Composite Structures - Juli 2023

Erschienen:	Juli 2023

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Fallah, Ali / Asif, Suleman / Gokcer, Gizem / Koc, Bahattin	4D printing of continuous fiber-reinforced electroactive smart composites by coaxial additive manufacturing	117034
Lu, Shimin / Evans, Anthony / Turner, Thomas	Analysis of roller compaction pressure distribution in automated dry fibre placement	117048
Li, Zhiyong / Xue, Yousong / Sun, Baozhong / Gu, Bohong	Ballistic penetration damage for hybrid carbon/Kevlar/UHMWPE fiber laminated composites: Experimental and numerical techniques	117037
Kumar, Sumodh / Ramesh, M. R. / Jeyaraj, P. / Doddamani, Mrityunjay	Buckling and dynamic responses of 3D printed nanocomposites and their graded variants	117031
Wang, Chenyu / Nagashima, Toshio	Damage propagation analysis of CFRP laminate by quasi-3D XFEM using hexahedral elements	117024
Akhzeroun, Abdelhafid / Semcha, Abdelaziz / Bezazi, Abderrezak / Boumediri, Haithem / Reis, Paulo N. B. / Scarpa, Fabrizio	Development and characterization of a new sustainable composite reinforced with date palm stems for rehabilitation and reconstruction of earthen built heritage	117015
Majano-Majano, A. / Lara-Bocanegra, A. J. / Pereira, F. / Xavier, J. / Morais, J. / de Moura, M. F. S. F.	Direct and inverse cohesive law identification of hardwood bonded joints with 1C-PUR adhesive using DCB test	117013
Gomes, Guilherme Ferreira / Ribeiro Junior, Ronny Francis / Pereira, João Luiz Junho / Francisco, Matheus Brendon	An efficient deep learning model to predict the structural response of CFRP isogrid tubes	117043
Kuznetsova, Tatyana / Lapitskaya, Vasilina / Khabarava, Anastasiya / Trukhan, Ruslan / Chizhik, Sergei / Torskaya, Elena / Fyodorov, Sergei / Aizikovich, Sergei / Sadyrin, Evgeniy / Warcholinski, Bogdan	Features of wear of DLC-Si coating under microcontact conditions during the formation of secondary structures	117039
Yang, Hanming / Zou, Chenqi / Huang, Minfei / Zang, Mengyan / Chen, Shunhua	High-fidelity computational modeling of scratch damage in automotive coatings with machine learning-driven identification of fracture parameters	117027
Yazdanparast, Reza / Rafiee, Roham	Investigating the influence of pull-out speed on the interfacial properties and the pull-out behavior of CNT/polymer nanocomposites	117049
Xiao, Yihao / Shao, Zhushan / Wei, Wei	Investigation of thermally-induced separation in mortar-aggregate under microwave irradiation	117035
He, Shaohua / Xu, Yangming / Zhong, Huaqian / Mosallam, Ayman S. / Chen, Zhou	Investigation on interfacial anti-sliding behavior of high strength steel-UHPC composite beams	117036
Furtmüller, Thomas / Adam, Christoph	A linear finite element for timber–concrete layered beams with interlayer slip	117045
Movahedi, N. / Murch, G. E. / Belova, I. V. / Fiedler, T.	Manufacturing and compressive properties of sandwich foam tubes containing metal syntactic foam	117012
Guillon, Damien / Espinassou, Denis / Pichon, Pierre / Rojas Carrillo, Juan Javier / Landry, Charlotte / Clainchard, David / Juras, Laurent / Brault, Romain	Manufacturing, burst test and modeling of high pressure thermoplastic composite overwrap pressure vessel	116965
Du, Yuntong / Keller, Thomas / Zhu, Yifeng / Wei, Pengyu / Wang, Yan / Xiong, Jian	Mechanical behavior and failure of carbon fiber-reinforced composite sandwich structure inspired by curved-crease origami	117033
Wang, Yulin / Li, Huimin / Tang, Zi-Jia / Zhao, Fei / Fang, Dainnig	Mechanical performances of composite orthogrid stiffened cylinder manufactured by an improved method	117044
Cao, Yuejie / Zhi, Jie / Zuo, Duquan / Li, Xiang / Cao, Zengqiang / Wang, Yonghu / Tay, T. E.	Mesoscale modelling of progressive damage and failure in single-lap and double-lap thin-ply laminated composite bolted joints	117046
Xu, Guanhua / Gu, Tianhao / Zhao, Dongjie / Li, Xiaoguang	Modeling on displacement response and damage mechanism of contact interface during installation for composites sleeved interference joint	117025
Thai, Chien H. / Fereira, A. M. J. / Nguyen-Xuan, H. / Hung, P. T. / Phung-Van, P.	A nonlocal strain gradient isogeometric model for free vibration analysis of magneto-electro-elastic functionally graded nanoplates	117005
Abolfazli, Milad / Bazli, Milad / Rajabipour, Ali / Heitzmann, Michael / Pourasiabi, Hamid / Wang, Hao / Arashpour, Mehrdad	Residual compressive strength of filament wound hybrid glass/carbon fibre reinforced polymer tubes after exposure to elevated temperature	117050
Solazzi, Luigi / Bertoli, Davide / Ghidini, Lorenzo	Static and dynamic study of the industrial vehicle transmission adopting composite materials	117042
Zhou, Yingwu / Ye, Zenghui / Zhao, Debo / Huang, Zhenyu / Yang, Lei	Static and multi-impact performances of RC beams strengthened with large rupture-strain FRP composites	117053
Pitchai, Pandi / Harursampath, Dineshkumar / Guruprasad, P. J.	Stochastic analysis of a three phase composite using variational asymptotic based homogenization technique coupled with stochastic reduced order model	117040
Saimi, Ahmed / Bensaid, Ismail / Civalek, Ömer	A study on the crack presence effect on dynamical behaviour of bi-directional compositionally imperfect material graded micro beams	117032
Dong, Pan / Ma, Yanli / Zhang, Xuyao / He, Yi / Zhao, Ziyuan / Ma, Jianzuo / Li, Weiguo / Li, Yile	Theoretical prediction method of Young's modulus and yield strength of micron particle reinforced metal matrix composites at different temperatures	117051
Crespo-Miguel, J. / Garcia-Gonzalez, D. / Robles, G. / Hossain, M. / Martinez-Tarifa, J. M. / Arias, A.	Thermo-electro-mechanical aging and degradation of conductive 3D printed PLA/CB composite	116992
Silva, Andre Luis Ferreira da / Salas, Ruben Andres / Silva, Emílio Carlos Nelli	Topology Optimization of fiber reinforced structures considering stress constraint and optimized penalization	117006
Mao, Chao / Zhang, Rui / Guo, Ran / Zhao, Xiaofang	Two-scale modeling of particle crack initiation and propagation in particle-reinforced composites by using microscale analysis based on Voronoi cell finite element model	116989
Lakhiar, Muhammad Tahir / Kong, Sih Ying / Bai, Yu / Miah, Md Jihad / Syamsir, Agusril	Web crippling performance of pultruded GFRP C sections strengthened by fibre-reinforced epoxy composite	117047

Über diese
Datenseite
IssueID
70091
Veröffentlicht am:
30.05.2023
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - Juli 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Juli 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.