Composite Structures - März 2023

Erschienen:	März 2023

Autor(en)	Titel	Seite(n)
Zhi, Quan / Li, Dongsheng / Sun, Henglun / Zhu, Weijun	Adjustment of multi-directional elastic properties of chiral metamaterial via a 3D printing-based soft-hard bi-material strategy	116646
Lu, Jiuru / Xu, Luyao / Xu, Haojie / Li, Kangmei / Hu, Jun	Buckling analysis of variable-stiffness composite truncated elliptical rotary shell under external hydrostatic compression	116613
Ruocco, E. / Reddy, J. N.	A closed-form solution for accurate stress analysis of functionally graded Reddy beams	116676
Zhang, Nan / Zhai, Mengsheng / Zeng, Liang / Huang, Liping / Lin, Jing	Damage assessment in composite laminates with the Lamb wave factorization method	116642
Wu, Zhenyu / Qin, Shuang / Zhang, Panyou / Pan, Zhongxiang / Hu, Xudong / Shi, Lin	Damage evolution in braided composite tubes under axial compression studied by combining infrared thermography and X-ray computed tomography	116634
Liu, Bo / Zhou, Yunfei	Damage failure mechanism of unidirectional fiber reinforced SiCf/SiC composites under uniaxial tension	116610
Zhang, Zheng / Xu, Jiaze / Ma, Yonglong / Sun, Min / Chai, Hao / Wu, Huaping / Jiang, Shaofei	Design and analysis of multistable curvilinear-fiber laminates based on continuous fiber 3D printing of thermosetting resin matrix	116616
Kajihara, Sho / Yokozeki, Tomohiro / Aoki, Takahira	Dimension effects on the stowability and self-deployment behavior of CFRP bistable open-section semi-cylindrical beam	116628
van de Velde, Arne / Maeyens, Jan / Ivens, Jan / Coppieters, Sam	The effect of the setting force on the static strength of a blind rivet nut set in CFRP	116640
Li, Xiaoda / Zhu, Miaochang / Liu, Zongchao / Deng, Jun	EMI-based interfacial damage evolution of CFRP plates-strengthened RC beams under low-cycle fatigue loading and wetting/drying cycles	116653
Petrolo, M. / Augello, R. / Carrera, E. / Scano, D. / Pagani, A.	Evaluation of transverse shear stresses in layered beams/plates/shells via stress recovery accounting for various CUF-based theories	116625
Mohabeddine, Anis / Malik, Ghassan / Correia, José / Silva, Filipe / de Jesús, Abílio / Fantuzzi, Nicholas / Castro, José Miguel	Experimental parametric investigation on the behavior of adhesively bonded CFRP/steel joints	116598
Chen, Qiang / Chatzigeorgiou, George / Meraghni, Fodil	Extended mean-field homogenization of unidirectional piezoelectric nanocomposites with generalized Gurtin-Murdoch interfaces	116639
Rajaneesh, A. / Ravailler, F. / Preud'homme, N. / Bruyneel, M.	Failure analysis of woven composites using physically based modified mesomodel	116643
Qi, Songming / Alajarmeh, Omar / Shelley, Tristan / Schubel, Peter / Rendle-Short, Kendric / Zeng, Xuesen	Fibre waviness characterisation and modelling by Filtered Canny Misalignment Analysis (FCMA)	116666
Zhao, Yang / Wu, Qianqian / Wu, Linzhi	Flexural mechanical properties of Ti-6Al-4V multilayer micro-lattice biomaterials for skull repair	116638
Wang, Xiaodong / Liu, Na / Zhou, Jingze / Li, Zengshan / Meng, Qingchun / Guan, Zhidong / Du, Shanyi	Highly efficient simulation of composites by determining failure initiation and fracture angle with artificial neural networks	116644
Liao, Yingqian / Martins, Joaquim R. R. A. / Young, Yin Lu	Hydrostructural optimization of single-layer and multi-layer composite lifting surfaces	116650
Morano, Chiara / Wagih, Ahmed / Alfano, Marco / Lubineau, Gilles	Improving performance of composite/metal T-joints by using corrugated aluminum stiffeners	116652
Ke, Jun / Chen, Lan / Gao, Jin / Wu, Zhen-Yu	Improving the dynamic stiffness and vibration characteristics of 3D orthogonal woven by implanting SMA instead of a warp yarn	116637
