Composite Structures - Januar 2013

Erschienen:	Januar 2013

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Fazzolari, Fiorenzo A. / Carrera, Erasmo	Accurate free vibration analysis of thermo-mechanically pre/post-buckled anisotropic multilayered plates based on a refined hierarchical trigonometric Ritz formulation	381-402
Kulikov, G. M. / Plotnikova, S. V.	Advanced formulation for laminated composite shells: 3D stress analysis and rigid-body motions	236-246
Caminero, M. A. / Pavlopoulou, S. / Lopez-Pedrosa, M. / Nicolaisson, B. G. / Pinna, C. / Soutis, C.	Analysis of adhesively bonded repairs in composites: Damage detection and prognosis	500-517
Varas, D. / Artero-Guerrero, J. A. / Pernas-Sánchez, J. / López-Puente, J.	Analysis of high velocity impacts of steel cylinders on thin carbon/epoxy woven laminates	623-629
Seo, Soo-Yeon / Feo, Luciano / Hui, David	Bond strength of near surface-mounted FRP plate for retrofit of concrete structures	719-727
Ovesy, Hamid Reza / Ghannadpour, Sayyed Amir Mahdi / Zia-Dehkordi, Ehsan	Buckling analysis of moderately thick composite plates and plate structures using an exact finite strip	697-704
Lopatin, A. V. / Morozov, E. V.	Buckling of the composite orthotropic clamped–clamped cylindrical shell loaded by transverse inertia forces	471-478
Lim, Jun Woo / Lee, Dai Gil	Carbon composite hybrid bipolar plates with bypass-connected gas diffusion layers for PEM fuel cells	557-563
Fernández, Maria V. / de Moura, Marcelo F. S. F. / da Silva, Lucas F. M. / Marques, António T.	Characterization of composite bonded joints under pure mode II fatigue loading	222-226
Lee, Dongyoung / Yoon, Soon Ho / Kim, Ki Hyun / Choi, Ilbeom / Lee, Dai Gil	Composite anti-buckling structure for the corrugations of liquefied hydrogen containers	492-499
Kim, Eun-Ho / Rim, Mi-Sun / Lee, In / Hwang, Tae-Kyung	Composite damage model based on continuum damage mechanics and low velocity impact analysis of composite plates	123-134
Köpple, M. F. / Lauterbach, S. / Wagner, W.	Composite repair of through-wall defects in pipework – Analytical and numerical models with respect to ISO/TS 24817	173-178
Alcântara, I. / Teixeira-Dias, F. / Paulino, M.	Cork composites for the absorption of impact energy	16-27
Teter, Andrzej / Kolakowski, Zbigniew	Coupled dynamic buckling of thin-walled composite columns with open cross-sections	28-34
Yu, Young Ho / Kim, Bu Gi / Lee, Dai Gil	Cryogenic reliability of the sandwich insulation board for LNG ship	547-556
de-Carvalho, R. / Teixeira-Dias, F. / Varum, H.	Cyclic behaviour of a lightweight mortar with cork granulate composite	748-755
Saeedi, Navid / Sab, Karam / Caron, Jean-François	Cylindrical bending of multilayered plates with multi-delamination via a layerwise stress approach	728-739
Sebaey, T. A. / González, E. V. / Lopes, C. S. / Blanco, N. / Costa, J.	Damage resistance and damage tolerance of dispersed CFRP laminates: Design and optimization	569-576
Bhuiyan, Md. A. / Pucha, Raghuram V. / Worthy, Johnny / Karevan, Mehdi / Kalaitzidou, Kyriaki	Defining the lower and upper limit of the effective modulus of CNT/polypropylene composites through integration of modeling and experiments	80-87
Nilakantan, Gaurav / Wetzel, Eric D. / Bogetti, Travis A. / Gillespie, John W.	A deterministic finite element analysis of the effects of projectile characteristics on the impact response of fully clamped flexible woven fabrics	191-201
Castellazzi, G. / Krysl, P. / Bartoli, I.	A displacement-based finite element formulation for the analysis of laminated composite plates	518-527
Qu, Yegao / Hua, Hongxing / Meng, Guang	A domain decomposition approach for vibration analysis of isotropic and composite cylindrical shells with arbitrary boundaries	307-321
Gonilha, José A. / Correia, João R. / Branco, Fernando A.	Dynamic response under pedestrian load of a GFRP–SFRSCC hybrid footbridge prototype: Experimental tests and numerical simulation	453-463
Rahman, M. M. / Zainuddin, S. / Hosur, M. V. / Robertson, C. J. / Kumar, A. / Trovillion, J. / Jeelani, S.	Effect of NH2-MWCNTs on crosslink density of epoxy matrix and ILSS properties of e-glass/epoxy composites	213-221
