymer nanocomposites reinforced with graphene nanoplatelets	117823
Liu, Xiaofeng / Sun, Wei / Liu, Honghao / Du, Dongxu / Ma, Hongwei / Li, Hui	Coupled vibration analysis of bolted variable angle tow plates under combined nonlinear effects	117847
Sheikhi, Mohammad / Anamagh, Mirmeysam Rafiei / Bediz, Bekir / Tunc, Lutfi Taner	Design of manufacturable variable stiffness composite laminates using spectral Chebyshev and normalized cut segmentation methods	117836
Montemurro, Marco / Alaimo, Gianluca / Panettieri, Enrico / Catapano, Anita / Carraturo, Massimo / Auricchio, Ferdinando	Design of multi-material structures using material jetting technology: Topology optimisation, numerical analysis and experiments	117838
Shayanfar, Javad / Barros, Joaquim A. O. / Rezazadeh, Mohammadali	Design-oriented stress–strain model for RC columns with dual FRP- steel confinement mechanism	117821
Hao, Tengyuan / Mustafa, Javid / Gray, Garrett / Hossain, Zubaer	Effective modulus of 3D-printable curvilinear fiber reinforced composites	117811
Zhang, Bing / Peng, Yutao / Zhang, Sumei / Lin, Shuhong / Zhou, Chong / Lin, Guan	Elliptical concrete-filled FRP tubes with an embedded H-shaped steel under axial compression and cyclic lateral loading: Experimental study and modelling	117839
Cózar, I. R. / Otero, F. / Maimí, P. / González, E. V. / Turon, A. / Camanho, P. P.	An enhanced constitutive model to predict plastic deformation and multiple failure mechanisms in fibre-reinforced polymer composite materials	117696
Kim, Sun Won / Lim, Jae Hyuk / Kim, Seong Su	Enhanced prediction of transverse mechanical behavior of unidirectional fiber-reinforced composites using new spatial descriptors based on deep neural networks	117870
Xu, Jiale / Jiang, Zhouyu / Yang, Mingzhu / Zhang, Xiaowen / Wang, Mingliang	Experimental and simulation study on surface material stripping of glass fiber reinforced composites by baking soda abrasive jetting technology	117842
Canegrati, A. / Bernasconi, A. / Martulli, L. M. / Barriga, P. / Previati, G. / Fiumarella, D. / Scattina, A. / Spini, E. / Belingardi, G. / Mastinu, G.	Experimental characterization of a Polymer Metal Hybrid (PMH) automotive structure under quasi-static, creep, and impact loading	117813
Cao, Jincheng / Wu, Fangwen / Lei, Song / Fan, Xiangyan / Liu, Laijun / Li, Zirun / Chen, Ao	Experimental study on the bonding performance of engineered cementitious composites to normal concrete interface subjected to salt freeze–thaw cycles	117828
Lei, Zuxiang / Pan, Rui / Sun, Weikang / Dong, Yawei / Wan, Yun / Yin, Binbin	Fatigue damage mechanisms and evolution of residual tensile strength in CFRP Composites: Stacking sequence effect	117818
Chen, Feng / Tang, Zhen-Hua / Zhu, Yu / Deng, Jian-Qiang / Li, Yuan-Qing / Fu, Ya-Qin / Fu, Shao-Yun	Gradient shear thickening gel/Kevlar fabric multi-layer armor with enhanced impact attenuation property	117829
Wang, Xiaofei / He, Yang / Xiao, Xinli / Zhao, Wei / Leng, Jinsong	High-Tg shape memory polyimide composites with “spot-plane” directional thermally conduction structure based on AlN nanoparticles and acidified graphene	117846
Yao, Liaojun / Wang, Jiexiong / He, Yonglyu / Zhao, Xiuhui / Chen, Xiangming / Liu, Jurui / Guo, Licheng / Alderliesten, R. C.	Hygrothermal effects on fatigue delamination behavior in composite laminates	117830
