Composite Structures - Dezember 2017

Erschienen:	Dezember 2017

Autor(en)	Titel	Seite(n)
de Matos Junior, Odeny D. / Donadon, Maurício V. / Castro, Saullo G. P.	Aeroelastic behavior of stiffened composite laminated panel with embedded SMA wire using the hierarchical Rayleigh–Ritz method	26-45
Hao, Peng / Liu, Chen / Yuan, Xiaojie / Wang, Bo / Li, Gang / Zhu, Tianyu / Niu, Fei	Buckling optimization of variable-stiffness composite panels based on flow field function	240-255
Kaleel, I. / Petrolo, M. / Waas, A. M. / Carrera, E.	Computationally efficient, high-fidelity micromechanics framework using refined 1D models	358-367
Berkache, K. / Deogekar, S. / Goda, I. / Picu, R. C. / Ganghoffer, J.-F.	Construction of second gradient continuum models for random fibrous networks and analysis of size effects	347-357
Miguel Silva, Jorge / Ferreira, Filipe / Abreu, Stella M. / Matos, João E. / Durão, Luís Miguel P.	Correlation of drilling damage with mechanical strength: A geometrical approach	306-314
Harries, Kent A. / Guo, Qi / Cardoso, Daniel	Creep and creep buckling of pultruded glass-reinforced polymer members	315-324
Rouzegar, Jafar / Gholami, Mohammad	Creep and recovery of viscoelastic laminated composite plates	256-272
Roy, Samit / Kumar, Abhishek	Effect of particle size on mixed-mode fracture of nanographene reinforced epoxy and mode I delamination of its carbon fiber composite	1-8
Serra, Joël / Bouvet, Christophe / Castanié, Bruno / Petiot, Caroline	Experimental and numerical analysis of Carbon Fiber Reinforced Polymer notched coupons under tensile loading	145-157
Thomson, Daniel M. / Cui, Hao / Erice, Borja / Hoffmann, Justus / Wiegand, Jens / Petrinić, Nik	Experimental and numerical study of strain-rate effects on the IFF fracture angle using a new efficient implementation of Puck’s criterion	325-335
Ascione, Francesco / Lamberti, Marco / Napoli, Annalisa / Razaqpur, Ghani / Realfonzo, Roberto	An experimental investigation on the bond behavior of steel reinforced polymers on concrete substrate	58-72
Xu, Z. W. / Guan, Z. W. / Cantwell, W. J.	An experimental study of scaling effects in the perforation resistance of woven CFRP laminates	285-293
Zhang, Shun-Qi / Zhao, Guo-Zhong / Zhang, Shu-Yang / Schmidt, Rüdiger / Qin, Xian-Sheng	Geometrically nonlinear FE analysis of piezoelectric laminated composite structures under strong driving electric field	112-120
Läufer, J. / Becker, V. / Wagner, W.	Gradient enhancement of a transversely isotropic continuum damage model	138-144
Afroughsabet, Vahid / Biolzi, Luigi / Ozbakkaloglu, Togay	Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high performance recycled aggregate concrete	273-284
Pappas, Georgios / Joncas, Simon / Michaud, Véronique / Botsis, John	The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part II – Modeling	379-390
Katunin, Andrzej / Krukiewicz, Katarzyna / Turczyn, Roman / Sul, Przemysław / Dragan, Krzysztof	Lightning strike resistance of an electrically conductive CFRP with a CSA-doped PANI/epoxy matrix	203-213
Yanes-Armas, Sonia / De Castro, Julia / Keller, Thomas	Long-term design of FRP-PUR web-core sandwich structures in building construction	214-228
Garoz, D. / Gilabert, F. A. / Sevenois, R. D. B. / Spronk, S. W. F. / Van Paepegem, W.	Material parameter identification of the elementary ply damage mesomodel using virtual micro-mechanical tests of a carbon fiber epoxy system	391-404
Rozylo, P. / Debski, H. / Kubiak, T.	A model of low-velocity impact damage of composite plates subjected to Compression-After-Impact (CAI) testing	158-170
Liu, Gang / Zhang, Li / Guo, Licheng / Wang, Qimei / Liao, Feng	A modified V-notched beam test method for interlaminar shear behavior of 3D woven composites	46-57
Tao, Wei / Liu, Zhao / Zhu, Ping / Zhu, Chao / Chen, Wei	Multi-scale design of three dimensional woven composite automobile fender using modified particle swarm optimization algorithm	73-83
Matsuo, Tsuyoshi / Kan, Mitsuharu / Furukawa, Kenichi / Sumiyama, Takuya / Enomoto, Hiroshi / Sakaguchi, Keisuke	Numerical modeling and analysis for axial compressive crushing of randomly oriented thermoplastic composite tubes based on the out-of-plane damage mechanism	368-378
Caratelli, Angelo / Meda, Alberto / Rinaldi, Zila / Spagnuolo, Simone / Maddaluno, Giona	Optimization of GFRP reinforcement in precast segments for metro tunnel lining	336-346
Alessi, R. / Freddi, F.	Phase-field modelling of failure in hybrid laminates	9-25
Barati, Mohammad Reza / Zenkour, Ashraf M.	Post-buckling analysis of refined shear deformable graphene platelet reinforced beams with porosities and geometrical imperfection	194-202
Hristov, P. O. / DiazDelaO, F. A. / Saavedra Flores, E. I. / Guzmán, C. F. / Farooq, U.	Probabilistic sensitivity analysis to understand the influence of micromechanical properties of wood on its macroscopic response	229-239
Goldfeld, Y. / Quadflieg, T. / Gries, T.	Sensing capabilities of carbon based TRC beam from slack to pull-out mechanism	294-305
Franciszczak, P. / Merijs-Meri, R. / Kalnins, K. / Błędzki, A. K. / Zicans, J.	Short-fibre hybrid polypropylene composites reinforced with PET and Rayon fibres – Effects of SSP and interphase tailoring	121-137
Lan, Chengming / Wu, Jingyu / Bai, Nani / Qiang, Dan / Li, Hui	Size effect on tensile strength of parallel CFRP wire stay cable	96-111
Liu, Bin / Xu, Fei / Qin, Jian / Lu, Zhixian	Study on impact damage mechanisms and TAI capacity for the composite scarf repair of the primary load-bearing level	183-193
Han, Quanfeng / Wang, Zewu / Nash, David H. / Liu, Peiqi	Thermal buckling analysis of cylindrical shell with functionally graded material coating	171-182
Ahmed, Adnan / Kapuria, Santosh	Third order theory based quadrilateral element for delaminated composite plates with a hybrid method for satisfying continuity at delamination fronts	84-95

