Composite Structures - September 2015

Erschienen:	September 2015

Autor(en)	Titel	Seite(n)
Rajabi, Majid / Ahmadian, Mohammad Taghi / Jamali, Jalil	Acoustic scattering from submerged laminated composite cylindrical shells	395-405
Zippo, Antonio / Ferrari, Giovanni / Amabili, Marco / Barbieri, Marco / Pellicano, Francesco	Active vibration control of a composite sandwich plate	100-114
Sharma, Anshul / Kumar, Rajeev / Vaish, Rahul / Chauhan, Vishal S.	Active vibration control of space antenna reflector over wide temperature range	291-304
Capozucca, R. / Bossoletti, S. / Montecchiani, S.	Assessment of RC beams with NSM CFRP rectangular rods damaged by notches	322-341
Li, Chenghu / Wu, Zhe	Buckling of 120° stiffened composite cylindrical shell under axial compression – Experiment and simulation	199-206
Baucke, André / Mittelstedt, Christian	Closed-form analysis of the buckling loads of composite laminates under uniaxial compressive load explicitly accounting for bending–twisting-coupling	437-454
Xu, Bin / Jiang, Jie Sheng / Xie, Yi Min	Concurrent design of composite macrostructure and multi-phase material microstructure for minimum dynamic compliance	221-233
Zhong, Suyang / Guo, Licheng / Liu, Gang / Lu, Huaiyu / Zeng, Tao	A continuum damage model for three-dimensional woven composites and finite element implementation	1-9
Band, U. N. / Desai, Y. M.	Coupled higher order and mixed layerwise finite element based static and free vibration analyses of laminated plates	406-414
Dong, H. / Wang, J.	A criterion for failure mode prediction of angle-ply composite laminates under in-plane tension	234-240
Hosoi, Atsushi / Yamaguchi, Yuhei / Ju, Yang / Sato, Yasumoto / Kitayama, Tsunaji	Detection and quantitative evaluation of defects in glass fiber reinforced plastic laminates by microwaves	134-144
Khashaba, U. A. / Aljinaidi, A. A. / Hamed, M. A.	Development of CFRE composite scarf adhesive joints with SiC and Al2O3 nanoparticle	415-427
Grace, Landon R.	The effect of moisture contamination on the relative permittivity of polymeric composite radar-protecting structures at X-band	305-312
Bai, Y. / Dong, C. Y. / Liu, Z. Y.	Effective elastic properties and stress states of doubly periodic array of inclusions with complex shapes by isogeometric boundary element method	54-69
Steenstra, W. / van der Meer, F. P. / Sluys, L. J.	An efficient approach to the modeling of compressive transverse cracking in composite laminates	115-121
Liu, Yilun / Wang, Lifeng	Enhanced stiffness, strength and energy absorption for co-continuous composites with liquid filler	274-283
Wan, Yumin / Wang, Youjiang / Gu, Bohong	Finite element prediction of the impact compressive properties of three-dimensional braided composites using multi-scale model	381-394
Lee, Dongyoung / Lim, Jun Woo / Nam, Soohyun / Choi, Ilbeom / Lee, Dai Gil	Gasket-integrated carbon/silicone elastomer composite bipolar plate for high-temperature PEMFC	284-290
Kurtaran, Hasan	Geometrically nonlinear transient analysis of thick deep composite curved beams with generalized differential quadrature method	241-250
Qazi, Samiullah / Michel, Laurent / Ferrier, Emmanuel	Impact of CFRP partial bonding on the behaviour of short reinforced concrete wall under monotonic lateral loading	251-259
Ha, S. K. / Khalid, Hammad R. / Park, S. M. / Lee, H. K.	Interfacial crack-induced debonding behavior of sprayed FRP laminate bonded to RC beams	176-187
Hayat, Khazar / Ha, Sung Kyu	Load mitigation of wind turbine blade by aeroelastic tailoring via unbalanced laminates composites	122-133
Henry, Todd C. / Bakis, Charles E. / Miller, Simon W. / Smith, Edward C.	Multi-objective optimal design of composite rotorcraft driveshaft including strain rate and temperature effects	42-53
Chang, Seongmin / Yang, Seunghwa / Shin, Hyunseong / Cho, Maenghyo	Multiscale homogenization model for thermoelastic behavior of epoxy-based composites with polydisperse SiC nanoparticles	342-353
Amabili, Marco	A new third-order shear deformation theory with non-linearities in shear for static and dynamic analysis of laminated doubly curved shells	260-273
Zhang, L. W. / Song, Z. G. / Liew, K. M.	Nonlinear bending analysis of FG-CNT reinforced composite thick plates resting on Pasternak foundations using the element-free IMLS-Ritz method	165-175
Xiao, Ying / Zhou, Hao-Miao / Cui, Xiao-Le	Nonlinear resonant magnetoelectric coupling effect with thermal, stress and magnetic loadings in laminated composites	35-41
Jin, Bo Cheng / Li, Xiaochen / Mier, Rodrigo / Pun, Adarsh / Joshi, Shiv / Nutt, Steven	Parametric modeling, higher order FEA and experimental investigation of hat-stiffened composite panels	207-220
Li, Xiaole / Gao, Weicheng / Liu, Wei	Post-buckling progressive damage of CFRP laminates with a large-sized elliptical cutout subjected to shear loading	313-321
Song, Yubao / Feng, Leping / Wen, Jihong / Yu, Dianlong / Wen, Xisen	Reduction of the sound transmission of a periodic sandwich plate using the stop band concept	428-436
Thai, Huu-Tai / Kim, Seung-Eock	A review of theories for the modeling and analysis of functionally graded plates and shells	70-86
Dong, Chensong / Kalantari, Mehdi / Davies, Ian J.	Robustness for unidirectional carbon/glass fibre reinforced hybrid epoxy composites under flexural loading	354-362
Trentin, Caterina / Casas, Joan R.	Safety factors for CFRP strengthening in bending of reinforced concrete bridges	188-198
Kappel, Erik	Spring-in of curved CFRP/foam-core sandwich structures	155-164
Sasikumar, P. / Suresh, R. / Gupta, Sayan	Stochastic model order reduction in uncertainty quantification of composite structures	21-34
Miotto, José Luiz / Dias, Antonio Alves	Structural efficiency of full-scale timber–concrete composite beams strengthened with fiberglass reinforced polymer	145-154
Qazi, Samiullah / Michel, Laurent / Ferrier, Emmanuel / Limam, Ali	Strut-and-tie model for a reinforced concrete wall strengthened with carbon fibre-reinforced polymers	87-99
Dinh, T. D. / Rezaei, A. / Puystiens, S. / Van Craenenbroeck, M. / Carbonez, K. / De Laet, L. / Mollaert, M. / Van Hemelrijck, D. / Van Paepegem, W.	A study of tension fabric membrane structures under in-plane loading: Nonlinear finite element analysis and validation	10-20
Ebrahimi, Farzad / Salari, Erfan	Thermal buckling and free vibration analysis of size dependent Timoshenko FG nanobeams in thermal environments	363-380

