Composite Structures - v. 94, n. 12 (Dezember 2012)

Erschienen:	Dezember 2012

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Rajagopal, Anurag / Hodges, Dewey H.	Analytical beam theory for the in-plane deformation of a composite strip with in-plane curvature	3793-3798
Sburlati, Roberta	Analytical elastic solutions for pressurized hollow cylinders with internal functionally graded coatings	3592-3600
Yifeng, Zhong / Lei, Chen / Yu, Wenbin / Liangliang, Zhang	Asymptotical construction of a fully coupled, Reissner–Mindlin model for piezoelectric and piezomagnetic laminates	3583-3591
Nilakantan, Gaurav / Gillespie, John W.	Ballistic impact modeling of woven fabrics considering yarn strength, friction, projectile impact location, and fabric boundary condition effects	3624-3634
Milazzo, A. / Orlando, C.	A beam finite element for magneto-electro-elastic multilayered composite structures	3710-3721
Sohel, K. M. A. / Liew, J. Y. Richard / Yan, J. B. / Zhang, M. H. / Chia, K. S.	Behavior of Steel–Concrete–Steel sandwich structures with lightweight cement composite and novel shear connectors	3500-3509
Hadjazi, K. / Sereir, Z. / Amziane, S.	Cohesive zone model for the prediction of interfacial shear stresses in a composite-plate RC beam with an intermediate flexural crack	3574-3582
Chen, J. F. / Morozov, E. V. / Shankar, K.	A combined elastoplastic damage model for progressive failure analysis of composite materials and structures	3478-3489
Lee, Dongyeon / Tippur, Hareesh / Bogert, Phillip	Dynamic fracture of graphite/epoxy composites stiffened by buffer strips: An experimental study	3538-3545
Almeida, A. / Donadon, M. V. / de Faria, A. R. / de Almeida, S. F. M.	The effect of piezoelectrically induced stress stiffening on the aeroelastic stability of curved composite panels	3601-3611
Pimenta, Soraia / Pinho, Silvestre T.	The effect of recycling on the mechanical response of carbon fibres and their composites	3669-3684
Ren, Baosheng / Mizue, Taro / Goda, Koichi / Noda, Junji	Effects of fluctuation of fibre orientation on tensile properties of flax sliver-reinforced green composites	3457-3464
Nguyen, Tien-Cuong / Bai, Yu / Zhao, Xiao-Ling / Al-Mahaidi, Riadh	Effects of ultraviolet radiation and associated elevated temperature on mechanical performance of steel/CFRP double strap joints	3563-3573
Kulikov, G. M. / Plotnikova, S. V.	Exact 3D stress analysis of laminated composite plates by sampling surfaces method	3654-3663
Grandidier, J.-C. / Casari, P. / Jochum, C.	A fibre direction compressive failure criterion for long fibre laminates at ply scale, including stacking sequence and laminate thickness effects	3799-3806
Kapoor, Hitesh / Kapania, R. K.	Geometrically nonlinear NURBS isogeometric finite element analysis of laminated composite plates	3434-3447
Cicala, G. / Recca, G. / Oliveri, L. / Perikleous, Y. / Scarpa, F. / Lira, C. / Lorato, A. / Grube, D. J. / Ziegmann, G.	Hexachiral truss-core with twisted hemp yarns: Out-of-plane shear properties	3556-3562
Zenkour, Ashraf M.	Hygrothermal effects on the bending of angle-ply composite plates using a sinusoidal theory	3685-3696
Reis, P. N. B. / Ferreira, J. A. M. / Santos, P. / Richardson, M. O. W. / Santos, J. B.	Impact response of Kevlar composites with filled epoxy matrix	3520-3528
Yeum, Chul Min / Sohn, Hoon / Ihn, Jeong Beom / Lim, Hyung Jin	Instantaneous delamination detection in a composite plate using a dual piezoelectric transducer network	3490-3499
Upadhyay, A. K. / Shukla, K. K.	Large deformation flexural behavior of laminated composite skew plates: An analytical approach	3722-3735
Chen, Hailong / Zheng, Qing / Zhao, Long / Zhang, Yu / Fan, Hualin	Mechanical property of lattice truss material in sandwich panel including strut flexural deformation	3448-3456
Daghia, F. / Ladevèze, P.	A micro–meso computational strategy for the prediction of the damage and failure of laminates	3644-3653
Bodaghi, M. / Damanpack, A. R. / Aghdam, M. M. / Shakeri, M.	Non-linear active control of FG beams in thermal environments subjected to blast loads with integrated FGP sensor/actuator layers	3612-3623
Reddy, J. N. / Berry, Jessica	Nonlinear theories of axisymmetric bending of functionally graded circular plates with modified couple stress	3664-3668
Amabili, Marco	Nonlinear vibrations of angle-ply laminated circular cylindrical shells: Skewed modes	3697-3709
Vallala, Venkat / Ruimi, Annie / Reddy, J. N.	Nonlinear viscoelastic analysis of orthotropic beams using a general third-order theory	3759-3768
Viola, Erasmo / Rossetti, Luigi / Fantuzzi, Nicholas	Numerical investigation of functionally graded cylindrical shells and panels using the generalized unconstrained third order theory coupled with the stress recovery	3736-3758
Remennikov, Alex M. / Kong, Sih Ying	Numerical simulation and validation of impact response of axially-restrained steel–concrete–steel sandwich panels	3546-3555
Schubert, Konstantin J. / Herrmann, Axel S.	On the influence of moisture absorption on Lamb wave propagation and measurements in viscoelastic CFRP using surface applied piezoelectric sensors	3635-3643
Caperan, Philippe / Poljansek, Martin / Gutiérrez, Eugenio / Primi, Stefano / Paulotto, Carlo	Optical 3-dimensional measurements on a FRP beam tested at serviceability limit	3465-3477
Kathiresan, M. / Manisekar, K. / Manikandan, V.	Performance analysis of fibre metal laminated thin conical frusta under axial compression	3510-3519
Boni, L. / Fanteria, D. / Lanciotti, A.	Post-buckling behaviour of flat stiffened composite panels: Experiments vs. analysis	3421-3433
Feo, Luciano / Marra, Gianfranco / Mosallam, Ayman S.	Stress analysis of multi-bolted joints for FRP pultruded composite structures	3769-3780
Yuan, Hong / Lu, Xusheng / Hui, David / Feo, Luciano	Studies on FRP-concrete interface with hardening and softening bond-slip law	3781-3792
Liu, Shutian / Hou, Yupin / Sun, Xiannian / Zhang, Yongcun	A two-step optimization scheme for maximum stiffness design of laminated plates based on lamination parameters	3529-3537

Über diese
Datenseite
IssueID
37894
Veröffentlicht am:
23.10.2020
Geändert am:
23.10.2020

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - v. 94, n. 12 (Dezember 2012)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - v. 94, n. 12 (Dezember 2012)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.