Composite Structures - Januar 2017

Erschienen:	Januar 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Naderi, M. / Iyyer, N.	3D modeling of arbitrary cracking in solids using augmented finite element method	220-231
Pascual, Carlos / Montali, Jacopo / Overend, Mauro	Adhesively-bonded GFRP-glass sandwich components for structurally efficient glazing applications	560-573
Fiore, V. / Scalici, T. / Badagliacco, D. / Enea, D. / Alaimo, G. / Valenza, A.	Aging resistance of bio-epoxy jute-basalt hybrid composites as novel multilayer structures for cladding	1319-1328
Czechowski, Leszek	Analysis of dynamic response of functionally graded plate due to temperature pulse load	625-634
Tekieli, Marcin / De Santis, Stefano / de Felice, Gianmarco / Kwiecień, Arkadiusz / Roscini, Francesca	Application of Digital Image Correlation to composite reinforcements testing	670-688
Castro, Saullo G. P. / Donadon, Maurício V.	Assembly of semi-analytical models to address linear buckling and vibration of stiffened composite panels with debonding defect	232-247
Gul, Ufuk / Aydogdu, Metin / Gaygusuzoglu, Guler	Axial dynamics of a nanorod embedded in an elastic medium using doublet mechanics	1268-1278
Xu, Xiao-Jian / Wang, Xuan-Cang / Zheng, Mu-lian / Ma, Zheng	Bending and buckling of nonlocal strain gradient elastic beams	366-377
Liu, Wen / Feng, Peng / Huang, Jiankun	Bilinear softening model and double K fracture criterion for quasi-brittle fracture of pultruded FRP composites	1119-1125
Gamage, J. C. P. H. / Al-Mahaidi, Riadh / Wong, Bill / Ariyachandra, M. R. E. F.	Bond characteristics of CFRP-strengthened concrete members subjected to cyclic temperature and mechanical stress at low humidity	1051-1059
Lopatin, A. V. / Morozov, E. V. / Shatov, A. V.	Buckling of uniaxially compressed composite anisogrid lattice cylindrical panel with clamped edges	765-772
Blanc-Vannet, P.	Burst pressure reduction of various thermoset composite pressure vessels after impact on the cylindrical part	706-711
Orefice, Agostina / Mancusi, Geminiano / Feo, Luciano / Fraternali, Fernando	Cohesive interface behaviour and local shear strains in axially loaded composite annular tubes	1126-1135
Amiri-Rad, Ahmad / Mashayekhi, Mohammad / van der Meer, Frans P.	Cohesive zone and level set method for simulation of high cycle fatigue delamination in composite materials	61-69
Ma, Yan / Ueda, Masahito / Yokozeki, Tomohiro / Sugahara, Toshi / Yang, Yuqiu / Hamada, Hiroyuki	A comparative study of the mechanical properties and failure behavior of carbon fiber/epoxy and carbon fiber/polyamide 6 unidirectional composites	89-99
Dhaliwal, Gurpinder S. / Newaz, Golam M.	Compression after impact characteristics of carbon fiber reinforced aluminum laminates	1212-1224
Kim, Yail J. / Qian, Kenny Zongxi	Compressive behavior of non-slender hollow GFRP structural shapes in thermomechanical loading	813-823
Matsuzaki, Ryosuke / Yamamoto, Kentaro / Todoroki, Akira	Crack swarm inspection for estimation of crack location in carbon fiber reinforced plastics: A numerical study	36-42
Subbaramaiah, R. / Prusty, B. G. / Pearce, G. M. K. / Lim, S. H. / Thomson, R. S.	Crashworthy response of fibre metal laminate top hat structures	773-781
Tran, TrongNhan	Crushing analysis of multi-cell thin-walled rectangular and square tubes under lateral loading	734-747
Almeida, José Humberto S. / Ribeiro, Marcelo L. / Tita, Volnei / Amico, Sandro C.	Damage modeling for carbon fiber/epoxy filament wound composite tubes under radial compression	204-210
Tajeddini, Vahid / Muliana, Anastasia	Deformations of flexible and foldable electro-active composite structures	280-291
Lurie, S. A. / Solyaev, Yu. O. / Volkov-Bogorodskiy, D. B. / Bouznik, V. M. / Koshurina, A. A.	Design of the corrugated-core sandwich panel for the arctic rescue vehicle	1007-1019
Lee, Dongyoung / Choe, Jaeheon / Nam, Soohyun / Lim, Jun Woo / Choi, Ilbeom / Lee, Dai Gil	Development of non-woven carbon felt composite bipolar plates using the soft layer method	976-982
