Composite Structures - v. 57, n. 1-4 (Juli 2002)

Erschienen:	Juli 2002

Autor(en)	Titel	Seite(n)
Mair, Robert Ian	Advanced composite structures research in Australia	3-10
Yap, Jeff W. H. / Scott, Murray L. / Thomson, Rodney S. / Hachenberg, Dieter	The analysis of skin-to-stiffener debonding in composite aerospace structures	425-435
Yang, Qing-Sheng / Qin, Qing-Hua / Zheng, Dai-Hua	Analytical and numerical investigation of interfacial stresses of FRP–concrete hybrid structure	221-226
Shin, Kum Cheol / Lee, Jung Ju / Kim, Ku Hyun / Song, Min Cheol / Huh, Jeung Soo	Axial crush and bending collapse of an aluminum/GFRP hybrid square tube and its energy absorption capability	279-287
Li, Jianchun / Samali, Bijan / Ye, Lin / Bakoss, Steve	Behaviour of concrete beam–column connections reinforced with hybrid FRP sheet	357-365
Jones, R. / Whittingham, B. / Marshall, I. H.	Bonded repairs to rib stiffened wing skins	453-458
Clifford, S. M. / Manger, C. I. C. / Clyne, T. W.	Characterisation of a glass-fibre reinforced vinylester to steel joint for use between a naval GRP superstructure and a steel hull	59-66
Kim, Jin Kook / Lee, Dai Gil	Characteristics of plasma surface treated composite adhesive joints at high environmental temperature	37-46
Shanmugam, D. K. / Chen, F. L. / Siores, E. / Brandt, M.	Comparative study of jetting machining technologies over laser machining technology for cutting composite materials	289-296
Krueger, Ronald / Paris, Isabelle L. / O'Brien, T. Kevin / Minguet, Pierre J.	Comparison of 2D finite element modeling assumptions with results from 3D analysis for composite skin-stiffener debonding	161-168
Jones, R. / Peng, D.	Composite repairs to cracked holes under bi-axial loading	459-464
Sup Lee, Chang / Lee, Dai Gil / Oh, Je Hoon / Kim, Hyun Surk	Composite wrist blocks for double arm type robots for handling large LCD glass panels	345-355
Ruan, D. / Lu, G. / Chen, F. L. / Siores, E.	Compressive behaviour of aluminium foams at low and medium strain rates	331-336
Tavares, C. M. L. / Ribeiro, M. C. S. / Ferreira, A. J. M. / Guedes, R. M.	Creep behaviour of FRP-reinforced polymer concrete	47-51
Su, Zhongqing / Ye, Lin / Bu, Xiongzhu	A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers	465-471
Kim, Jong Min / Lee, Dai Gil / Chang, Seung Hwan / Oh, Se Hoon / Jeon, Han Su	Design and experimental investigation of composite squirrel cage rotor with temperature effects	337-344
Kim, Hyoung Geun / Lee, Dai Gil	Dielectric cure monitoring for glass/polyester prepreg composites	91-99
Lee, L. / Rudov-Clark, S. / Mouritz, A. P. / Bannister, M. K. / Herszberg, I.	Effect of weaving damage on the tensile properties of three-dimensional woven composites	405-413
Chen, Zuorong / Yu, Shouwen / Meng, Lu / Lin, Ye	Effective properties of layered magneto-electro-elastic composites	177-182
Petermann, J. / Schulte, K.	The effects of creep and fatigue stress ratio on the long-term behaviour of angle-ply CFRP	205-210
Koh, Y. L. / Chiu, W. K. / Rajic, N.	Effects of local stiffness changes and delamination on Lamb wave transmission using surface-mounted piezoelectric transducers	437-443
El Kadi, H. / Al-Assaf, Y.	Energy-based fatigue life prediction of fiberglass/epoxy composites using modular neural networks	85-89
Li, R. / Kelly, D. / Crosky, A.	An evaluation of failure criteria for matrix induced failure in composite materials	385-391
O'Brien, T. Kevin / Paris, Isabelle L.	Exploratory investigation of failure mechanisms in transition regions between solid laminates and X-cor® truss sandwich	189-204
Seo, Dae-Cheol / Lee, Jung-Ju	Fatigue crack growth behavior of cracked aluminum plate repaired with composite patch	323-330
Cheuk, P. T. / Tong, L. / Wang, C. H. / Baker, A. / Chalkley, P.	Fatigue crack growth in adhesively bonded composite-metal double-lap joints	109-115