Vogl, Sylvester / Knott, Ralf / Sommacal, Silvano / Compston, Paul / Drechsler, Klaus	Influence of compaction and curing in the Automated Fiber Placement Process on the mechanical performance of composite laminates	117826
Hadj-Djilani, Abdelhadi / Toubal, Lotfi / Bouguerara, Habiba / Zitoune, Rédouane	Investigating the influence of High-Void content on the impact and Post-Impact properties of Flax/Epoxy composite laminates with different stacking configurations	117832
Gao, Guijia / Lu, Haibiao / Sha, Chunhui / Ren, Weili / Zhong, Yunbo / Lei, Zuosheng	Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions	117833
Zhao, Shuaixing / Lin, Shan / Dong, Miao / Guo, Hongwei / Zheng, Hong	Mass lumping schemes fitted to MLS-based numerical manifold method in vibration of plates with cutouts using CPT and FSDT	117815
He, Pei / Moreira Arouche, Marcio / Koetsier, Mathieu / Pavlović, Marko	Mode I fracture behavior of glass fiber composite-steel bonded interface – Experiments and CZM	117814
Huang, Yao / Hui Wu, Jiu / Yang, Shao Kun / Wang, Li Bo / Ma, Fuyin	Multiple blast resistance enhancement through negative-mass meta-honeycombs with multi-resonator	117845
Yang, Danhui / Sun, Yu / Zhou, Jin / Wei, Gongshuai / Guan, Zhongwei / Chen, Xuefeng	A multiscale interfacial cyclic debonding model for fibre-reinforced composites using micromechanics and molecular dynamics	117831
Liang, Yanan / Zheng, Shijie / Wang, Hongtao / Chen, Dejin	Nonlinear isogeometric analysis of axially functionally graded graphene platelet-reinforced composite curved beams	117871
Hejazi, Moheldeen / Sari, Ali	Numerical and experimental assessment of optimal modeling of laminated glass post-breakage response	117822
Rao, Jie / Guo, Ran / Zhang, Rui	The numerical simulation of particulate reinforced composites by using a two-dimensional VCFEM formulated with plastic, thermal, and creep strain	117825
Li, Weiwen / Wu, Meizhong / Hu, Biao / Wang, Peng	Overcoming the brittleness of shear failure: A new FRP-RSC strengthening philosophy	117857
Eliasson, Sara / Hultgren, Gustav / Barsoum, Zuheir / Wennhage, Per	Probabilistic fatigue strength assessment of cross-ply laminates: Exploring effects of manufacturing defects through a two-scale modeling approach	117844
Karami, Behrouz / Ghayesh, Mergen H. / Fantuzzi, Nicholas	Quasi-3D free and forced vibrations of poroelastic microplates in the framework of modified couple stress theory	117840
Hui, Xinyu / Xu, Yingjie / Niu, Jianwen / Zhang, Weihong	Rapid evaluation and prediction of cure-induced residual stress of composites based on cGAN deep learning model	117827
Ivančević, D. / Ratković, J. / Giannaros, E.	Strain rate-dependent failure modelling of impact damage in laminated CFRP structures	117817
Wei, Shibo / Zhang, Xiaoqiong / Li, Yan / Wang, Tao / Huang, Qingxue / Liu, Cuirong / Guan, Hailu	Study of the dynamic response and damage evolution of carbon fiber/ultra-thin stainless-steel strip fiber metal laminates under low-velocity impact	117772
Di Cara, G. / D’Ottavio, M. / Polit, O.	Variable kinematics finite plate elements for the buckling analysis of sandwich composite panels	117856
Si, Yanpeng / Sun, Lishuai / Chen, Junzhen / Zhao, Zhiyong / Jiang, Jianjun / Li, Yujun	A viscoelastic-plastic model for the temperature-dependent creep and recovery behavior during dry fiber fabric compaction	117843