Civalek, Ömer	Discrete singular convolution method for the free vibration analysis of rotating shells with different material properties	267-279
Batuwitage, Chamila / Fawzia, Sabrina / Thambiratnam, David / Al-Mahaidi, Riadh	Durability of CFRP strengthened steel plate double-strap joints in accelerated corrosion environments	1287-1298
Cheng, Xiaoquan / Wang, Songwei / Zhang, Jie / Huang, Wenjun / Cheng, Yujia / Zhang, Jikui	Effect of damage on failure mode of multi-bolt composite joints using failure envelope method	8-15
Kar, Vishesh Ranjan / Mahapatra, Trupti Ranjan / Panda, Subrata Kumar	Effect of different temperature load on thermal postbuckling behaviour of functionally graded shallow curved shell panels	1236-1247
Kim, Sang-Woo	Effect of sensing distance of aluminum-coated FBG sensors installed on a composite plate under a low-velocity impact	248-255
Pasquali, Michele / Gaudenzi, Paolo	Effects of curvature on high-velocity impact resistance of thin woven fabric composite targets	349-365
Karamanli, Armagan	Elastostatic analysis of two-directional functionally graded beams using various beam theories and Symmetric Smoothed Particle Hydrodynamics method	653-669
Shi, Yu / Hallett, Stephen R. / Zhu, Meiling	Energy harvesting behaviour for aircraft composites structures using macro-fibre composite: Part I – Integration and experiment	1279-1286
Liu, Hui / Lv, Jun	An equivalent continuum multiscale formulation for 2D geometrical nonlinear analysis of lattice truss structure	335-348
Flore, D. / Stampfer, B. / Wegener, K.	Experimental and numerical failure analysis of notched quasi-unidirectional laminates at room temperature and elevated temperature	128-141
Li, Datao / Xia, Wei / Fang, Qinzhi / Yu, Wenshan / Shen, Shengping	Experimental and numerical investigations on the tensile behavior of 3D random fibrous materials at elevated temperature	292-299
Mesticou, Z. / Bui, L. / Junes, A. / Si Larbi, A.	Experimental investigation of tensile fatigue behaviour of Textile-Reinforced Concrete (TRC): Effect of fatigue load and strain rate	1136-1146
Chen, Xiao	Experimental investigation on structural collapse of a large composite wind turbine blade under combined bending and torsion	435-445
Joglekar, Shreyas / Von Hagel, Kayla / Pankow, Mark / Ferguson, Scott	Exploring how optimal composite design is influenced by model fidelity and multiple objectives	964-975
Ren, Mingfa / Cong, Jie / Wang, Bo / Guo, Xinglin	Extended multiscale finite element method for small-deflection analysis of thin composite plates with aperiodic microstructure characteristics	422-434
Sarvestani, Hamidreza Yazdani / Hojjati, Mehdi	Failure analysis of thick composite curved tubes	1027-1041
Aljabar, N. J. / Zhao, X. L. / Al-Mahaidi, R. / Ghafoori, E. / Motavalli, M. / Koay, Y. C.	Fatigue tests on UHM-CFRP strengthened steel plates with central inclined cracks under different damage levels	995-1006
Al-Anany, Yasser M. / Tait, Michael J.	Fiber reinforced elastomeric isolators for the seismic isolation of bridges	300-311
Sebaey, T. A. / Mahdi, E.	Filler strengthening of foam-filled energy absorption devices using CFRP beams	1-7
Jung, Ku-Hyun / Kim, Do-Hyoung / Kim, Hee-June / Park, Seong-Hyun / Jhang, Kyung-Young / Kim, Hak-Sung	Finite element analysis of a low-velocity impact test for glass fiber-reinforced polypropylene composites considering mixed-mode interlaminar fracture toughness	446-456
Pandey, Shashank / Pradyumna, S.	A finite element formulation for thermally induced vibrations of functionally graded material sandwich plates and shell panels	877-886
Hörold, A. / Schartel, B. / Trappe, V. / Korzen, M. / Bünker, J.	Fire stability of glass-fibre sandwich panels: The influence of core materials and flame retardants	1310-1318
Mastali, M. / Valente, I. B. / Barros, Joaquim A. O.	Flexural performance of innovative hybrid sandwich panels with special focus on the shear connection behavior	100-117