Lai, M. O. / Lu, L. / Chung, B. Y.	Formation of Mg–Al–Ti/MgO composite via reduction of TiO2	183-187
Moita, José M.Simões / Soares, Cristóvão M.Mota / Soares, Carlos A.Mota	Geometrically non-linear analysis of composite structures with integrated piezoelectric sensors and actuators	253-261
Sia, T. F. / Liu, X. L. / Chiu, W. K. / Paton, R.	Glass transition and viscoelastic behaviour of partially cured composites	489-493
Loughlan, J.	The influence of mechanical couplings on the compressive stability of anti-symmetric angle-ply laminates	473-482
Nai, S. M. L. / Gupta, M.	Influence of stirring speed on the synthesis of Al/SiC based functionally gradient materials	227-233
Yang, Jian / Ye, Jianqiao	Interfacial stresses in plated beams with cracks	125-134
Tan, Ping / Tong, Liyong	Investigation of loading assumptions on the effective electroelastic constants for PFRC materials	101-108
Chen, Nan / Gutierrez-Mora, F. / Koritala, R. E. / Goretta, K. C. / Routbort, J. L. / Pan, Jinsheng	Joining particulate and whisker ceramic composites by plastic flow	135-139
Magno, Massimo / Ganghoffer, Jean-François / Postle, Ron / Lallam, Aziz	A mesoscopic wave model for textile materials in large deformations	367-371
Ramos Loja, M. A. / Mota Soares, C. M. / Mota Soares, C. A.	Modelling and design of adaptive structures using B-spline strip models	245-251
Narita, Yoshihiro	Multi-objective design for vibration and buckling of laminated plates by statistical treatment	315-322
Wang, K. / Kelly, D. / Dutton, S.	Multi-objective optimisation of composite aerospace structures	141-148
Ohta, Yoshiki / Narita, Yoshihiro / Nagasaki, Kenta	On the damping analysis of FRP laminated composite plates	169-175
Bayandor, Javid / Scott, Murray L. / Thomson, Rodney S.	Parametric optimisation of composite shell structures for an aircraft Krueger flap	415-423
Chen, Haoran / Bai, Ruixiang	Postbuckling behavior of face/core debonded composite sandwich plate considering matrix crack and contact effect	305-313
Sweeting, R. / Liu, X. L. / Paton, R.	Prediction of processing-induced distortion of curved flanged composite laminates	79-84
Barlow, Darren / Howe, Chris / Clayton, Graham / Brouwer, Stephan	Preliminary study on cost optimisation of aircraft composite structures applicable to liquid moulding technologies	53-57
Alampalli, Sreenivas / Kunin, Jonathan	Rehabilitation and field testing of an FRP bridge deck on a truss bridge	373-375
Lee, Dai Gil / Chin, Woo Seok / Kwon, Jae Wook / Yoo, Ae Kwon	Repair of underground buried pipes with resin transfer molding	67-77
Sheng, H. Y. / Ye, J. Q.	A semi-analytical finite element for laminated composite plates	117-123
Turvey, G. J. / Brooks, R. J.	Semi-rigid––simply supported shear deformable pultruded GRP beams subjected to end moment loading: comparison of measured and predicted deflections	263-277
Li, R. / Kelly, D. / Crosky, A.	Strength improvement by fibre steering around a pin loaded hole	377-383
Hag-Elsafi, Osman / Lund, Ryan / Alampalli, Sreenivas	Strengthening of a bridge pier capbeam using bonded FRP composite plates	393-403
Her, Shiuh-Chuan	Stress analysis of ply drop-off in composite structures	235-244
Lemma, E. / Chen, L. / Siores, E. / Wang, J.	Study of cutting fiber-reinforced composites by using abrasive water-jet with cutting head oscillation	297-303
Wang, J. / Tong, L.	A study of the vibration of delaminated beams using a nonlinear anti-interpenetration constraint model	483-488
Kim, Po Jin / Lee, Dai Gil	Surface quality and shrinkage of the composite bus housing panel manufactured by RTM	211-220
Kotousov, A. / Wang, C. H.	Three-dimensional solutions for transversally isotropic composite plates	445-452
Bang, Kyung Geun / Lee, Dai Gil	Thrust bearing design for high-speed composite air spindles	149-160
Dawe, D. J.	Use of the finite strip method in predicting the behaviour of composite laminated structures	11-36

Autor(en)