Autor(en)

Titel

Seite(n)

Rajabi, Majid / Ahmadian, Mohammad Taghi / Jamali, Jalil

Acoustic scattering from submerged laminated composite cylindrical shells

395-405

Zippo, Antonio / Ferrari, Giovanni / Amabili, Marco / Barbieri, Marco / Pellicano, Francesco

Active vibration control of a composite sandwich plate

100-114

Sharma, Anshul / Kumar, Rajeev / Vaish, Rahul / Chauhan, Vishal S.

Active vibration control of space antenna reflector over wide temperature range

291-304

Capozucca, R. / Bossoletti, S. / Montecchiani, S.

Assessment of RC beams with NSM CFRP rectangular rods damaged by notches

322-341

Li, Chenghu / Wu, Zhe

Buckling of 120° stiffened composite cylindrical shell under axial compression – Experiment and simulation

199-206

Baucke, André / Mittelstedt, Christian

Closed-form analysis of the buckling loads of composite laminates under uniaxial compressive load explicitly accounting for bending–twisting-coupling

437-454

Xu, Bin / Jiang, Jie Sheng / Xie, Yi Min

Concurrent design of composite macrostructure and multi-phase material microstructure for minimum dynamic compliance

221-233

Zhong, Suyang / Guo, Licheng / Liu, Gang / Lu, Huaiyu / Zeng, Tao

A continuum damage model for three-dimensional woven composites and finite element implementation

1-9

Band, U. N. / Desai, Y. M.

Coupled higher order and mixed layerwise finite element based static and free vibration analyses of laminated plates

406-414

Dong, H. / Wang, J.

A criterion for failure mode prediction of angle-ply composite laminates under in-plane tension

234-240

Hosoi, Atsushi / Yamaguchi, Yuhei / Ju, Yang / Sato, Yasumoto / Kitayama, Tsunaji

Detection and quantitative evaluation of defects in glass fiber reinforced plastic laminates by microwaves

134-144

Khashaba, U. A. / Aljinaidi, A. A. / Hamed, M. A.

Development of CFRE composite scarf adhesive joints with SiC and Al2O3 nanoparticle

415-427

Grace, Landon R.

The effect of moisture contamination on the relative permittivity of polymeric composite radar-protecting structures at X-band

305-312

Bai, Y. / Dong, C. Y. / Liu, Z. Y.

