Composite Structures - Juni 2021

Erschienen:	Juni 2021

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Fazeli, S. / Stokes-Griffin, C. / Gilbert, J. / Compston, P.	An analytical solution for the vibrational response of stepped smart cross-ply laminated composite beams with experimental validation	113823
Oller, Eva / Kotynia, Renata / Mari, Antonio	Assessment of the existing models to evaluate the shear strength contribution of externally bonded frp shear reinforcements	113641
Ying, Jingwei / Huang, Yijie / Qin, Li / Gao, Xu / Wang, Zhankui	Axial compressive behavior of GFRP tube confined seawater coral aggregate concrete reinforced with epoxy-coated bars	113807
Fallah Pour, Ali / Ozbakkaloglu, Togay / Vincent, Thomas	Axial compressive behavior of ultra-high-strength steel fiber-reinforced concrete-filled fiber reinforced polymer (FRP) tube columns	113777
Doroudi, Y. / Fernando, D. / Hosseini, A. / Ghafoori, E.	Behavior of cracked steel plates strengthened with adhesively bonded CFRP laminates under fatigue Loading: Experimental and analytical study	113816
Li, Hao / Wang, Brad Jianhe / Wang, Libin / Wei, Peixing / Wei, Yang / Wang, Pengzhan	Characterizing engineering performance of bamboo-wood composite cross-laminated timber made from bamboo mat-curtain panel and hem-fir lumber	113785
Zeng, Jun-Jie / Liang, Sheng-Da / Li, Yong-Long / Guo, Yong-Chang / Shan, Guo-Yi	Compressive behavior of FRP-confined elliptical concrete-filled high-strength steel tube columns	113808
Feng, Yixin / Yong, Huadong / Zhou, Youhe	A concurrent multiscale framework based on self-consistent clustering analysis for cylinder structure under uniaxial loading condition	113827
Talele, Mohit / Haupt, Matthias / van Tooren, Michel / Elham, Ali	Concurrent stringer topology and skin steered fiber pattern optimization for grid stiffened composite shell structures	113804
Qiu, Zhenyu / Wang, Jingxuan / Jin, Fengnian / Fan, Hualin	Construction and structural performances of laminated bamboo arches	113799
Wang, Xiting / Ma, Lifeng / Wang, Yansong / Guo, Hui	Design of multilayer sound-absorbing composites with excellent sound absorption properties at medium and low frequency via constructing variable section cavities	113798
Wang, Guangding / Yuan, Huiqun	Dynamics and stability analysis of an axially functionally graded hollow rotor partially filled with liquid	113821
Wang, Bowen / Yu, Shundong / Mao, Jian / Wang, Yaohui / Li, Mengjia / Li, Xiping	Effect of basalt fiber on tribological and mechanical properties of polyether-ether-ketone (PEEK) composites	113847
Miao, Qiuyu / Dai, Zhihong / Ma, Guangyi / Niu, Fangyong / Wu, Dongjiang	Effect of consolidation force on interlaminar shear strength of CF/PEEK laminates manufactured by laser-assisted forming	113779
Ingle, Sagar / Yerramalli, Chandra Sekher / Guha, Anirban / Mishra, Sushil	Effect of material properties on ballistic energy absorption of woven fabrics subjected to different levels of inter-yarn friction	113824
Wang, Hao / Tao, Jie / Jin, Kai	The effect of MWCNTs with different diameters on the interface properties of Ti/CFRP fiber metal laminates	113818
Alabtah, Fatima Ghassan / Mahdi, E.	The effect of sizing optimization on the interface between high strength steel and fiber reinforced composite	113740
Malinowski, Paweł H. / Wandowski, Tomasz / Singh, Shishir K.	Employing principal component analysis for assessment of damage in GFRP composites using electromechanical impedance	113820
Katsamakas, Antonios A. / Papanikolaou, Vassilis K. / Thermou, Georgia E.	A FEM-based model to study the behavior of SRG-strengthened R/C beams	113796
Lambiase, Francesco / Balle, Frank / Blaga, Lucian-Attila / Liu, Fengchao / Amancio-Filho, Sergio T.	Friction-based processes for hybrid multi-material joining	113828
Liu, Tao / Li, Chaodong / Wang, Chao / Hu, Wenfeng / Bui, Tinh Quoc	Geometrically nonlinear isogeometric analysis of smart piezoelectric FG plates considering thermal effects of piezoelectric stress and dielectric constants	113795
Li, Zhixing / Wang, Yue / Sun, Xinyang / Guo, Licheng / Zhang, Li	Honeycomb-based method for generating random fiber distributions of fiber reinforced composites and transverse mechanical properties prediction	113794
Hu, Zheng / Vambol, Oleksii / Sun, Shiping	A hybrid multilevel method for simultaneous optimization design of topology and discrete fiber orientation	113791
Gholami, Meghdad / Afrasiab, Hamed / Baghestani, Ali Mohammad / Fathi, Alireza	Hygrothermal degradation of elastic properties of fiber reinforced composites: A micro-scale finite element analysis	113819
Li, Z. / Wang, B. L. / Wang, K. F. / Zheng, L.	Improving thermomechanical properties of cracked brittle honeycombs by negative Poisson’s ratio effect	113825
Xu, Jiang / Yang, Zhichun / Yang, Jie / Li, Yinghui	Influence of the boundary relaxation on the free vibration of rotating composite laminated Timoshenko beams	113690
Shao, Zhenyu / Jiang, Xinggang / Geng, Daxi / Liu, Yihang / Zhou, Zehua / Li, Shaomin / Zhang, Deyuan / Zheng, Wei	The interface temperature and its influence on surface integrity in ultrasonic-assisted drilling of CFRP/Ti stacks	113803
