Composite Structures - Mai 2017

Erschienen:	Mai 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Costa, D. M. S. / Loja, M. A. R.	Bat-inspired optimization of multilayered adaptive structures	189-215
Van Do, Vuong Nguyen / Lee, Chin-Hyung	Bending analyses of FG-CNTRC plates using the modified mesh-free radial point interpolation method based on the higher-order shear deformation theory	485-497
Zhou, Yingwu / Chen, Xilong / Fan, Zhiheng / Sui, Lili / Li, Dawang / Xing, Feng	Bond behaviors of FRP-to-concrete interface under the control of a novel end-anchorage system	130-142
Liang, Ke / Sun, Qin	Buckling and post-buckling analysis of the delaminated composite plates using the Koiter–Newton method	266-276
Kabir, Mohammad-Zaman / Tavousi Tehrani, Behrang	Closed-form solution for thermal, mechanical, and thermo-mechanical buckling and post-buckling of SMA composite plates	535-548
Lee, Min-sik / Seo, Hyung-yoon / Kang, Chung-gil	Comparison of collision test results for center-pillar reinforcements with TWB and CR420/CFRP hybrid composite materials using experimental and theoretical methods	698-709
Jafarinezhad, M. R. / Eslami, M. R.	Coupled thermoelasticity of FGM annular plate under lateral thermal shock	758-771
Yang, Zhi-Bo / Radzieński, Maciej / Kudela, Pawel / Ostachowicz, Wieslaw	Damage detection in beam-like composite structures via Chebyshev pseudo spectral modal curvature	1-12
Ning, Haibin / Pillay, Selvum / Thattaiparthasarathy, K. Balaji / Vaidya, Uday K.	Design and manufacturing of long fiber thermoplastic composite helmet insert	792-797
Micheal, Amany G. B. / Bahei-El-Din, Yehia A.	Detecting laminate damage using embedded electrically active plies – An analytical approach	772-779
Riccio, A. / Russo, A. / Sellitto, A. / Raimondo, A.	Development and application of a numerical procedure for the simulation of the "Fibre Bridging" phenomenon in composite structures	104-119
Borazjani, Soroosh / Belingardi, Giovanni	Development of an innovative design of a composite-sandwich based vehicle roof structure	522-534
Zhang, Dahai / Fei, Qingguo / Zhang, Peiwei	Drop-weight impact behavior of honeycomb sandwich panels under a spherical impactor	633-645
Jiang, Cheng / Wu, Yu-Fei / Jiang, Jia-Fei	Effect of aggregate size on stress-strain behavior of concrete confined by fiber composites	851-862
Ferdous, Wahid / Manalo, Allan / Aravinthan, Thiru	Effect of beam orientation on the static behaviour of phenolic core sandwich composites with different shear span-to-depth ratios	292-304
Juhász, Zoltán / Szekrényes, András	The effect of delamination on the critical buckling force of composite plates: Experiment and simulation	456-464
Santos, R. A. M. / Reis, P. N. B. / Santos, M. J. / Coelho, C. A. C. P.	Effect of distance between impact point and hole position on the impact fatigue strength of composite laminates	33-39
Sarlin, Essi / Sironen, Reija / Pärnänen, Tuomas / Lindgren, Mari / Kanerva, Mikko / Vuorinen, Jyrki	The effect of matrix type on ageing of thick vinyl ester glass-fibre-reinforced laminates	840-850
Almansour, F. A. / Dhakal, H. N. / Zhang, Z. Y.	Effect of water absorption on Mode I interlaminar fracture toughness of flax/basalt reinforced vinyl ester hybrid composites	813-825
de Souza, L. R. / Marques, A. T. / d'Almeida, J. R. M.	Effects of aging on water and lubricating oil on the creep behavior of a GFRP matrix composite	285-291
Coelho, S. R. M. / Reis, P. N. B. / Ferreira, J. A. M. / Pereira, A. M.	Effects of external patch configuration on repaired composite laminates subjected to multi-impacts	259-265
Almuhammadi, Khaled / Bera, Tushar Kanti / Lubineau, Gilles	Electrical impedance spectroscopy for measuring the impedance response of carbon-fiber-reinforced polymer composite laminates	510-521
Siorikis, D. K. / Rekatsinas, C. S. / Christoforou, A. P. / Saravanos, D. A.	Experimental and numerical investigation of contact laws for the rapid simulation of low-energy impacts on laminated composite plates	646-656
Truong, B. T. / Bui, T. T. / Limam, A. / Si Larbi, A. / Le Nguyen, K. / Michel, M.	Experimental investigations of reinforced concrete beams repaired/reinforced by TRC composites	826-839
Qian, Chen / Shi, Wenku / Chen, Zhiyong / Yang, Shixiang / Song, Qianqian	Fatigue reliability design of composite leaf springs based on ply scheme optimization	40-46