Autor(en)

Titel

Seite(n)

Kumar, Abhijeet / Haldar, Ayan / Weaver, Paul M.

An adaptive metastructure concept using bistable composite laminates

117767

Wu, Xiaoli / Li, Yunyi / Yin, Ting / Liao, Yijun / Mo, Site / Huang, Wanxia

The alignment of CNTs perpendicular to electric filed resulted in effective electrothermal de/anti-icing performance at high voltage for CNT/XLPE composites

117835

Jiang, Yulin / Yang, Lu / Li, Chaofeng / Miao, Xueyang

Analysis and experiments of bi-stable laminate configuration control based on MFC piezoelectric actuation

117820

Ji, Haibo / Wang, Xin / Tang, Nianhua / Li, Bingyang / Li, Zhen / Geng, Xinyu / Wang, Pengfei / Zhang, Rui / Lu, Tian Jian

Ballistic perforation of aramid laminates: Projectile nose shape sensitivity

117807

Grotz, Leana / Kirane, Kedar

Characterizing compressive failure mechanisms and their transitions in woven composites under on and off-axis loading

117848

Farrokhabadi, Amin / Chronopoulos, Dimitrios

Composite curved hourglass cellular structures: Design optimization for stiffness response and crashworthiness performance

117834

Mehdipour, Hadi / Bastami, Abbas Rohani / Soorgee, Mohammad Hossein

Comprehensive 3-D homogenization approach for predicting mechanical properties and creep behavior of polymer nanocomposites reinforced with graphene nanoplatelets

117823

Liu, Xiaofeng / Sun, Wei / Liu, Honghao / Du, Dongxu / Ma, Hongwei / Li, Hui

Coupled vibration analysis of bolted variable angle tow plates under combined nonlinear effects

117847

Sheikhi, Mohammad / Anamagh, Mirmeysam Rafiei / Bediz, Bekir / Tunc, Lutfi Taner

Design of manufacturable variable stiffness composite laminates using spectral Chebyshev and normalized cut segmentation methods

117836

Montemurro, Marco / Alaimo, Gianluca / Panettieri, Enrico / Catapano, Anita / Carraturo, Massimo / Auricchio, Ferdinando

Design of multi-material structures using material jetting technology: Topology optimisation, numerical analysis and experiments

117838

Shayanfar, Javad / Barros, Joaquim A. O. / Rezazadeh, Mohammadali

Design-oriented stress–strain model for RC columns with dual FRP- steel confinement mechanism

117821

Hao, Tengyuan / Mustafa, Javid / Gray, Garrett / Hossain, Zubaer

Effective modulus of 3D-printable curvilinear fiber reinforced composites

117811

Zhang, Bing / Peng, Yutao / Zhang, Sumei / Lin, Shuhong / Zhou, Chong / Lin, Guan

Elliptical concrete-filled FRP tubes with an embedded H-shaped steel under axial compression and cyclic lateral loading: Experimental study and modelling

117839

Cózar, I. R. / Otero, F. / Maimí, P. / González, E. V. / Turon, A. / Camanho, P. P.

An enhanced constitutive model to predict plastic deformation and multiple failure mechanisms in fibre-reinforced polymer composite materials

117696

Kim, Sun Won / Lim, Jae Hyuk / Kim, Seong Su

Enhanced prediction of transverse mechanical behavior of unidirectional fiber-reinforced composites using new spatial descriptors based on deep neural networks

117870

Xu, Jiale / Jiang, Zhouyu / Yang, Mingzhu / Zhang, Xiaowen / Wang, Mingliang

Experimental and simulation study on surface material stripping of glass fiber reinforced composites by baking soda abrasive jetting technology

117842

Canegrati, A. / Bernasconi, A. / Martulli, L. M. / Barriga, P. / Previati, G. / Fiumarella, D. / Scattina, A. / Spini, E. / Belingardi, G. / Mastinu, G.

Experimental characterization of a Polymer Metal Hybrid (PMH) automotive structure under quasi-static, creep, and impact loading

117813

Cao, Jincheng / Wu, Fangwen / Lei, Song / Fan, Xiangyan / Liu, Laijun / Li, Zirun / Chen, Ao

Experimental study on the bonding performance of engineered cementitious composites to normal concrete interface subjected to salt freeze–thaw cycles

117828

Lei, Zuxiang / Pan, Rui / Sun, Weikang / Dong, Yawei / Wan, Yun / Yin, Binbin

Fatigue damage mechanisms and evolution of residual tensile strength in CFRP Composites: Stacking sequence effect

117818

Chen, Feng / Tang, Zhen-Hua / Zhu, Yu / Deng, Jian-Qiang / Li, Yuan-Qing / Fu, Ya-Qin / Fu, Shao-Yun

Gradient shear thickening gel/Kevlar fabric multi-layer armor with enhanced impact attenuation property

117829

Wang, Xiaofei / He, Yang / Xiao, Xinli / Zhao, Wei / Leng, Jinsong

High-Tg shape memory polyimide composites with “spot-plane” directional thermally conduction structure based on AlN nanoparticles and acidified graphene

117846

Yao, Liaojun / Wang, Jiexiong / He, Yonglyu / Zhao, Xiuhui / Chen, Xiangming / Liu, Jurui / Guo, Licheng / Alderliesten, R. C.