Song, Yingying / Qu, Zhaoliang / Liao, Haitao / Ai, Shigang	Material twins generation of woven polymer composites based on ResL-U-Net convolutional neural networks	116672
Pan, Molan / Wang, Daiyu / Pei, Weichang / Wang, Zhenyu	Monotonic and cyclic compression behavior of axially loaded FRP-confined concrete-encased cross-shaped steel columns	116632
Kheng, Eugene / D’Mello, Royan / Waas, Anthony	A multi-scale model for the tensile failure of twill textile composites	116614
Beheshti, Alireza / Ansari, Reza	Nonlinear dynamic analysis of unsymmetric layered composite shells	116627
Le, Cong Ich / Nguyen, Dinh Kien	Nonlinear vibration of three-phase bidirectional functionally graded sandwich beams with influence of homogenization scheme and partial foundation support	116649
Alonso, L. / Solis, A. / Garcia-Castillo, S. K.	A numerical–analytical study to determine a suitable distribution of plies in sandwich structures subjected to high-velocity impact	116645
Fu, Yun-Fei / Reiner, Johannes	Objective and automated calibration of progressive damage models for finite element simulation of fiber reinforced composites	116618
Peng, Xiang / Wang, Mingbo / Yi, Bing / Li, Jiquan / Wu, Huaping / Jiang, Shaofei	Optimization design of stacking sequence and material distribution for variable thickness hybrid composite structure based on improved stacking sequence table	116641
Turpin, Léonard / Roux, Stéphane / Bénézech, Jean / Couegnat, Guillaume / King, Andrew / Caty, Olivier / Denneulin, Sébastien / Martin, Eric	Quantitative thermomechanical characterisation of 3D-woven SiC/SiC composites from in-situ tomographic and thermographic imaging	116626
Zou, Jianchao / Lei, Zhenkun / Liu, Da / Hong, Xiang / Shang, Yuxiang / Bai, Ruixiang	Rapid prediction of compression after impact properties of composite structures: An equivalent strategy for impact damage	116655
Zhou, Yingwu / Wang, Xiaohan / Yuan, Fang / Hu, Biao / Zhu, Zhongfeng	Seismic retrofitting of coastal structural columns with steel bars locally corroded to fracture using sprayed ECC overlays and FRP jackets	116670
Zeng, Jun-Jie / Pan, Bai-Zhao / Fan, Tian-Hui / Zhuge, Yan / Liu, Feng / Li, Li-Juan	Shear behavior of FRP-UHPC tubular beams	116576
Mukhtar, Faisal / Deifalla, Ahmed	Shear strength of FRP reinforced deep concrete beams without stirrups: Test database and a critical shear crack-based model	116636
Lin, Qida / Zhou, Jiaxi / Wang, Kai / Xu, Daolin / Wen, Guilin / Wang, Qiang	Three-dimensional quasi-zero-stiffness metamaterial for low-frequency and wide complete band gap	116656
Fu, Peilin / Zhao, Jizhong / Zhang, Xu / Miao, Hongchen / Wen, Zefeng / Kang, Guozheng / Kan, Qianhua	Three-dimensional tractive rolling contact analysis of functionally graded coating-substrate systems with interfacial imperfection and frictional anisotropy	116671
Shayanfar, Javad / Kafshgarkolaei, Hassan Jafarian / Barros, Joaquim A. O. / Rezazadeh, Mohammadali	Unified strength model for FRP confined heat-damaged circular and square concrete columns	116647
He, Huguang / Li, Yu / Liu, Yang / Shi, Dongyu / Fan, Hualin	Vibration suppression and impact mitigation of locally resonant composite metamaterial columns	116631
Gao, Yifan / Geng, Peihao / Cheng, Peng / Ma, Ninshu / Fujikubo, Mashiko / Bai, Yong	Wet collapse mechanism of steel-reinforced flexible pipe structures under curvature effect: Physical experimentation and numerical simulation	116539

Autor(en)

Titel

Seite(n)

Zhi, Quan / Li, Dongsheng / Sun, Henglun / Zhu, Weijun

Adjustment of multi-directional elastic properties of chiral metamaterial via a 3D printing-based soft-hard bi-material strategy

116646

Lu, Jiuru / Xu, Luyao / Xu, Haojie / Li, Kangmei / Hu, Jun

Buckling analysis of variable-stiffness composite truncated elliptical rotary shell under external hydrostatic compression

116613

Ruocco, E. / Reddy, J. N.