Barber, Ramona B. / Hill, Craig S. / Babuska, Pavel F. / Wiebe, Richard / Aliseda, Alberto / Motley, Michael R.	Flume-scale testing of an adaptive pitch marine hydrokinetic turbine	465-473
Bae, Ji-Hun / Han, Min-Gu / Chang, Seung-Hwan	Formability of complex composite structures with ribs made of long carbon-fiber-reinforced prepregs	56-64
Yang, Sen / Chalivendra, Vijaya B. / Kim, Yong K.	Fracture and impact characterization of novel auxetic Kevlar®/Epoxy laminated composites	120-129
Barati, Mohammad Reza / Zenkour, Ashraf	A general bi-Helmholtz nonlocal strain-gradient elasticity for wave propagation in nanoporous graded double-nanobeam systems on elastic substrate	885-892
Karakoç, Alp / Hiltunen, Eero / Paltakari, Jouni	Geometrical and spatial effects on fiber network connectivity	335-344
Yu, Tian-Jun / Zhou, Sha / Yang, Xiao-Dong / Zhang, Wei	Global dynamics of composite panels with free-layer damping treatment in subsonic flow	247-258
Özden-Yenigün, Elif / Bilge, Kaan / Sünbüloğlu, Emin / Bozdağ, Ergun / Papila, Melih	High strain rate response of nanofiber interlayered structural composites	47-55
Tirillò, J. / Ferrante, L. / Sarasini, F. / Lampani, L. / Barbero, E. / Sánchez-Saez, S. / Valente, T. / Gaudenzi, P.	High velocity impact behaviour of hybrid basalt-carbon/epoxy composites	305-312
Li, Zongjun / Khennane, Amar / Hazell, Paul Jonathan / Brown, Andrew David	Impact behaviour of pultruded GFRP composites under low-velocity impact loading	360-371
Dai, Bing / Wang, Peng / Wang, Tian-Yi / You, Cheng-Wu / Yang, Zhen-Gang / Wang, Ke-Jia / Liu, Jin-Song	Improved terahertz nondestructive detection of debonds locating in layered structures based on wavelet transform	562-568
Sorrentino, L. / Turchetta, S. / Bellini, C.	In process monitoring of cutting temperature during the drilling of FRP laminate	549-561
Lee, Jong-Han	Influence of concrete strength combined with fiber content in the residual flexural strengths of fiber reinforced concrete	216-225
Dubary, N. / Taconet, G. / Bouvet, C. / Vieille, B.	Influence of temperature on the impact behavior and damage tolerance of hybrid woven-ply thermoplastic laminates for aeronautical applications	663-674
Thurnherr, C. / Groh, R. M. J. / Ermanni, P. / Weaver, P. M.	Investigation of failure initiation in curved composite laminates using a higher-order beam model	143-152
Chen, Yuan / Hou, Shujuan / Fu, Kunkun / Han, Xu / Ye, Lin	Low-velocity impact response of composite sandwich structures: Modelling and experiment	322-334
Yokozeki, Tomohiro / Shimizu, Yosuke / Ishii, Masato / Kimizuka, Ken / Suzuki, Shigeo / Yamasaki, Yoshihiro / Terashima, Keita / Kamita, Toru / Aoki, Takahira	Mechanical behavior in compression of skin-added X-lattice composite panel with corrugated ribs	863-871
Okereke, Michael I. / Paul Buckley, C. / Akpoyomare, Ambrose I.	The mechanism of rate-dependent off-axis compression of a low fibre volume fraction thermoplastic matrix composite	685-697
Costa, Sérgio / Gutkin, Renaud / Olsson, Robin	Mesh objective implementation of a fibre kinking model for damage growth with friction	384-391
Rao, Yan-Ni / Dai, Hong-Liang	Micromechanics-based thermo-viscoelastic properties prediction of fiber reinforced polymers with graded interphases and slightly weakened interfaces	440-455
Abir, M. R. / Tay, T. E. / Ridha, M. / Lee, H. P.	Modelling damage growth in composites subjected to impact and compression after impact	13-25
Abena, Alessandro / Soo, Sein Leung / Essa, Khamis	Modelling the orthogonal cutting of UD-CFRP composites: Development of a novel cohesive zone model	65-83
Vo-Duy, T. / Duong-Gia, D. / Ho-Huu, V. / Vu-Do, H. C. / Nguyen-Thoi, T.	Multi-objective optimization of laminated composite beam structures using NSGA-II algorithm	498-509
Azoti, Wiyao Leleng / Elmarakbi, Ahmed	Multiscale modelling of graphene platelets-based nanocomposite materials	313-321
Pauletta, Margherita / Cortesia, Andrea / Pitacco, Igino / Russo, Gaetano	A new bi-linear constitutive shear relationship for Unbonded Fiber-Reinforced Elastomeric Isolators (U-FREIs)	725-738
Demir, Çiğdem / Civalek, Ömer	A new nonlocal FEM via Hermitian cubic shape functions for thermal vibration of nano beams surrounded by an elastic matrix	872-884
Thurnherr, C. / Pedergnana, T. / Kress, G. / Ermanni, P.	Non-classical vibration behavior of highly anisotropic corrugated laminates	84-91
Chen, Jie / Li, Qiu-Sheng	Nonlinear aeroelastic flutter and dynamic response of composite laminated cylindrical shell in supersonic air flow	474-484