Suzuki, Kenta / Phenisee, Sean E. / Salviato, Marco	An isogeometric framework for the modeling of curvilinear anisotropic media	113771
Bedon, Chiara	Lateral-torsional buckling (LTB) method for the design of glass fins with continuous lateral restraints at the tensioned edge	113790
Camacho, Pedro / Akhavan, Hamed / Ribeiro, Pedro	Linear aeroelastic analysis of cantilever hybrid composite laminated plates with curvilinear fibres and carbon nanotubes	113765
Liu, Lulu / Cai, Ming / Luo, Gang / Zhao, Zhenhua / Chen, Wei	Macroscopic numerical simulation method of multi-phases STF impregnated Kevlar fabrics. Part 1: Quasi-static and dynamic mechanical test	113780
Hui, Xinyu / Xu, Yingjie / Wang, Jun / Zhang, Weihong	Microscale viscoplastic analysis of unidirectional CFRP composites under the influence of curing process	113786
Laux, Tobias / Gan, Khong Wui / Tavares, Rodrigo P. / Furtado, Carolina / Arteiro, Albertino / Camanho, Pedro P. / Thomsen, Ole T. / Dulieu-Barton, Janice M.	Modelling damage in multidirectional laminates subjected to multi-axial loading: Ply thickness effects and model assessment	113766
Huang, Yishuang / Wei, Peijun	Modelling the flexural waves in a nanoplate based on the fractional order nonlocal strain gradient elasticity and thermoelasticity	113793
Lopes Fernandes, Romina / Budzik, Michal K. / Benedictus, Rinze / Teixeira de Freitas, Sofia	Multi-material adhesive joints with thick bond-lines: Crack onset and crack deflection	113687
Zhang, Zheng / Liao, Chongjie / Chai, Hao / Ni, Xiangqi / Pei, Kai / Sun, Min / Wu, Huaping / Jiang, Shaofei	Multi-objective optimization of controllable configurations for bistable laminates using NSGA-Ⅱ	113764
Zhang, Jinghui / Zhao, Qingxin / Ullah, Salamat / Geng, Litao / Civalek, Ömer	A new analytical solution of vibration response of orthotropic composite plates with two adjacent edges rotationally-restrained and the others free	113882
Liguori, Francesco S. / Magisano, Domenico / Leonetti, Leonardo / Garcea, Giovanni	Nonlinear thermoelastic analysis of shell structures: solid-shell modelling and high-performing continuation method	113734
Wei, Qingsong / Yang, Dan / Gu, Bohong / Sun, Baozhong	Numerical and experimental investigation on 3D angle interlock woven fabric under ballistic impact	113778
Köllner, Anton	Predicting buckling-driven delamination propagation in composite laminates: An analytical modelling approach	113776
Zhang, Qianyu / Qin, Zhigang / Yan, Ruosi / Wei, Sainan / Zhang, Wei / Lu, Suling / Jia, Lixia	Processing technology and ballistic-resistant mechanism of shear thickening fluid/high-performance fiber-reinforced composites: A review	113806
Novak, Nejc / Al-Ketan, Oraib / Krstulović-Opara, Lovre / Rowshan, Reza / Abu Al-Rub, Rashid K. / Vesenjak, Matej / Ren, Zoran	Quasi-static and dynamic compressive behaviour of sheet TPMS cellular structures	113801
Sarfraz, Muhammad Salman / Hong, Hyunsoo / Kim, Seong Su	Recent developments in the manufacturing technologies of composite components and their cost-effectiveness in the automotive industry: A review study	113864
Todoroki, Akira / Oasada, Tatsuki / Ueda, Masahito / Matsuzaki, Ryosuke / Hirano, Yoshiyasu	Reinforcing in the lay-up direction with self-heating for carbon fiber composites fabricated using a fused filament fabrication 3D printer	113815
Sajid, Z. / Karuppanan, S. / Sallih, N. / Kee, K. E. / Shah, S. Z. H.	Role of washer size in mitigating adverse effects of bolt-hole clearance in a single-lap, single-bolt basalt composite joint	113802
Anilkumar, P. M. / Haldar, A. / Jansen, E. L. / Rao, B. N. / Rolfes, R.	Snap-through of bistable variable stiffness laminates using MFC actuators	113694
Choi, Won-Ho / Choe, Hyeon-Seok / Nam, Young-Woo	Space hypervelocity impact-shielding and microwave absorbing composite composed of cobalt-coated aramid fibers	113875
Kolasangiani, Kamal / Oguamanam, Donatus / Bougherara, Habiba	Strain-controlled fatigue life prediction of Flax-epoxy laminates using a progressive fatigue damage model	113797
McHale, Ciarán / Carey, Sean / Hadjiloizi, Demetra A. / Weaver, Paul M.	Thermal stresses in composite cylindrical lattices	113747
Chen, Wei / Wang, Lin / Yan, Zhi / Luo, Bo	Three-dimensional large-deformation model of hard-magnetic soft beams	113822
Behrou, Reza / Ghanem, Maroun Abi / Macnider, Brianna C. / Verma, Vimarsh / Alvey, Ryan / Hong, Jinho / Emery, Ashley F. / Kim, Hyunsun Alicia / Boechler, Nicholas	Topology optimization of nonlinear periodically microstructured materials for tailored homogenized constitutive properties	113729
Bellali, Mohammed Amine / Serier, Boualem / Mokhtari, Mohamed / Campilho, Raul D. S. G. / Lebon, Frédéric / Fekirini, Hamida	XFEM and CZM modeling to predict the repair damage by composite patch of aircraft structures: Debonding parameters	113805

Über diese
Datenseite
IssueID
58290
Veröffentlicht am:
17.04.2021
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - Juni 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Juni 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.