Composite Structures - v. 94, n. 3 (Februar 2012)

Erschienen:	Februar 2012

Autor(en)	Titel	Seite(n)
Csuka, Bernát / Kollár, László P.	Analysis of FRP confined columns under eccentric loading	1106-1116
Vasiliev, V. V. / Barynin, V. A. / Razin, A. F.	Anisogrid composite lattice structures – Development and aerospace applications	1117-1127
Burns, L. A. / Mouritz, A. P. / Pook, D. / Feih, S.	Bio-inspired design of aerospace composite joints for improved damage tolerance	995-1004
Ovesy, H. R. / Fazilati, J.	Buckling and free vibration finite strip analysis of composite plates with cutout based on two different modeling approaches	1250-1258
Oterkus, Erkan / Madenci, Erdogan / Weckner, Olaf / Silling, Stewart / Bogert, Philip / Tessler, Alexander	Combined finite element and peridynamic analyses for predicting failure in a stiffened composite curved panel with a central slot	839-850
Kuhn, Eric / Valot, Emmanuel / Herve, Philippe	A comparison between thermosonics and thermography for delamination detection in polymer matrix laminates	1155-1164
Tarlochan, F. / Ramesh, S.	Composite sandwich structures with nested inserts for energy absorption application	904-916
Takeda, Shin-ichi / Aoki, Yuichiro / Nagao, Yosuke	Damage monitoring of CFRP stiffened panels under compressive load using FBG sensors	813-819
Won, Jong-Pil / Yoon, Yi-Na / Hong, Byung-Tak / Choi, Tei-Joon / Lee, Su-Jin	Durability characteristics of nano-GFRP composite reinforcing bars for concrete structures in moist and alkaline environments	1236-1242
Mendoza-Navarro, Luis-Ernesto / Diaz-Diaz, Alberto / Caron, Jean-François / Chataigner, Sylvain	Enhanced layerwise model for laminates with imperfect interfaces – Part 2: Experimental validation and failure prediction	1032-1037
Russo, S.	Experimental and finite element analysis of a very large pultruded FRP structure subjected to free vibration	1097-1105
Chishti, Maajid / Wang, Chun H. / Thomson, Rodney S. / Orifici, Adrian C.	Experimental investigation of damage progression and strength of countersunk composite joints	865-873
Lombardi, M. / Fino, P. / Malucelli, G. / Montanaro, L.	Exploring composites based on PPO blend as ablative thermal protection systems – Part I: The role of layered fillers	1067-1074
Fino, P. / Lombardi, M. / Antonini, A. / Malucelli, G. / Montanaro, L.	Exploring composites based on PPO blend as ablative thermal protection systems – Part II: The role of equiaxial fillers	1060-1066
Naderi, M. / Maligno, A. R.	Fatigue life prediction of carbon/epoxy laminates by stochastic numerical simulation	1052-1059
Fazilati, J. / Ovesy, H. R.	Finite strip dynamic instability analysis of perforated cylindrical shell panels	1259-1264
Kargarnovin, M. H. / Hashemi, M.	Free vibration analysis of multilayered composite cylinder consisting fibers with variable volume fraction	931-944
Behjat, B. / Khoshravan, M. R.	Geometrically nonlinear static and free vibration analysis of functionally graded piezoelectric plates	874-882
Mollón, V. / Bonhomme, J. / Argüelles, A. / Viña, J.	Influence of the crack plane asymmetry over GII results in carbon epoxy ENF specimens	1187-1191
Kim, M. K. / Elder, D. J. / Wang, C. H. / Feih, S.	Interaction of laminate damage and adhesive disbonding in composite scarf joints subjected to combined in-plane loading and impact	945-953
Vo, T. P. / Guan, Z. W. / Cantwell, W. J. / Schleyer, G. K.	Low-impulse blast behaviour of fibre-metal laminates	954-965
Schizas, C. / Stutz, S. / Botsis, J. / Coric, D.	Monitoring of non-homogeneous strains in composites with embedded wavelength multiplexed fiber Bragg gratings: A methodological study	987-994