A closed-form solution for accurate stress analysis of functionally graded Reddy beams

116676

Zhang, Nan / Zhai, Mengsheng / Zeng, Liang / Huang, Liping / Lin, Jing

Damage assessment in composite laminates with the Lamb wave factorization method

116642

Wu, Zhenyu / Qin, Shuang / Zhang, Panyou / Pan, Zhongxiang / Hu, Xudong / Shi, Lin

Damage evolution in braided composite tubes under axial compression studied by combining infrared thermography and X-ray computed tomography

116634

Liu, Bo / Zhou, Yunfei

Damage failure mechanism of unidirectional fiber reinforced SiCf/SiC composites under uniaxial tension

116610

Zhang, Zheng / Xu, Jiaze / Ma, Yonglong / Sun, Min / Chai, Hao / Wu, Huaping / Jiang, Shaofei

Design and analysis of multistable curvilinear-fiber laminates based on continuous fiber 3D printing of thermosetting resin matrix

116616

Kajihara, Sho / Yokozeki, Tomohiro / Aoki, Takahira

Dimension effects on the stowability and self-deployment behavior of CFRP bistable open-section semi-cylindrical beam

116628

van de Velde, Arne / Maeyens, Jan / Ivens, Jan / Coppieters, Sam

The effect of the setting force on the static strength of a blind rivet nut set in CFRP

116640

Li, Xiaoda / Zhu, Miaochang / Liu, Zongchao / Deng, Jun

EMI-based interfacial damage evolution of CFRP plates-strengthened RC beams under low-cycle fatigue loading and wetting/drying cycles

116653

Petrolo, M. / Augello, R. / Carrera, E. / Scano, D. / Pagani, A.

Evaluation of transverse shear stresses in layered beams/plates/shells via stress recovery accounting for various CUF-based theories

116625

Mohabeddine, Anis / Malik, Ghassan / Correia, José / Silva, Filipe / de Jesús, Abílio / Fantuzzi, Nicholas / Castro, José Miguel

Experimental parametric investigation on the behavior of adhesively bonded CFRP/steel joints

116598

Chen, Qiang / Chatzigeorgiou, George / Meraghni, Fodil

Extended mean-field homogenization of unidirectional piezoelectric nanocomposites with generalized Gurtin-Murdoch interfaces

116639

Rajaneesh, A. / Ravailler, F. / Preud'homme, N. / Bruyneel, M.

Failure analysis of woven composites using physically based modified mesomodel

116643

Qi, Songming / Alajarmeh, Omar / Shelley, Tristan / Schubel, Peter / Rendle-Short, Kendric / Zeng, Xuesen

Fibre waviness characterisation and modelling by Filtered Canny Misalignment Analysis (FCMA)

116666

Zhao, Yang / Wu, Qianqian / Wu, Linzhi

Flexural mechanical properties of Ti-6Al-4V multilayer micro-lattice biomaterials for skull repair

116638

Wang, Xiaodong / Liu, Na / Zhou, Jingze / Li, Zengshan / Meng, Qingchun / Guan, Zhidong / Du, Shanyi

Highly efficient simulation of composites by determining failure initiation and fracture angle with artificial neural networks

116644

Liao, Yingqian / Martins, Joaquim R. R. A. / Young, Yin Lu

Hydrostructural optimization of single-layer and multi-layer composite lifting surfaces

116650

Morano, Chiara / Wagih, Ahmed / Alfano, Marco / Lubineau, Gilles

Improving performance of composite/metal T-joints by using corrugated aluminum stiffeners