Razavi, Hamed / Babadi, Asghar Faramarzi / Beni, Yaghoub Tadi	Free vibration analysis of functionally graded piezoelectric cylindrical nanoshell based on consistent couple stress theory	1299-1309
Matadi Boumbimba, R. / Coulibaly, M. / Khabouchi, A. / Kinvi-Dossou, G. / Bonfoh, N. / Gérard, P.	Glass fibres reinforced acrylic thermoplastic resin-based tri-block copolymers composites: Low velocity impact response at various temperatures	939-951
Li, X. / Chen, J.	A highly efficient prediction of delamination migration in laminated composites using the extended cohesive damage model	712-721
Yin, Sha / Li, Jiani / Liu, Binghe / Meng, Kangpei / Huan, Yong / Nutt, Steven R. / Xu, Jun	Honeytubes: Hollow lattice truss reinforced honeycombs for crushing protection	1147-1154
Panduro, R. M. R. / Mantari, J. L.	Hygro-thermo-mechanical behavior of classical composites using a new trigonometrical shear strain shape function and a compact layerwise approach	378-391
Shin, Hye-Jin / Park, Jae-Yoon / Hong, Seung-Chan / Lee, Jung-Ryul	In situ non-destructive evaluation of an aircraft UHF antenna radome based on pulse-echo ultrasonic propagation imaging	16-22
Nguyen, Tan-Tien / Thang, Pham Toan / Lee, Jaehong	Lateral buckling analysis of thin-walled functionally graded open-section beams	952-963
Asadi, Amir / Miller, Mark / Singh, Arjun V. / Moon, Robert J. / Kalaitzidou, Kyriaki	Lightweight sheet molding compound (SMC) composites containing cellulose nanocrystals	211-219
Liu, Qiang / Ma, Jingbo / Xu, Xiyu / Wu, Yinghan / Li, Qing	Load bearing and failure characteristics of perforated square CFRP tubes under axial crushing	23-35
Choi, Ik Hyeon	Low-velocity impact response analysis of composite pressure vessel considering stiffness change due to cylinder stress	491-502
Sabido, Anthony / Bahamonde, Luis / Harik, Ramy / van Tooren, Michel J. L.	Maturity assessment of the laminate variable stiffness design process	804-812
Ahn, Hyunchul / Yu, Woong-Ryeol	Mechanical analysis of 3D braided and woven composites using fiber-based continuum analysis	1105-1118
Liew, K. M. / Kai, M. F. / Zhang, L. W.	Mechanical and damping properties of CNT-reinforced cementitious composites	81-88
Zhang, Kaipeng / Shi, Dongyan / Wang, Wei / Wang, Qingshan	Mechanical characterization of hybrid lattice-to-steel joint with pyramidal CFRP truss for marine application	1198-1204
Harhash, Mohamed / Carradò, Adele / Palkowski, Heinz	Mechanical properties and forming behaviour of laminated steel/polymer sandwich systems with local inlays – Part 2: Stretching and deep drawing	1084-1094
Billon, Kévin / Zampetakis, Ioannis / Scarpa, Fabrizio / Ouisse, Morvan / Sadoulet-Reboul, Emeline / Collet, Manuel / Perriman, Adam / Hetherington, Alistair	Mechanics and band gaps in hierarchical auxetic rectangular perforated composite metamaterials	1042-1050
Boufaida, Zakariya / Boisse, Julien / André, Stéphane / Farge, Laurent	Mesoscopic strain field analysis in a woven composite using a spectral solver and 3D-DIC measurements	604-612
Nazarenko, Lidiia / Stolarski, Henryk / Altenbach, Holm	A model of cylindrical inhomogeneity with spring layer interphase and its application to analysis of short-fiber composites	635-652
Joglekar, Shreyas / Pankow, Mark	Modeling of 3D woven composites using the digital element approach for accurate prediction of kinking under compressive loads	547-559
Nciri, M. / Notta-Cuvier, D. / Lauro, F. / Chaari, F. / Maalej, Y. / Zouari, B.	' Modelling and characterisation of dynamic behaviour of short-fibre-reinforced composites	516-528
An, Ji Su / Kwon, Seung Hyuk / Choi, Hyoung Jin / Jung, Jae Heum / Kim, Young Gil	Modified silane-coated carbonyl iron/natural rubber composite elastomer and its magnetorheological performance	1020-1026
Huang, Qun / Yang, Jie / Huang, Wei / Liu, Yin / Hu, Heng / Giunta, Gaetano / Belouettar, Salim	A new Fourier-related double scale analysis for wrinkling analysis of thin films on compliant substrates	613-624
Shi, Danghe / Xiao, Xinran	A new shell-beam element modeling method and its use in crash simulation of triaxial braided composites	792-803