Effective elastic properties and stress states of doubly periodic array of inclusions with complex shapes by isogeometric boundary element method

54-69

Steenstra, W. / van der Meer, F. P. / Sluys, L. J.

An efficient approach to the modeling of compressive transverse cracking in composite laminates

115-121

Liu, Yilun / Wang, Lifeng

Enhanced stiffness, strength and energy absorption for co-continuous composites with liquid filler

274-283

Wan, Yumin / Wang, Youjiang / Gu, Bohong

Finite element prediction of the impact compressive properties of three-dimensional braided composites using multi-scale model

381-394

Lee, Dongyoung / Lim, Jun Woo / Nam, Soohyun / Choi, Ilbeom / Lee, Dai Gil

Gasket-integrated carbon/silicone elastomer composite bipolar plate for high-temperature PEMFC

284-290

Kurtaran, Hasan

Geometrically nonlinear transient analysis of thick deep composite curved beams with generalized differential quadrature method

241-250

Qazi, Samiullah / Michel, Laurent / Ferrier, Emmanuel

Impact of CFRP partial bonding on the behaviour of short reinforced concrete wall under monotonic lateral loading

251-259

Ha, S. K. / Khalid, Hammad R. / Park, S. M. / Lee, H. K.

Interfacial crack-induced debonding behavior of sprayed FRP laminate bonded to RC beams

176-187

Hayat, Khazar / Ha, Sung Kyu

Load mitigation of wind turbine blade by aeroelastic tailoring via unbalanced laminates composites

122-133

Henry, Todd C. / Bakis, Charles E. / Miller, Simon W. / Smith, Edward C.

Multi-objective optimal design of composite rotorcraft driveshaft including strain rate and temperature effects

42-53

Chang, Seongmin / Yang, Seunghwa / Shin, Hyunseong / Cho, Maenghyo

Multiscale homogenization model for thermoelastic behavior of epoxy-based composites with polydisperse SiC nanoparticles

342-353

Amabili, Marco

A new third-order shear deformation theory with non-linearities in shear for static and dynamic analysis of laminated doubly curved shells

260-273

Zhang, L. W. / Song, Z. G. / Liew, K. M.

Nonlinear bending analysis of FG-CNT reinforced composite thick plates resting on Pasternak foundations using the element-free IMLS-Ritz method

165-175

Xiao, Ying / Zhou, Hao-Miao / Cui, Xiao-Le

Nonlinear resonant magnetoelectric coupling effect with thermal, stress and magnetic loadings in laminated composites

35-41

Jin, Bo Cheng / Li, Xiaochen / Mier, Rodrigo / Pun, Adarsh / Joshi, Shiv / Nutt, Steven

Parametric modeling, higher order FEA and experimental investigation of hat-stiffened composite panels

207-220

Li, Xiaole / Gao, Weicheng / Liu, Wei

Post-buckling progressive damage of CFRP laminates with a large-sized elliptical cutout subjected to shear loading

313-321

Song, Yubao / Feng, Leping / Wen, Jihong / Yu, Dianlong / Wen, Xisen

Reduction of the sound transmission of a periodic sandwich plate using the stop band concept

428-436

Thai, Huu-Tai / Kim, Seung-Eock

A review of theories for the modeling and analysis of functionally graded plates and shells

70-86

Dong, Chensong / Kalantari, Mehdi / Davies, Ian J.

Robustness for unidirectional carbon/glass fibre reinforced hybrid epoxy composites under flexural loading

354-362

Trentin, Caterina / Casas, Joan R.

Safety factors for CFRP strengthening in bending of reinforced concrete bridges

188-198

Kappel, Erik

Spring-in of curved CFRP/foam-core sandwich structures

155-164

Sasikumar, P. / Suresh, R. / Gupta, Sayan

Stochastic model order reduction in uncertainty quantification of composite structures

21-34

Miotto, José Luiz / Dias, Antonio Alves

Structural efficiency of full-scale timber–concrete composite beams strengthened with fiberglass reinforced polymer

145-154

Qazi, Samiullah / Michel, Laurent / Ferrier, Emmanuel / Limam, Ali

Strut-and-tie model for a reinforced concrete wall strengthened with carbon fibre-reinforced polymers

87-99

Dinh, T. D. / Rezaei, A. / Puystiens, S. / Van Craenenbroeck, M. / Carbonez, K. / De Laet, L. / Mollaert, M. / Van Hemelrijck, D. / Van Paepegem, W.

A study of tension fabric membrane structures under in-plane loading: Nonlinear finite element analysis and validation

10-20

Ebrahimi, Farzad / Salari, Erfan

Thermal buckling and free vibration analysis of size dependent Timoshenko FG nanobeams in thermal environments

363-380

Anzeige

Composite Structures - September 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - September 2015

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.