Römelt, P. / Cunningham, P. R.	A multi-scale finite element approach for modelling damage progression in woven composite structures	977-986
Lee, D. S. / Morillo, C. / Bugeda, G. / Oller, S. / Oñate, E.	Multilayered composite structure design optimisation using distributed/parallel multi-objective evolutionary algorithms	1087-1096
Shokrieh, Mahmood M. / Mazloomi, Mohammad S.	A new analytical model for calculation of stiffness of three-dimensional four-directional braided composites	1005-1015
Zhang, W. / Hao, Y. X. / Yang, J.	Nonlinear dynamics of FGM circular cylindrical shell with clamped–clamped edges	1075-1086
Reddy, J. N. / Kim, Jinseok	A nonlinear modified couple stress-based third-order theory of functionally graded plates	1128-1143
Shen, Hui-Shen	Nonlinear vibration of shear deformable FGM cylindrical shells surrounded by an elastic medium	1144-1154
Fazelzadeh, S. A. / Ghavanloo, E.	Nonlocal anisotropic elastic shell model for vibrations of single-walled carbon nanotubes with arbitrary chirality	1016-1022
Lau, Saijod T. W. / Said, M. R. / Yaakob, Mohd Yuhazri	On the effect of geometrical designs and failure modes in composite axial crushing: A literature review	803-812
Kędziora, P. / Muc, A.	Optimal shapes of PZT actuators for laminated structures subjected to displacement or eigenfrequency constraints	1224-1235
Ovesy, H. R. / Taghizadeh, M. / Kharazi, M.	Post-buckling analysis of composite plates containing embedded delaminations with arbitrary shape by using higher order shear deformation theory	1243-1249
Smith, Bryan / Banerjee, Biswajit	Reliability of inserts in sandwich composite panels	820-829
Bailey, C. G. / Yaqub, M.	Seismic strengthening of shear critical post-heated circular concrete columns wrapped with FRP composite jackets	851-864
Carrera, E. / Miglioretti, F.	Selection of appropriate multilayered plate theories by using a genetic like algorithm	1175-1186
Sebastian, W. M. / Zhang, C.	Self-equilibrating moments in FRP-reinforced continuous structures	917-930
Schläpfer, B. / Kress, G.	A sensitivity-based parameterization concept for the automated design and placement of reinforcement doublers	896-903
Colombo, C. / Vergani, L. / Burman, M.	Static and fatigue characterisation of new basalt fibre reinforced composites	1165-1174
Lal, Achchhe / Singh, B. N. / Patel, Dipan	Stochastic nonlinear failure analysis of laminated composite plates under compressive transverse loading	1211-1223
Si-Larbi, Amir / Agbossou, Amen / Ferrier, Emmanuel / Michel, Laurent	Strengthening RC beams with composite fiber cement plate reinforced by prestressed FRP rods: Experimental and numerical analysis	830-838
Egan, B. / McCarthy, C. T. / McCarthy, M. A. / Frizzell, R. M.	Stress analysis of single-bolt, single-lap, countersunk composite joints with variable bolt-hole clearance	1038-1051
Matos, Bruno / Correia, João R. / Castro, Luís M. S. / França, Paulo	Structural response of hyperstatic concrete beams reinforced with GFRP bars: Effect of increasing concrete confinement	1200-1210
Diaz, J. / Fagiano, C. / Abdalla, M. M. / Gürdal, Z. / Hernandez, S.	A study of interlaminar stresses in variable stiffness plates	1192-1199
Falzon, B. G. / Faggiani, A.	The use of a genetic algorithm to improve the postbuckling strength of stiffened composite panels susceptible to secondary instabilities	883-895
Yifeng, Zhong / Lei, Chen / Yu, Wenbin	Variational asymptotic modeling of the multilayer functionally graded cylindrical shells	966-976
Yifeng, Zhong / Lei, Chen / Yu, Wenbin	Variational asymptotic modeling of the thermomechanical behavior of composite cylindrical shells	1023-1031

Autor(en)

Titel

Seite(n)

Csuka, Bernát / Kollár, László P.

