Composite Structures - v. 32, n. 1-4 (1995)

Erschienen:	1995

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Thompson, S. P. / Loughlan, J.	The active buckling control of some composite column strips using piezoceramic actuators	59-67
Schlecht, M. / Schulte, K. / Hyer, M. W.	Advanced calculation of the room-temperature shapes of thin unsymmetric composite laminates	627-633
Mamalis, A. G. / Manolakos, D. E. / Demosthenous, G. A. / Ioannidis, M. B.	Analytical and experimental approach to damage and residual strength of fibreglass composite automotive frame rails during manufacturing	325-330
Chaoufi, J. / Gamby, D. / Benicchio, D.	Asymptotic stress field in a cracked orthotropic strip	467-475
Gamble, Keith / Pilling, Martin / Wilson, Andrew	An automated finite element analysis of the initiation and growth of damage in carbonfibre composite materials	265-274
Ramakrishna, S. / Hamada, H. / Nishiwaki, M.	Bolted joints of pultruded sandwich composite laminates	227-235
Eiblmeier, J. / Loughlan, J.	The buckling response of carbon fibre composite panels with reinforced cut-outs	97-113
Graham, Derek	Composite pressure hulls for deep ocean submersibles	331-343
Ganapathy, S. / Tripathy, Biswajit / Rao, K. P.	Damage and its growth in laminated composite circular/rectangular plates undergoing large deformations	367-373
Morii, Tohru / Hamada, Hiroyuki / Desaeger, Muriel / Gotoh, Akihiko / Yokoyama, Atsushi / Verpoest, Ignaas / Maekawa, Zen-ichiro	Damage tolerance of glass mat/epoxy laminates hybridized with flexible resin under static and impact loading	133-139
Robb, M. D. / Arnold, W. S. / Marshall, I. H.	The damage tolerance of GRP laminates under biaxial prestress	141-149
Wisnom, Michael R. / Jones, M. I.	Delamination due to interaction between curvature induced interlaminar tension and stresses at terminating plies	615-620
Nakai, Asami / Fujita, Akihiro / Yokoyama, Atsushi / Hamada, Hiroyuki	Design methodology for a braided cylinder	501-509
Kim, Hyun Surk / Lee, Su Jeong / Lee, Dai Gil	Development of a strength model for the cocured stepped lap joints under tensile loading	593-600
Cheon, Seong Sik / Choi, Jin Ho / Lee, Dai Gil	Development of the composite bumper beam for passenger cars	491-499
Jeong, Kwang Seop / Lee, Dai Gil / Oh, Se Hoon	Development of the composite flexspline for a cycloid-type harmonic drive using net shape manufacturing method	557-565
Thuis, H. G. S. J. / de Vries, H. P. J.	The development of two tooling concepts for the production of composite sine-wave beams	511-517
Ghoneam, S. M.	Dynamic analysis of open cracked laminated composite beams	3-11
Gilat, R. / Aboudi, J.	Dynamic buckling of nonlinear resin matrix composite structures	81-88
Tsai, M. Y. / Morton, J.	The effect of a spew fillet on adhesive stress distributions in laminated composite single-lap joints	123-131
Seo, D. C. / Lee, J. J.	Effect of embedded optical fiber sensors on transverse crack spacing of smart composite structures	51-58
Pinfold, Martyn / Calvert, Geoff	The effect of material flow on the stress analysis of an SMC component	549-555
Galea, S. C. / Shah, L. P. / Sanderson, S.	The effect of multiple damage in composite structures: a theoretical investigation	383-390
Wisnom, Michael R.	The effect of transverse compressive stresses on tensile failure of glass fibre-epoxy	621-626
Cooper, C. / Turvey, G. J.	Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material	217-226
Kenny, J. M. / Marchetti, M.	Elasto-plastic behavior of thermoplastic composite laminates under cyclic loading	375-382
Ursenbach, D. O. / Vaziri, R. / Delfosse, D.	An engineering model for deformation of CFRP plates during penetration	197-202
Lee, Jung Ju	Evaluation and analysis of interlaminar fracture toughness of bead filled matrix hybrid composite materials using orthotropic fracture mechanics	477-489
Found, M. S. / Friend, M. J.	Evaluation of CFRP panels with scarf repair patches	115-122
Shonaike, Gabriel O. / Matsuo, T.	Fabrication and mechanical properties of glass fibre reinforced thermoplastic elastomer composite	445-451
Silva, A. / Travassos, J. / de Freitas, M. / Soares, C. M. M.	Failure prediction of composite T-beams subjected to lateral load on the web	601-607
Lifshitz, J. M. / Dayan, H.	Filament-wound pressure vessel with thick metal liner	313-323
Robinson, P. / Javidrad, F. / Hitchings, D.	Finite element modelling of delamination growth in the DCB and edge delaminated DCB specimens	275-285
Hashagen, F. / Schellekens, J. C. J. / de Borst, R. / Parisch, H.	Finite element procedure for modelling fibre metal laminates	255-264
Kam, T. Y. / Jan, T. B.	First-ply failure analysis of laminated composite plates based on the layerwise linear displacement theory	583-591
Wang, J. / Karihaloo, B. L.	Fracture mechanics and optimization — a useful tool for fibre-reinforced composite design	453-466
Bardell, N. S. / Dunsdon, J. M. / Langley, R. S.	Free vibration analysis of thin rectangular laminated plate assemblies using the h-p version of the finite element method	237-246