Titel

Seite(n)

Mair, Robert Ian

Advanced composite structures research in Australia

3-10

Yap, Jeff W. H. / Scott, Murray L. / Thomson, Rodney S. / Hachenberg, Dieter

The analysis of skin-to-stiffener debonding in composite aerospace structures

425-435

Yang, Qing-Sheng / Qin, Qing-Hua / Zheng, Dai-Hua

Analytical and numerical investigation of interfacial stresses of FRP–concrete hybrid structure

221-226

Shin, Kum Cheol / Lee, Jung Ju / Kim, Ku Hyun / Song, Min Cheol / Huh, Jeung Soo

Axial crush and bending collapse of an aluminum/GFRP hybrid square tube and its energy absorption capability

279-287

Li, Jianchun / Samali, Bijan / Ye, Lin / Bakoss, Steve

Behaviour of concrete beam–column connections reinforced with hybrid FRP sheet

357-365

Jones, R. / Whittingham, B. / Marshall, I. H.

Bonded repairs to rib stiffened wing skins

453-458

Clifford, S. M. / Manger, C. I. C. / Clyne, T. W.

Characterisation of a glass-fibre reinforced vinylester to steel joint for use between a naval GRP superstructure and a steel hull

59-66

Kim, Jin Kook / Lee, Dai Gil

Characteristics of plasma surface treated composite adhesive joints at high environmental temperature

37-46

Shanmugam, D. K. / Chen, F. L. / Siores, E. / Brandt, M.

Comparative study of jetting machining technologies over laser machining technology for cutting composite materials

289-296

Krueger, Ronald / Paris, Isabelle L. / O'Brien, T. Kevin / Minguet, Pierre J.

Comparison of 2D finite element modeling assumptions with results from 3D analysis for composite skin-stiffener debonding

161-168

Jones, R. / Peng, D.

Composite repairs to cracked holes under bi-axial loading

459-464

Sup Lee, Chang / Lee, Dai Gil / Oh, Je Hoon / Kim, Hyun Surk

Composite wrist blocks for double arm type robots for handling large LCD glass panels

345-355

Ruan, D. / Lu, G. / Chen, F. L. / Siores, E.

Compressive behaviour of aluminium foams at low and medium strain rates

331-336

Tavares, C. M. L. / Ribeiro, M. C. S. / Ferreira, A. J. M. / Guedes, R. M.

Creep behaviour of FRP-reinforced polymer concrete

47-51

Su, Zhongqing / Ye, Lin / Bu, Xiongzhu

A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers

465-471

Kim, Jong Min / Lee, Dai Gil / Chang, Seung Hwan / Oh, Se Hoon / Jeon, Han Su

Design and experimental investigation of composite squirrel cage rotor with temperature effects

337-344

Kim, Hyoung Geun / Lee, Dai Gil

Dielectric cure monitoring for glass/polyester prepreg composites

91-99

Lee, L. / Rudov-Clark, S. / Mouritz, A. P. / Bannister, M. K. / Herszberg, I.

Effect of weaving damage on the tensile properties of three-dimensional woven composites

405-413

Chen, Zuorong / Yu, Shouwen / Meng, Lu / Lin, Ye

Effective properties of layered magneto-electro-elastic composites

177-182

Petermann, J. / Schulte, K.

The effects of creep and fatigue stress ratio on the long-term behaviour of angle-ply CFRP

205-210

Koh, Y. L. / Chiu, W. K. / Rajic, N.

Effects of local stiffness changes and delamination on Lamb wave transmission using surface-mounted piezoelectric transducers

437-443

El Kadi, H. / Al-Assaf, Y.

Energy-based fatigue life prediction of fiberglass/epoxy composites using modular neural networks

85-89

Li, R. / Kelly, D. / Crosky, A.

An evaluation of failure criteria for matrix induced failure in composite materials

385-391

O'Brien, T. Kevin / Paris, Isabelle L.

Exploratory investigation of failure mechanisms in transition regions between solid laminates and X-cor® truss sandwich

189-204

Seo, Dae-Cheol / Lee, Jung-Ju

Fatigue crack growth behavior of cracked aluminum plate repaired with composite patch

323-330

Cheuk, P. T. / Tong, L. / Wang, C. H. / Baker, A. / Chalkley, P.

Fatigue crack growth in adhesively bonded composite-metal double-lap joints

109-115

Lai, M. O. / Lu, L. / Chung, B. Y.

