Composite Structures - Juni 2013

Erschienen:	Juni 2013

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Li, Feng-Ming / Yao, Guo	1/3 Subharmonic resonance of a nonlinear composite laminated cylindrical shell in subsonic air flow	249-256
Groh, R. M. J. / Weaver, P. M. / White, S. / Raju, G. / Wu, Z.	A 2D equivalent single-layer formulation for the effect of transverse shear on laminated plates with curvilinear fibres	464-478
Damanpack, A. R. / Bodaghi, M. / Aghdam, M. M. / Shakeri, M.	Active control of geometrically non-linear transient response of sandwich beams with a flexible core using piezoelectric patches	517-531
Navarro, P. / Abrate, S. / Aubry, J. / Marguet, S. / Ferrero, J.-F.	Analytical modeling of indentation of composite sandwich beam	79-88
Boscolo, M.	Analytical solution for free vibration analysis of composite plates with layer-wise displacement assumptions	493-510
Emam, Samir A.	Approximate analytical solutions for the nonlinear free vibrations of composite beams in buckling	186-194
Kärger, Luise / Kling, Alexander	As-built FE simulation of advanced fibre placement structures based on manufacturing data	104-112
Petrone, G. / Rao, S. / De Rosa, S. / Mace, B. R. / Franco, F. / Bhattacharyya, D.	Behaviour of fibre-reinforced honeycomb core under low velocity impact loading	356-362
Ha, S. K. / Na, S. / Lee, H. K.	Bond characteristics of sprayed FRP composites bonded to concrete substrate considering various concrete surface conditions	270-279
Debski, Hubert / Kubiak, Tomasz / Teter, Andrzej	Buckling and postbuckling behaviour of thin-walled composite channel section column	195-204
Fraternali, Fernando / Spadea, Saverio / Ascione, Luigi	Buckling behavior of curved composite beams with different elastic response in tension and compression	280-289
Wang, Guoyan	Coupled free vibration of composite beams with asymmetric cross-sections	373-384
Ulke-Winter, Lars / Klaerner, Matthias / Kroll, Lothar	Determining the damping behavior of fiber reinforced composites	34-39
Leung, Cheequn K. / Melenka, Garrett W. / Nobes, David S. / Carey, Jason P.	The effect on elastic modulus of rigid-matrix tubular composite braid radius and braid angle change under tensile loading	135-143
Shamsuddoha, Md / Islam, Md Mainul / Aravinthan, Thiru / Manalo, Allan / Lau, Kin-tak	Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs	40-54
Hosseini-Toudeshky, Hossein / Sadighi, Mojtaba / Vojdani, Ali	Effects of curing thermal residual stresses on fatigue crack propagation of aluminum plates repaired by FML patches	154-162
Lin, Ting-Chun / Yang, Mei-Yi / Huang, Jong-Shin	Effects of solid distribution on the out-of-plane elastic properties of hexagonal honeycombs	436-442
Bartolozzi, Giorgio / Pierini, Marco / Orrenius, Ulf / Baldanzini, Niccolò	An equivalent material formulation for sinusoidal corrugated cores of structural sandwich panels	173-185
Fawzia, Sabrina	Evaluation of shear stress and slip relationship of composite lap joints	548-553
Pollayi, Hemaraju / Harursampath, Dineshkumar / Yu, Wenbin	Evaluation of strength of component-laminates in strip-based mechanisms	1-16
Hosseini-Hashemi, Shahrokh / Zare, Mojtaba / Nazemnezhad, Reza	An exact analytical approach for free vibration of Mindlin rectangular nano-plates via nonlocal elasticity	290-299
Wang, Peiyan / Lei, Yin / Yue, Zhufeng	Experimental and numerical evaluation of the flexural properties of stitched foam core sandwich structure	243-248
Hirose, Yasuo / Matsuda, Hirokazu / Matsubara, Go / Hojo, Masaki / Yoshida, Keishiro / Inamura, Fumihide	Experimental evaluation of splice-type crack arrester with a filler under mode-I type loading	300-306
Wang, J. / Potter, K. D. / Etches, J.	Experimental investigation and characterisation techniques of compressive fatigue failure of composites with fibre waviness at ply drops	398-403
Yu, B. / Kodur, V. K. R.	Factors governing the fire response of concrete beams reinforced with FRP rebars	257-269
Qin, Tianliang / Zhao, Libin / Zhang, Jianyu	Fastener effects on mechanical behaviors of double-lap composite joints	413-423
Garnier, Christian / Pastor, Marie-Laetitia / Lorrain, Bernard / Pantalé, Olivier	Fatigue behavior of impacted composite structures	443-450
Niknejad, Abbas / Assaee, Hassan / Elahi, Seyed Ali / Golriz, Ali	Flattening process of empty and polyurethane foam-filled E-glass/vinylester composite tubes – An experimental study	479-492
Jalalvand, Meisam / Hosseini-Toudeshky, Hossein / Mohammadi, Bijan	Homogenization of diffuse delamination in composite laminates	113-120
Vachon, Pierre-Luc / Brailovski, Vladimir / Terriault, Patrick	Impact-induced damage and damage propagation under flexural load in TiNi and Kevlar-stitched carbon/epoxy laminates	424-435