Reis, J. M. L. / Carneiro, E. P.	Effect of piassava lees in the fracture behavior of polymer mortars	564-568
Wu, Yu-Fei / Jiang, Jia-Fei	Effective strain of FRP for confined circular concrete columns	479-491
Zhang, Aying / Lu, Haibao / Zhang, Dongxing	Effects of voids on residual tensile strength after impact of hygrothermal conditioned CFRP laminates	322-327
Senthil, K. / Arockiarajan, A. / Palaninathan, R. / Santhosh, B. / Usha, K. M.	Experimental and numerical studies on adhesively bonded CFRP laminates with closed debonds	598-606
Mazaheripour, H. / Barros, J. A. O. / Sena-Cruz, J. M. / Pepe, M. / Martinelli, E.	Experimental study on bond performance of GFRP bars in self-compacting steel fiber reinforced concrete	202-212
Oshkovr, S. A. / Taher, S. T. / Oshkour, A. A. / Ariffin, A. K. / Azhari, C. H.	Finite element modelling of axially crushed silk/epoxy composite square tubes	411-418
Abeysinghe, Chanaka M. / Thambiratnam, David P. / Perera, Nimal J.	Flexural performance of an innovative Hybrid Composite Floor Plate System comprising Glass–fibre Reinforced Cement, Polyurethane and steel laminate	179-190
Petrolo, M.	Flutter analysis of composite lifting surfaces by the 1D Carrera Unified Formulation and the doublet lattice method	539-546
Shadlou, S. / Alishahi, E. / Ayatollahi, M. R.	Fracture behavior of epoxy nanocomposites reinforced with different carbon nano-reinforcements	577-581
Kramer, Matthew R. / Liu, Zhanke / Young, Yin L.	Free vibration of cantilevered composite plates in air and in water	254-263
Malekzadeh, P. / Shojaee, M.	Free vibration of nanoplates based on a nonlocal two-variable refined plate theory	443-452
Viola, Erasmo / Tornabene, Francesco / Fantuzzi, Nicholas	General higher-order shear deformation theories for the free vibration analysis of completely doubly-curved laminated shells and panels	639-666
Yu, J. G. / Lefebvre, J. E.	Guided waves in multilayered hollow cylinders: The improved Legendre polynomial method	419-429
Koutsawa, Yao / Giunta, Gaetano / Belouettar, Salim	Hierarchical FEM modelling of piezo-electric beam structures	705-718
Lee, Chang-Yull / Kim, Ji-Hwan	Hygrothermal postbuckling behavior of functionally graded plates	278-282
Yoon, Soon Ho / Kim, Ki Hyun / Lee, Dai Gil	Improvement of the adhesive peel strength of the secondary barrier with level difference for LNG containment system	528-538
Stig, Fredrik / Hallström, Stefan	Influence of crimp on 3D-woven fibre reinforced composites	114-122
Totaro, G.	Local buckling modelling of isogrid and anisogrid lattice cylindrical shells with hexagonal cells	403-410
Lee, M. G. / Lee, K. W. / Hur, H. K. / Kang, K. J.	Mechanical behavior of a wire-woven metal under compression	264-277
Rafsanjani, Ahmad / Derome, Dominique / Carmeliet, Jan	Micromechanics investigation of hygro-elastic behavior of cellular materials with multi-layered cell walls	607-611
Laffan, M. J. / Pinho, S. T. / Robinson, P.	Mixed-mode translaminar fracture of CFRP: Failure analysis and fractography	135-141
Rouhi, M. / Rais-Rohani, M.	Modeling and probabilistic design optimization of a nanofiber-enhanced composite cylinder for buckling	346-353
Paggi, Marco / Corrado, Mauro / Rodriguez, Maria Alejandra	A multi-physics and multi-scale numerical approach to microcracking and power-loss in photovoltaic modules	630-638
Visrolia, A. / Meo, M.	Multiscale damage modelling of 3D weave composite by asymptotic homogenisation	105-113
Grover, Neeraj / Maiti, D. K. / Singh, B. N.	A new inverse hyperbolic shear deformation theory for static and buckling analysis of laminated composite and sandwich plates	667-675
Ritschel, Franziska / Brunner, Andreas J. / Niemz, Peter	Nondestructive evaluation of damage accumulation in tensile test specimens made from solid wood and layered wood materials	44-52
Dogan, Vedat	Nonlinear vibration of FGM plates under random excitation	366-374
Kapuria, S. / Nath, J. K.	On the accuracy of recent global–local theories for bending and vibration of laminated plates	163-172