Analysis of FRP confined columns under eccentric loading

1106-1116

Vasiliev, V. V. / Barynin, V. A. / Razin, A. F.

Anisogrid composite lattice structures – Development and aerospace applications

1117-1127

Burns, L. A. / Mouritz, A. P. / Pook, D. / Feih, S.

Bio-inspired design of aerospace composite joints for improved damage tolerance

995-1004

Ovesy, H. R. / Fazilati, J.

Buckling and free vibration finite strip analysis of composite plates with cutout based on two different modeling approaches

1250-1258

Oterkus, Erkan / Madenci, Erdogan / Weckner, Olaf / Silling, Stewart / Bogert, Philip / Tessler, Alexander

Combined finite element and peridynamic analyses for predicting failure in a stiffened composite curved panel with a central slot

839-850

Kuhn, Eric / Valot, Emmanuel / Herve, Philippe

A comparison between thermosonics and thermography for delamination detection in polymer matrix laminates

1155-1164

Tarlochan, F. / Ramesh, S.

Composite sandwich structures with nested inserts for energy absorption application

904-916

Takeda, Shin-ichi / Aoki, Yuichiro / Nagao, Yosuke

Damage monitoring of CFRP stiffened panels under compressive load using FBG sensors

813-819

Won, Jong-Pil / Yoon, Yi-Na / Hong, Byung-Tak / Choi, Tei-Joon / Lee, Su-Jin

Durability characteristics of nano-GFRP composite reinforcing bars for concrete structures in moist and alkaline environments

1236-1242

Mendoza-Navarro, Luis-Ernesto / Diaz-Diaz, Alberto / Caron, Jean-François / Chataigner, Sylvain

Enhanced layerwise model for laminates with imperfect interfaces – Part 2: Experimental validation and failure prediction

1032-1037

Russo, S.

Experimental and finite element analysis of a very large pultruded FRP structure subjected to free vibration

1097-1105

Chishti, Maajid / Wang, Chun H. / Thomson, Rodney S. / Orifici, Adrian C.

Experimental investigation of damage progression and strength of countersunk composite joints

865-873

Lombardi, M. / Fino, P. / Malucelli, G. / Montanaro, L.

Exploring composites based on PPO blend as ablative thermal protection systems – Part I: The role of layered fillers

1067-1074

Fino, P. / Lombardi, M. / Antonini, A. / Malucelli, G. / Montanaro, L.

Exploring composites based on PPO blend as ablative thermal protection systems – Part II: The role of equiaxial fillers

1060-1066

Naderi, M. / Maligno, A. R.

Fatigue life prediction of carbon/epoxy laminates by stochastic numerical simulation

1052-1059

Fazilati, J. / Ovesy, H. R.

Finite strip dynamic instability analysis of perforated cylindrical shell panels

1259-1264

Kargarnovin, M. H. / Hashemi, M.

Free vibration analysis of multilayered composite cylinder consisting fibers with variable volume fraction

931-944

Behjat, B. / Khoshravan, M. R.

Geometrically nonlinear static and free vibration analysis of functionally graded piezoelectric plates

874-882

Mollón, V. / Bonhomme, J. / Argüelles, A. / Viña, J.

Influence of the crack plane asymmetry over GII results in carbon epoxy ENF specimens

1187-1191

Kim, M. K. / Elder, D. J. / Wang, C. H. / Feih, S.

Interaction of laminate damage and adhesive disbonding in composite scarf joints subjected to combined in-plane loading and impact

945-953

Vo, T. P. / Guan, Z. W. / Cantwell, W. J. / Schleyer, G. K.

Low-impulse blast behaviour of fibre-metal laminates

954-965

Schizas, C. / Stutz, S. / Botsis, J. / Coric, D.

Monitoring of non-homogeneous strains in composites with embedded wavelength multiplexed fiber Bragg gratings: A methodological study

987-994

Römelt, P. / Cunningham, P. R.