Schladitz, Katja / Büter, Andreas / Godehardt, Michael / Wirjadi, Oliver / Fleckenstein, Johanna / Gerster, Tobias / Hassler, Ulf / Jaschek, Katrin / Maisl, Michael / Maisl, Ute / Mohr, Stefan / Netzelmann, Udo / Potyra, Tobias / Steinhauser, Martin O.	Non-destructive characterization of fiber orientation in reinforced SMC as input for simulation based design	195-203
Fu, Ming-Hui / Chen, Yu / Hu, Ling-Ling	A novel auxetic honeycomb with enhanced in-plane stiffness and buckling strength	574-585
Kiyono, C. Y. / Silva, E. C. N. / Reddy, J. N.	A novel fiber optimization method based on normal distribution function with continuously varying fiber path	503-515
Dimitri, Rossana / Fantuzzi, Nicholas / Li, Yong / Tornabene, Francesco	Numerical computation of the crack development and SIF in composite materials with XFEM and SFEM	468-490
Wang, Hailou / Sun, Baozhong / Gu, Bohong	Numerical modeling on compressive behaviors of 3-D braided composites under high temperatures at microstructure level	925-938
Huynh, Thao An / Lieu, Xuan Qui / Lee, Jaehong	NURBS-based modeling of bidirectional functionally graded Timoshenko beams for free vibration problem	1178-1190
York, C. B.	On Bending-Twisting coupled laminates	887-900
Karimi, Majid / Montazeri, Abbas / Ghajar, Rahmatollah	On the elasto-plastic behavior of CNT-polymer nanocomposites	782-791
Zhang, L. W.	On the study of the effect of in-plane forces on the frequency parameters of CNT-reinforced composite skew plates	824-837
Tsiatas, George C. / Charalampakis, Aristotelis E.	Optimizing the natural frequencies of axially functionally graded beams and arches	256-266
Al-Saadi, Nihad Tareq Khshain / Mohammed, Alyaa / Al-Mahaidi, Riadh	Performance of RC beams rehabilitated with NSM CFRP strips using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxide	392-407
Hu, Y. L. / Madenci, E.	Peridynamics for fatigue life and residual strength prediction of composite laminates	169-184
Zhao, Rui / Yu, Kaiping / Hulbert, Gregory M. / Wu, Ying / Li, Xiangyang	Piecewise shear deformation theory and finite element formulation for vibration analysis of laminated composite and sandwich plates in thermal environments	1060-1083
Jang, Jinhyeok / Sung, Minchang / Han, Sungjin / Yu, Woong-Ryeol	Prediction of delamination of steel-polymer composites using cohesive zone model and peeling tests	118-127
Carpinteri, Andrea / Fernández-Canteli, Alfonso / Fortese, Giovanni / Muniz-Calvente, Miguel / Ronchei, Camilla / Scorza, Daniela / Vantadori, Sabrina	Probabilistic failure assessment of Fibreglass composites	1163-1170
Chung, S. W. / Hong, S. G.	Pseudo-membrane shell theory of hybrid anisotropic materials	586-593
Fan, Haifeng / Vassilopoulos, Anastasios P. / Keller, Thomas	Pull-out behavior of CFRP ground anchors with two-strap ends	1258-1267
Kam, T. Y. / Su, H. M. / Huang, C. Y.	' Quasi-static buckling and first-ply failure loads of shear web reinforced glass-fabric composite wind blades	1225-1235
Parghi, Anant / Shahria Alam, M.	Seismic collapse assessment of non-seismically designed circular RC bridge piers retrofitted with FRP composites	901-916
Kwon, Minho / Seo, Hyunsu / Kim, Jinsup	Seismic performance of RC-frame structures with GFRP infill panels	722-733
Pandya, Kedar S. / Kulkarni, Mandar D. / Warman, Anirudh / Naik, N. K.	Simulation of stress wave attenuation in plain weave fabric composites during in-plane ballistic impact	748-757
Simsek, Mesut / Aydın, Mustafa	Size-dependent forced vibration of an imperfect functionally graded (FG) microplate with porosities subjected to a moving load using the modified couple stress theory	408-421
Fang, Xue-Qian / Zhu, Chang-Song	Size-dependent nonlinear vibration of nonhomogeneous shell embedded with a piezoelectric layer based on surface/interface theory	1191-1197
Xing, Y. F. / Gao, Y. H. / Chen, L. / Li, M.	Solution methods for two key problems in multiscale asymptotic expansion method	854-866