Sahmani, S. / Ansari, R.	On the free vibration response of functionally graded higher-order shear deformable microplates based on the strain gradient elasticity theory	430-442
Rahimi, G. H. / Gazor, M. S. / Hemmatnezhad, M. / Toorani, H.	On the postbuckling and free vibrations of FG Timoshenko beams	247-253
Fazilati, J. / Ovesy, H. R.	Parametric instability of laminated longitudinally stiffened curved panels with cutout using higher order FSM	691-696
Ansari, R. / Shahabodini, A. / Rouhi, H.	Prediction of the biaxial buckling and vibration behavior of graphene via a nonlocal atomistic-based plate theory	88-94
Toutanji, H. / Ueno, S. / Vuddandam, R.	Prediction of the interfacial shear stress of externally bonded FRP to concrete substrate using critical stress state criterion	375-380
Vachon, Pierre-Luc / Brailovski, Vladimir / Terriault, Patrick	Prediction of the propagation of impact-induced delamination in carbon/epoxy laminates	227-235
Cárdenas, Diego / Elizalde, Hugo / Marzocca, Piergiovanni / Abdi, Frank / Minnetyan, Levon / Probst, Oliver	Progressive failure analysis of thin-walled composite structures	53-62
Ghoneim, H. / Noor, Sakif	Pumping potential of a hyperbolic shell-of-revolution flexible-matrix-composite structure	10-15
Li, Shi-Rong / Batra, Romesh C.	Relations between buckling loads of functionally graded Timoshenko and homogeneous Euler–Bernoulli beams	5-9
Guades, Ernesto / Aravinthan, Thiru	Residual properties of square FRP composite tubes subjected to repeated axial impact	354-365
Ha, Gee-Joo / Cho, Chang-Geun / Kang, Hyun-Wook / Feo, Luciano	Seismic improvement of RC beam–column joints using hexagonal CFRP bars combined with CFRP sheets	464-470
Meo, M. / Marulo, F. / Guida, M. / Russo, S.	Shape memory alloy hybrid composites for improved impact properties for aeronautical applications	756-766
Thai, Huu-Tai / Choi, Dong-Ho	Size-dependent functionally graded Kirchhoff and Mindlin plate models based on a modified couple stress theory	142-153
Alibeigloo, A.	Static analysis of functionally graded carbon nanotube-reinforced composite plate embedded in piezoelectric layers by using theory of elasticity	612-622
Şimşek, M. / Kocatürk, T. / Akbaş, Ş. D.	Static bending of a functionally graded microscale Timoshenko beam based on the modified couple stress theory	740-747
Karakoç, Alp / Freund, Jouni	A statistical failure initiation model for honeycomb materials	154-162
Kim, Taeseong / Lim, Jaehoon / Shin, SangJoon / Kim, Do-Hyung	Structural design optimization of a tiltrotor aircraft composite wing to enhance whirl flutter stability	283-294
Jibawy, A. / Desmorat, B. / Vincenti, A.	Structural rigidity optimization of thin laminated shells	35-43
Al-Safy, Rawaa / Al-Mahaidi, Riadh / Simon, George P.	A study of the use of high functionality-based resin for bonding between CFRP and concrete under harsh environmental conditions	295-306
Giunta, G. / Crisafulli, D. / Belouettar, S. / Carrera, E.	A thermo-mechanical analysis of functionally graded beams via hierarchical modelling	676-690
Catalanotti, G. / Camanho, P. P. / Marques, A. T.	Three-dimensional failure criteria for fiber-reinforced laminates	63-79
Andrianov, I. V. / Kalamkarov, A. L. / Starushenko, G. A.	Three-phase model for a fiber-reinforced composite material	95-104
Nikopour, H. / Selvadurai, A. P. S.	Torsion of a layered composite strip	1-4
Huang, Y. / Luo, Q.-Z. / Li, X.-F.	Transverse waves propagating in carbon nanotubes via a higher-order nonlocal beam model	328-336
Greco, Fabrizio / Leonetti, Lorenzo / Lonetti, Paolo	A two-scale failure analysis of composite materials in presence of fiber/matrix crack initiation and propagation	582-597
Markkula, Sam / Malecki, H. C. / Zupan, Marc	Uniaxial tension and compression characterization of hybrid CNS–glass fiber–epoxy composites	337-345

Über diese
Datenseite
IssueID
37893
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - Januar 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Januar 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.