Hygrothermal effects on fatigue delamination behavior in composite laminates

117830

Vogl, Sylvester / Knott, Ralf / Sommacal, Silvano / Compston, Paul / Drechsler, Klaus

Influence of compaction and curing in the Automated Fiber Placement Process on the mechanical performance of composite laminates

117826

Hadj-Djilani, Abdelhadi / Toubal, Lotfi / Bouguerara, Habiba / Zitoune, Rédouane

Investigating the influence of High-Void content on the impact and Post-Impact properties of Flax/Epoxy composite laminates with different stacking configurations

117832

Gao, Guijia / Lu, Haibiao / Sha, Chunhui / Ren, Weili / Zhong, Yunbo / Lei, Zuosheng

Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions

117833

Zhao, Shuaixing / Lin, Shan / Dong, Miao / Guo, Hongwei / Zheng, Hong

Mass lumping schemes fitted to MLS-based numerical manifold method in vibration of plates with cutouts using CPT and FSDT

117815

He, Pei / Moreira Arouche, Marcio / Koetsier, Mathieu / Pavlović, Marko

Mode I fracture behavior of glass fiber composite-steel bonded interface – Experiments and CZM

117814

Huang, Yao / Hui Wu, Jiu / Yang, Shao Kun / Wang, Li Bo / Ma, Fuyin

Multiple blast resistance enhancement through negative-mass meta-honeycombs with multi-resonator

117845

Yang, Danhui / Sun, Yu / Zhou, Jin / Wei, Gongshuai / Guan, Zhongwei / Chen, Xuefeng

A multiscale interfacial cyclic debonding model for fibre-reinforced composites using micromechanics and molecular dynamics

117831

Liang, Yanan / Zheng, Shijie / Wang, Hongtao / Chen, Dejin

Nonlinear isogeometric analysis of axially functionally graded graphene platelet-reinforced composite curved beams

117871

Hejazi, Moheldeen / Sari, Ali

Numerical and experimental assessment of optimal modeling of laminated glass post-breakage response

117822

Rao, Jie / Guo, Ran / Zhang, Rui

The numerical simulation of particulate reinforced composites by using a two-dimensional VCFEM formulated with plastic, thermal, and creep strain

117825

Li, Weiwen / Wu, Meizhong / Hu, Biao / Wang, Peng

Overcoming the brittleness of shear failure: A new FRP-RSC strengthening philosophy

117857

Eliasson, Sara / Hultgren, Gustav / Barsoum, Zuheir / Wennhage, Per

Probabilistic fatigue strength assessment of cross-ply laminates: Exploring effects of manufacturing defects through a two-scale modeling approach

117844

Karami, Behrouz / Ghayesh, Mergen H. / Fantuzzi, Nicholas

Quasi-3D free and forced vibrations of poroelastic microplates in the framework of modified couple stress theory

117840

Hui, Xinyu / Xu, Yingjie / Niu, Jianwen / Zhang, Weihong

Rapid evaluation and prediction of cure-induced residual stress of composites based on cGAN deep learning model

117827

Ivančević, D. / Ratković, J. / Giannaros, E.

Strain rate-dependent failure modelling of impact damage in laminated CFRP structures

117817

Wei, Shibo / Zhang, Xiaoqiong / Li, Yan / Wang, Tao / Huang, Qingxue / Liu, Cuirong / Guan, Hailu

Study of the dynamic response and damage evolution of carbon fiber/ultra-thin stainless-steel strip fiber metal laminates under low-velocity impact

117772

Di Cara, G. / D’Ottavio, M. / Polit, O.

Variable kinematics finite plate elements for the buckling analysis of sandwich composite panels

117856

Si, Yanpeng / Sun, Lishuai / Chen, Junzhen / Zhao, Zhiyong / Jiang, Jianjun / Li, Yujun

A viscoelastic-plastic model for the temperature-dependent creep and recovery behavior during dry fiber fabric compaction

117843

Anzeige

Composite Structures - Februar 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Februar 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.