116652

Ke, Jun / Chen, Lan / Gao, Jin / Wu, Zhen-Yu

Improving the dynamic stiffness and vibration characteristics of 3D orthogonal woven by implanting SMA instead of a warp yarn

116637

Song, Yingying / Qu, Zhaoliang / Liao, Haitao / Ai, Shigang

Material twins generation of woven polymer composites based on ResL-U-Net convolutional neural networks

116672

Pan, Molan / Wang, Daiyu / Pei, Weichang / Wang, Zhenyu

Monotonic and cyclic compression behavior of axially loaded FRP-confined concrete-encased cross-shaped steel columns

116632

Kheng, Eugene / D’Mello, Royan / Waas, Anthony

A multi-scale model for the tensile failure of twill textile composites

116614

Beheshti, Alireza / Ansari, Reza

Nonlinear dynamic analysis of unsymmetric layered composite shells

116627

Le, Cong Ich / Nguyen, Dinh Kien

Nonlinear vibration of three-phase bidirectional functionally graded sandwich beams with influence of homogenization scheme and partial foundation support

116649

Alonso, L. / Solis, A. / Garcia-Castillo, S. K.

A numerical–analytical study to determine a suitable distribution of plies in sandwich structures subjected to high-velocity impact

116645

Fu, Yun-Fei / Reiner, Johannes

Objective and automated calibration of progressive damage models for finite element simulation of fiber reinforced composites

116618

Peng, Xiang / Wang, Mingbo / Yi, Bing / Li, Jiquan / Wu, Huaping / Jiang, Shaofei

Optimization design of stacking sequence and material distribution for variable thickness hybrid composite structure based on improved stacking sequence table

116641

Turpin, Léonard / Roux, Stéphane / Bénézech, Jean / Couegnat, Guillaume / King, Andrew / Caty, Olivier / Denneulin, Sébastien / Martin, Eric

Quantitative thermomechanical characterisation of 3D-woven SiC/SiC composites from in-situ tomographic and thermographic imaging

116626

Zou, Jianchao / Lei, Zhenkun / Liu, Da / Hong, Xiang / Shang, Yuxiang / Bai, Ruixiang

Rapid prediction of compression after impact properties of composite structures: An equivalent strategy for impact damage

116655

Zhou, Yingwu / Wang, Xiaohan / Yuan, Fang / Hu, Biao / Zhu, Zhongfeng

Seismic retrofitting of coastal structural columns with steel bars locally corroded to fracture using sprayed ECC overlays and FRP jackets

116670

Zeng, Jun-Jie / Pan, Bai-Zhao / Fan, Tian-Hui / Zhuge, Yan / Liu, Feng / Li, Li-Juan

Shear behavior of FRP-UHPC tubular beams

116576

Mukhtar, Faisal / Deifalla, Ahmed

Shear strength of FRP reinforced deep concrete beams without stirrups: Test database and a critical shear crack-based model

116636

Lin, Qida / Zhou, Jiaxi / Wang, Kai / Xu, Daolin / Wen, Guilin / Wang, Qiang

Three-dimensional quasi-zero-stiffness metamaterial for low-frequency and wide complete band gap

116656

Fu, Peilin / Zhao, Jizhong / Zhang, Xu / Miao, Hongchen / Wen, Zefeng / Kang, Guozheng / Kan, Qianhua

Three-dimensional tractive rolling contact analysis of functionally graded coating-substrate systems with interfacial imperfection and frictional anisotropy

116671

Shayanfar, Javad / Kafshgarkolaei, Hassan Jafarian / Barros, Joaquim A. O. / Rezazadeh, Mohammadali

Unified strength model for FRP confined heat-damaged circular and square concrete columns

116647

He, Huguang / Li, Yu / Liu, Yang / Shi, Dongyu / Fan, Hualin

Vibration suppression and impact mitigation of locally resonant composite metamaterial columns

116631

Gao, Yifan / Geng, Peihao / Cheng, Peng / Ma, Ninshu / Fujikubo, Mashiko / Bai, Yong

Wet collapse mechanism of steel-reinforced flexible pipe structures under curvature effect: Physical experimentation and numerical simulation

116539

Anzeige

Composite Structures - März 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - März 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.