Pydah, Anup / Sabale, Aditya	Static analysis of bi-directional functionally graded curved beams	867-876
Thurnherr, C. / Ruppen, L. / Brändli, S. / Franceschi, C. M. / Kress, G. / Ermanni, P.	Stiffness analysis of corrugated laminates under large deformation	457-467
Li, Junfeng / Zu, Lei / Zhong, Guoliang / He, Mingchang / Yin, Haibin / Tan, Yuegang	Stiffness characteristics of soft finger with embedded SMA fibers	758-764
Wagner, H. N. R. / Hühne, C. / Rohwer, K. / Niemann, S. / Wiedemann, M.	Stimulating the realistic worst case buckling scenario of axially compressed unstiffened cylindrical composite shells	1095-1104
Naskar, S. / Mukhopadhyay, T. / Sriramula, S. / Adhikari, S.	Stochastic natural frequency analysis of damaged thin-walled laminated composite beams with uncertainty in micromechanical properties	312-334
Chakraborty, Debaleena / Chakraborty, D. / Murthy, K. S. R. K.	A strain gage technique for the determination of mixed mode stress intensity factors of orthotropic materials	185-194
Ascione, F. / Lamberti, M. / Razaqpur, A. G. / Spadea, S.	Strength and stiffness of adhesively bonded GFRP beam-column moment resisting connections	1248-1257
Al-Mosawe, Alaa / Kalfat, Robin / Al-Mahaidi, Riadh	Strength of Cfrp-steel double strap joints under impact loads using genetic programming	1205-1211
Espadas-Escalante, J. J. / van Dijk, N. P. / Isaksson, P.	A study on the influence of boundary conditions in computational homogenization of periodic structures with application to woven composites	529-537
Wang, Guannan / Tu, Wenqiong / Pindera, Marek-Jerzy	Tailoring the moduli of composites using hollow reinforcement	838-853
Niemann, S. / Wagner, R. / Beerhorst, M. / Hühne, C.	Testing and analysis of Anisogrid Prepreg element specimens under uniaxial tension and compression	594-603
Swaminathan, K. / Sangeetha, D. M.	Thermal analysis of FGM plates – A critical review of various modeling techniques and solution methods	43-60
Kravchenko, Oleksandr G. / Kravchenko, Sergii G. / Sun, Chin-Teh	Thickness dependence of mode I interlaminar fracture toughness in a carbon fiber thermosetting composite	538-546
Nam, Young-Woo / Choi, Jae-Hun / Lee, Won-Jun / Kim, Chun-Gon	Thin and lightweight radar-absorbing structure containing glass fabric coated with silver by sputtering	1171-1177
Mujtaba, A. / Stelzer, S. / Brunner, A. J. / Jones, R.	Thoughts on the scatter seen in cyclic Mode I fatigue delamination growth in DCB tests	1329-1338
Mzali, Slah / Mkaddem, Ali / Elwasli, Fatma / Mezlini, Salah	Towards an advanced modeling of failure mechanisms’ interaction in fiber-reinforced polyester: A mixed-mode loading concept	70-80
Ren, Mingfa / Chang, Xin / Xu, H. Y. / Li, Tong	Trans-scale analysis of composite overwrapped pressure vessel at cryogenic temperature	1339-1347
Nguyen, Trung-Kien / Nguyen, Ngoc-Duong / Vo, Thuc P. / Thai, Huu-Tai	Trigonometric-series solution for analysis of laminated composite beams	142-151
Zhang, L. W. / Selim, B. A.	Vibration analysis of CNT-reinforced thick laminated composite plates based on Reddy’s higher-order shear deformation theory	689-705
Deng, Hao / Chen, kaidong / Cheng, Wei / Zhao, ShouGen	Vibration and buckling analysis of double-functionally graded Timoshenko beam system on Winkler-Pasternak elastic foundation	152-168
Akpoyomare, A. I. / Okereke, M. I. / Bingley, M. S.	Virtual testing of composites: Imposing periodic boundary conditions on general finite element meshes	983-994
Wang, Ying / Burnett, Timothy L. / Chai, Yuan / Soutis, Costas / Hogg, Paul J. / Withers, Philip J.	X-ray computed tomography study of kink bands in unidirectional composites	917-924
Zhao, Libin / Wang, Yana / Zhang, Jianyu / Gong, Yu / Hu, Ning / Li, Ning	XFEM-based model for simulating zigzag delamination growth in laminated composites under mode I loading	1155-1162

Über diese
Datenseite
IssueID
37828
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - Januar 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Januar 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.