Nguyen, T. T. / Chan, T. M. / Mottram, J. T.	Influence of boundary conditions and geometric imperfections on lateral–torsional buckling resistance of a pultruded FRP I-beam by FEA	233-242
Morinière, F. D. / Alderliesten, R. C. / Sadighi, M. / Benedictus, R.	An integrated study on the low-velocity impact response of the GLARE fibre-metal laminate	89-103
Eckstein, E. / Pirrera, A. / Weaver, P. M.	Morphing high-temperature composite plates utilizing thermal gradients	363-372
Zhang, Da-Guang	Nonlinear bending analysis of FGM beams based on physical neutral surface and high order shear deformation theory	121-126
Duc, Nguyen Dinh / Cong, Pham Hong	Nonlinear postbuckling of symmetric S-FGM plates resting on elastic foundations using higher order shear deformation plate theory in thermal environments	566-574
Zhang, W. / Zhao, M. H. / Guo, X. Y.	Nonlinear responses of a symmetric cross-ply composite laminated cantilever rectangular plate under in-plane and moment excitations	554-565
Alaimo, A. / Milazzo, A. / Orlando, C.	Numerical analysis of a piezoelectric structural health monitoring system for composite flange-skin delamination detection	343-355
Hirose, Yasuo / Matsuda, Hirokazu / Matsubara, Go / Hojo, Masaki / Yoshida, Keishiro / Inamura, Fumihide	Numerical analysis of splice-type crack arrester with a filler under mode-I type loading	127-134
Lesani, M. / Bahaari, M. R. / Shokrieh, M. M.	Numerical investigation of FRP-strengthened tubular T-joints under axial compressive loads	71-78
Caccese, Vincent / Ferguson, James R. / Edgecomb, Michael A.	Optimal design of honeycomb material used to mitigate head impact	404-412
Abu Bakar, Ilyani Akmar / Kramer, Oliver / Bordas, S. / Rabczuk, Timon	Optimization of elastic properties and weaving patterns of woven composites	575-591
Mally, Timothy S. / Johnston, Allison L. / Chann, Molly / Walker, Roger H. / Keller, Michael W.	Performance of a carbon-fiber/epoxy composite for the underwater repair of pressure equipment	542-547
Van Tung, Hoang	Postbuckling behavior of functionally graded cylindrical panels with tangential edge constraints and resting on elastic foundations	532-541
Rouhi, M. / Rais-Rohani, M. / Najafi, A.	Probabilistic analysis and optimization of energy absorbing components made of nanofiber enhanced composite materials	144-153
Qiu, Ju / Sun, Qin	Rear fuselage stiffness design of T-tail	163-172
Zhang, Guoqi / Wang, Bing / Ma, Li / Xiong, Jian / Wu, Linzhi	Response of sandwich structures with pyramidal truss cores under the compression and impact loading	451-463
Wu, Chih-Ping / Li, Hao-Yuan	RMVT-based finite cylindrical prism methods for multilayered functionally graded circular hollow cylinders with various boundary conditions	592-608
Huang, C. S. / Hu, C. N.	Singularity analysis for a magneto–electro–elastic body of revolution	55-70
Ansari, R. / Gholami, R. / Faghih Shojaei, M. / Mohammadi, V. / Sahmani, S.	Size-dependent bending, buckling and free vibration of functionally graded Timoshenko microbeams based on the most general strain gradient theory	385-397
Amoushahi, Hossein / Azhari, Mojtaba	Static analysis and buckling of viscoelastic plates by a fully discretized nonlinear finite strip method using bubble functions	205-217
Shegokar, Niranjan L. / Lal, Achchhe	Stochastic nonlinear bending response of piezoelectric functionally graded beam subjected to thermoelectromechanical loadings with random material properties	17-33
Saeedi, Navid / Sab, Karam / Caron, Jean-François	Stress analysis of long multilayered plates subjected to invariant loading: Analytical solutions by a layerwise stress model	307-322
Lepore, E. / Chappoz, C. / Cipriano Monetta, D. / Pugno, N.	Surface roughness, claw size and leg elasticity influences on the jumping of Acheta domesticus crickets	609-616
Jiang, Lili / Zeng, Tao / Yan, Shi / Fang, Daining	Theoretical prediction on the mechanical properties of 3D braided composites using a helix geometry model	511-516
Prasanna Kumar, T. J. / Narendar, S. / Gopalakrishnan, S.	Thermal vibration analysis of monolayer graphene embedded in elastic medium based on nonlocal continuum mechanics	332-342
Ansari, R. / Shahabodini, A. / Rouhi, H.	A thickness-independent nonlocal shell model for describing the stability behavior of carbon nanotubes under compression	323-331
Hajianmaleki, Mehdi / Qatu, Mohamad S.	Vibrations of straight and curved composite beams: A review	218-232

Über diese
Datenseite
IssueID
37888
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - Juni 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Juni 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.