Ossadzow, Claire / Muller, Patrick / Touratier, Maurice	A general doubly curved laminate shell theory	299-312
Gibson, R. J. / Thomson, R. D.	The generation and effect of thermal transients in ceramic composites	435-444
Yigit, A. S. / Christoforou, A. P.	Impact dynamics of composite beams	187-195
Brooks, R. J. / Thrvey, G. J.	Lateral buckling of pultruded GRP I-section cantilevers	203-215
Tullini, Nerio / Savoia, Marco	Logarithmic stress singularities at clamped-free corners of a cantilever orthotropic beam under flexure	659-666
Kam, T. Y. / Lai, F. M.	Maximum stiffness design of laminated composite plates via a constrained global optimization approach	391-398
Al-Oraimi, S. K. / Seibi, A. C.	Mechanical characterisation and impact behaviour of concrete reinforced with natural fibres	165-171
Lee, D. C. / Lee, J. J. / Yun, S. J.	The mechanical characteristics of smart composite structures with embedded optical fiber sensors	39-50
Soares, C. M. Mota / Soares, C. A. Mota / Mateus, H. C.	A model for the optimum design of thin laminated plate-shell structures for static, dynamic and buckling behaviour	69-79
Larrodé, E. / Miravete, A. / Fernández, F. J.	A new concept of a bus structure made of composite materials by using continuous transversal frames	345-356
Nishiwaki, Tsuyoshi / Yokoyama, Atsushi / Maekawa, Zen-ichiro / Hamada, Hiroyuki	A new numerical modeling for laminated composites	641-647
Barboni, Renato / Carbonaro, Rolando / Gaudenzi, Paolo	On the use of a multilayer higher-order theory for the stress analysis around a circular hole of laminates under tension	649-658
Adali, S. / Richter, A. / Verijenko, V. E. / Summers, E. B.	Optimal design of hybrid laminates with discrete ply angles for maximum buckling load and minimum cost	409-415
Katayama, Tsutao / Yamamoto, Hidetake / Inoue, Nozomu	Optimum design of artificial joints considering initial fixation of prosthesis	427-433
Okumura, Toshihiko / Yokoyama, Atsushi / Nagai, Kanehiro / Maekawa, Zenichiro	Optimum design of weaving structure of 3-D woven fabric composites by using genetic algorithms	417-426
Feldman, Esther	Postbuckling analysis of laminated plates made of discontinuous metal matrix composites	89-96
Laananen, D. H. / Bolukbasi, A. O.	Prediction of energy absorption in composite stiffeners	173-186
Summerscales, J. / Griffin, P. R. / Grove, S. M. / Guild, F. J.	Quantitative microstructural examination of RTM fabrics designed for enhanced flow	519-529
Nishiwaki, Tsuyoshi / Yokoyama, Atsushi / Maekawa, Zen-ichiro / Hamada, Hiroyuki	A quasi-three-dimensional elastic wave propagation analysis for laminated composites	635-640
Nishiwaki, Tsuyoshi / Yokoyama, Atsushi / Maekawa, Zen-ichiro / Hamada, Hiroyuki / Mori, Sadaki	A quasi-three-dimensional lateral compressive analysis method for a composite cylinder	293-298
Loughlan, J. / Ata, M.	The restrained torsional response of open section carbon fibre composite beams	13-31
Hirai, Tsuneo	Roll forming of SMC and TMC, considering the resin-fibre interface	541-548
Found, M. S. / Howard, I. C.	Single and multiple impact behaviour of a CFRP laminate	159-163
Di, Shenglin / Rothert, Heinrich	A solution of laminated cylindrical shells using an unconstrained third-order theory	667-680
Abramovich, H. / Grunwald, A.	Stability of axially impacted composite plates	151-158
Higashino, Masanobu / Takemura, Ken-ichi / Fujii, Toru J.	Strength and damage accumulation of carbon fabric composites with a cross-linked NBR modified epoxy under static and cyclic loadings	357-366
Fangchun, Xiao / Bingyuan, Li	Study for critical values of collapsing pressure for orthotropic laminated casing	609-614
Aoyama, E. / Inoue, H. / Hirogaki, T. / Nobe, H. / Kitahara, Y. / Katayama, T.	Study on small diameter drilling in GFRP	567-573
Katayama, Tsutao / Omiya, Tomohide / Amano, Itaru / Tanaka, Tatsuya / Kuroda, Kouji	A study on the characteristics of glass fibre reinforced thermoplastics by transfer moulding	531-539
Kim, Young Goo / Jeong, Kwang Seop / Lee, Dai Gil / Oh, Park Kyoun	A study on the composite screw rotors for superchargers	575-581
Muc, A.	Transverse shear effects in shape optimization of thinwalled laminated composite structures	399-408
Van Vinckenroy, G. / de Wilde, W. P.	The use of Monte Carlo techniques in statistical finite element methods for the determination of the structural behaviour of composite materials structural components	247-253
Khatri, K. N. / Bardell, N. S.	The variation of the stiffness coefficients for laminated open conical shell panels	287-292
Hamada, Ahmed Abd El-Hamid	Vibration and damping analysis of beams with composite coats	33-38

Über diese
Datenseite
IssueID
38142
Veröffentlicht am:
25.10.2020
Geändert am:
25.10.2020

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - v. 32, n. 1-4 (1995)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - v. 32, n. 1-4 (1995)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.