Formation of Mg–Al–Ti/MgO composite via reduction of TiO2

183-187

Moita, José M.Simões / Soares, Cristóvão M.Mota / Soares, Carlos A.Mota

Geometrically non-linear analysis of composite structures with integrated piezoelectric sensors and actuators

253-261

Sia, T. F. / Liu, X. L. / Chiu, W. K. / Paton, R.

Glass transition and viscoelastic behaviour of partially cured composites

489-493

Loughlan, J.

The influence of mechanical couplings on the compressive stability of anti-symmetric angle-ply laminates

473-482

Nai, S. M. L. / Gupta, M.

Influence of stirring speed on the synthesis of Al/SiC based functionally gradient materials

227-233

Yang, Jian / Ye, Jianqiao

Interfacial stresses in plated beams with cracks

125-134

Tan, Ping / Tong, Liyong

Investigation of loading assumptions on the effective electroelastic constants for PFRC materials

101-108

Chen, Nan / Gutierrez-Mora, F. / Koritala, R. E. / Goretta, K. C. / Routbort, J. L. / Pan, Jinsheng

Joining particulate and whisker ceramic composites by plastic flow

135-139

Magno, Massimo / Ganghoffer, Jean-François / Postle, Ron / Lallam, Aziz

A mesoscopic wave model for textile materials in large deformations

367-371

Ramos Loja, M. A. / Mota Soares, C. M. / Mota Soares, C. A.

Modelling and design of adaptive structures using B-spline strip models

245-251

Narita, Yoshihiro

Multi-objective design for vibration and buckling of laminated plates by statistical treatment

315-322

Wang, K. / Kelly, D. / Dutton, S.

Multi-objective optimisation of composite aerospace structures

141-148

Ohta, Yoshiki / Narita, Yoshihiro / Nagasaki, Kenta

On the damping analysis of FRP laminated composite plates

169-175

Bayandor, Javid / Scott, Murray L. / Thomson, Rodney S.

Parametric optimisation of composite shell structures for an aircraft Krueger flap

415-423

Chen, Haoran / Bai, Ruixiang

Postbuckling behavior of face/core debonded composite sandwich plate considering matrix crack and contact effect

305-313

Sweeting, R. / Liu, X. L. / Paton, R.

Prediction of processing-induced distortion of curved flanged composite laminates

79-84

Barlow, Darren / Howe, Chris / Clayton, Graham / Brouwer, Stephan

Preliminary study on cost optimisation of aircraft composite structures applicable to liquid moulding technologies

53-57

Alampalli, Sreenivas / Kunin, Jonathan

Rehabilitation and field testing of an FRP bridge deck on a truss bridge

373-375

Lee, Dai Gil / Chin, Woo Seok / Kwon, Jae Wook / Yoo, Ae Kwon

Repair of underground buried pipes with resin transfer molding

67-77

Sheng, H. Y. / Ye, J. Q.

A semi-analytical finite element for laminated composite plates

117-123

Turvey, G. J. / Brooks, R. J.

Semi-rigid––simply supported shear deformable pultruded GRP beams subjected to end moment loading: comparison of measured and predicted deflections

263-277

Li, R. / Kelly, D. / Crosky, A.

Strength improvement by fibre steering around a pin loaded hole

377-383

Hag-Elsafi, Osman / Lund, Ryan / Alampalli, Sreenivas

Strengthening of a bridge pier capbeam using bonded FRP composite plates

393-403

Her, Shiuh-Chuan

Stress analysis of ply drop-off in composite structures

235-244

Lemma, E. / Chen, L. / Siores, E. / Wang, J.

Study of cutting fiber-reinforced composites by using abrasive water-jet with cutting head oscillation

297-303

Wang, J. / Tong, L.

A study of the vibration of delaminated beams using a nonlinear anti-interpenetration constraint model

483-488

Kim, Po Jin / Lee, Dai Gil

Surface quality and shrinkage of the composite bus housing panel manufactured by RTM

211-220

Kotousov, A. / Wang, C. H.

Three-dimensional solutions for transversally isotropic composite plates

445-452

Bang, Kyung Geun / Lee, Dai Gil

Thrust bearing design for high-speed composite air spindles

149-160

Dawe, D. J.

Use of the finite strip method in predicting the behaviour of composite laminated structures

11-36

Anzeige

Composite Structures - v. 57, n. 1-4 (Juli 2002)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - v. 57, n. 1-4 (Juli 2002)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.