Gao, Kang / Gao, Wei / Wu, Di / Song, Chongmin	Nonlinear dynamic characteristics and stability of composite orthotropic plate on elastic foundation under thermal environment	619-632
Sheng, G. G. / Wang, X.	Nonlinear response of fluid-conveying functionally graded cylindrical shells subjected to mechanical and thermal loading conditions	675-684
Shafiei, Navvab / Mirjavadi, Seyed Sajad / Afshari, Behzad Mohasel / Rabby, Samira / Hamouda, A. M. S.	Nonlinear thermal buckling of axially functionally graded micro and nanobeams	428-439
Zhao, Yang / Huang, Yixin / Guo, Mingquan	A novel approach for free vibration of axially functionally graded beams with non-uniform cross-section based on Chebyshev polynomials theory	277-284
Deng, Jian / Zhou, Guangming / Bordas, Stéphane P. A. / Xiang, Chao / Cai, Deng'an	Numerical evaluation of buckling behaviour induced by compression on patch-repaired composites	582-596
Koch, I. / Zscheyge, M. / Tittmann, K. / Gude, M.	Numerical fatigue analysis of CFRP components	392-401
Zhai, Yanchun / Liang, Sen	Optimal lay-ups to maximize loss factor of cross-ply composite plate	597-607
Deveci, H. Arda / Artem, H. Seçil	Optimum design of fatigue-resistant composite laminates using hybrid algorithm	178-188
Na, Wonjin / Lee, Geunsung / Sung, Minchang / Han, Heung Nam / Yu, Woong-Ryeol	Prediction of the tensile strength of unidirectional carbon fiber composites considering the interfacial shear strength	92-103
Tserpes, K. I. / Chanteli, A. / Floros, I. S.	Prediction of yield strength of MWCNT/PP nanocomposite considering the interphase and agglomeration	657-662
Pan, Zhongxiang / Gu, Bohong / Sun, Baozhong / Xiong, Jie	Progressive failure of 3-D textile composites under impact loadings	710-724
Schillo, Conny / Kriegesmann, Benedikt / Krause, Dieter	Reliability based calibration of safety factors for unstiffened cylindrical composite shells	798-812
Fiorina, M. / Seman, A. / Castanié, B. / Ali, K. M. / Schwob, C. / Mezeix, L.	Spring-in prediction for carbon/epoxy aerospace composite structure	739-745
Smardzewski, Jerzy / Słonina, Michał / Maslej, Michał	Stiffness and failure behaviour of wood based honeycomb sandwich corner joints in different climates	153-163
St-Pierre, Luc / Martorell, Ned J. / Pinho, Silvestre T.	Stress redistribution around clusters of broken fibres in a composite	226-233
Hu, Yu / Chen, Wujun / Gao, Jifeng / Hu, Jianhui / Fang, Guangqiang / Peng, Fujun	A study of flattening process of deployable composite thin-walled lenticular tubes under compression and tension	164-177
Chen, Fanlong / Liu, Liwu / Lan, Xin / Li, Qinyu / Leng, Jinsong / Liu, Yanju	The study on the morphing composite propeller for marine vehicle. Part I: Design and numerical analysis	746-757
Al-Majidi, Mohammed Haloob / Lampropoulos, Andreas / Cundy, Andrew B.	Tensile properties of a novel fibre reinforced geopolymer composite with enhanced strain hardening characteristics	402-427
Bogenfeld, Raffael / Kreikemeier, Janko	A tensorial based progressive damage model for fiber reinforced polymers	608-618
Kumari, Poonam / Singh, Agyapal / Rajapakse, R. K. N. D. / Kapuria, Santosh	Three-dimensional static analysis of Levy-type functionally graded plate with in-plane stiffness variation	780-791
Al-Bayati, G. / Al-Mahaidi, R. / Kalfat, R.	Torsional strengthening of reinforced concrete beams using different configurations of NSM FRP with epoxy resins and cement-based adhesives	569-581
Zhou, Haili / Hu, Dongmei / Gu, Bohong / Sun, Baozhong	Transverse impact performance and finite element analysis of three dimensional braided composite tubes with different braiding layers	345-359
Carrazedo, Rogério / Coda, Humberto Breves	Triangular based prismatic finite element for the analysis of orthotropic laminated beams, plates and shells	234-246
Yang, Zhi-Bo / Radzieński, Maciej / Kudela, Pawel / Ostachowicz, Wieslaw	Two-dimensional Chebyshev pseudo spectral modal curvature and its application in damage detection for composite plates	372-383
Pérez, L. / Mercado, R. / Alfonso, I.	Young's modulus estimation for CNT reinforced metallic foams obtained using different space holder particles	26-32

Über diese
Datenseite
IssueID
37820
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - Mai 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Mai 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.