A multi-scale finite element approach for modelling damage progression in woven composite structures

977-986

Lee, D. S. / Morillo, C. / Bugeda, G. / Oller, S. / Oñate, E.

Multilayered composite structure design optimisation using distributed/parallel multi-objective evolutionary algorithms

1087-1096

Shokrieh, Mahmood M. / Mazloomi, Mohammad S.

A new analytical model for calculation of stiffness of three-dimensional four-directional braided composites

1005-1015

Zhang, W. / Hao, Y. X. / Yang, J.

Nonlinear dynamics of FGM circular cylindrical shell with clamped–clamped edges

1075-1086

Reddy, J. N. / Kim, Jinseok

A nonlinear modified couple stress-based third-order theory of functionally graded plates

1128-1143

Shen, Hui-Shen

Nonlinear vibration of shear deformable FGM cylindrical shells surrounded by an elastic medium

1144-1154

Fazelzadeh, S. A. / Ghavanloo, E.

Nonlocal anisotropic elastic shell model for vibrations of single-walled carbon nanotubes with arbitrary chirality

1016-1022

Lau, Saijod T. W. / Said, M. R. / Yaakob, Mohd Yuhazri

On the effect of geometrical designs and failure modes in composite axial crushing: A literature review

803-812

Kędziora, P. / Muc, A.

Optimal shapes of PZT actuators for laminated structures subjected to displacement or eigenfrequency constraints

1224-1235

Ovesy, H. R. / Taghizadeh, M. / Kharazi, M.

Post-buckling analysis of composite plates containing embedded delaminations with arbitrary shape by using higher order shear deformation theory

1243-1249

Smith, Bryan / Banerjee, Biswajit

Reliability of inserts in sandwich composite panels

820-829

Bailey, C. G. / Yaqub, M.

Seismic strengthening of shear critical post-heated circular concrete columns wrapped with FRP composite jackets

851-864

Carrera, E. / Miglioretti, F.

Selection of appropriate multilayered plate theories by using a genetic like algorithm

1175-1186

Sebastian, W. M. / Zhang, C.

Self-equilibrating moments in FRP-reinforced continuous structures

917-930

Schläpfer, B. / Kress, G.

A sensitivity-based parameterization concept for the automated design and placement of reinforcement doublers

896-903

Colombo, C. / Vergani, L. / Burman, M.

Static and fatigue characterisation of new basalt fibre reinforced composites

1165-1174

Lal, Achchhe / Singh, B. N. / Patel, Dipan

Stochastic nonlinear failure analysis of laminated composite plates under compressive transverse loading

1211-1223

Si-Larbi, Amir / Agbossou, Amen / Ferrier, Emmanuel / Michel, Laurent

Strengthening RC beams with composite fiber cement plate reinforced by prestressed FRP rods: Experimental and numerical analysis

830-838

Egan, B. / McCarthy, C. T. / McCarthy, M. A. / Frizzell, R. M.

Stress analysis of single-bolt, single-lap, countersunk composite joints with variable bolt-hole clearance

1038-1051

Matos, Bruno / Correia, João R. / Castro, Luís M. S. / França, Paulo

Structural response of hyperstatic concrete beams reinforced with GFRP bars: Effect of increasing concrete confinement

1200-1210

Diaz, J. / Fagiano, C. / Abdalla, M. M. / Gürdal, Z. / Hernandez, S.

A study of interlaminar stresses in variable stiffness plates

1192-1199

Falzon, B. G. / Faggiani, A.

The use of a genetic algorithm to improve the postbuckling strength of stiffened composite panels susceptible to secondary instabilities

883-895

Yifeng, Zhong / Lei, Chen / Yu, Wenbin

Variational asymptotic modeling of the multilayer functionally graded cylindrical shells

966-976

Yifeng, Zhong / Lei, Chen / Yu, Wenbin

Variational asymptotic modeling of the thermomechanical behavior of composite cylindrical shells

1023-1031

Anzeige

Composite Structures - v. 94, n. 3 (Februar 2012)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - v. 94, n. 3 (Februar 2012)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.