Autor(en)

Titel

Seite(n)

de Matos Junior, Odeny D. / Donadon, Maurício V. / Castro, Saullo G. P.

Aeroelastic behavior of stiffened composite laminated panel with embedded SMA wire using the hierarchical Rayleigh–Ritz method

26-45

Hao, Peng / Liu, Chen / Yuan, Xiaojie / Wang, Bo / Li, Gang / Zhu, Tianyu / Niu, Fei

Buckling optimization of variable-stiffness composite panels based on flow field function

240-255

Kaleel, I. / Petrolo, M. / Waas, A. M. / Carrera, E.

Computationally efficient, high-fidelity micromechanics framework using refined 1D models

358-367

Berkache, K. / Deogekar, S. / Goda, I. / Picu, R. C. / Ganghoffer, J.-F.

Construction of second gradient continuum models for random fibrous networks and analysis of size effects

347-357

Miguel Silva, Jorge / Ferreira, Filipe / Abreu, Stella M. / Matos, João E. / Durão, Luís Miguel P.

Correlation of drilling damage with mechanical strength: A geometrical approach

306-314

Harries, Kent A. / Guo, Qi / Cardoso, Daniel

Creep and creep buckling of pultruded glass-reinforced polymer members

315-324

Rouzegar, Jafar / Gholami, Mohammad

Creep and recovery of viscoelastic laminated composite plates

256-272

Roy, Samit / Kumar, Abhishek

Effect of particle size on mixed-mode fracture of nanographene reinforced epoxy and mode I delamination of its carbon fiber composite

1-8

Serra, Joël / Bouvet, Christophe / Castanié, Bruno / Petiot, Caroline

Experimental and numerical analysis of Carbon Fiber Reinforced Polymer notched coupons under tensile loading

145-157

Thomson, Daniel M. / Cui, Hao / Erice, Borja / Hoffmann, Justus / Wiegand, Jens / Petrinić, Nik

Experimental and numerical study of strain-rate effects on the IFF fracture angle using a new efficient implementation of Puck’s criterion

325-335

Ascione, Francesco / Lamberti, Marco / Napoli, Annalisa / Razaqpur, Ghani / Realfonzo, Roberto

An experimental investigation on the bond behavior of steel reinforced polymers on concrete substrate

58-72

Xu, Z. W. / Guan, Z. W. / Cantwell, W. J.

An experimental study of scaling effects in the perforation resistance of woven CFRP laminates

285-293

Zhang, Shun-Qi / Zhao, Guo-Zhong / Zhang, Shu-Yang / Schmidt, Rüdiger / Qin, Xian-Sheng

Geometrically nonlinear FE analysis of piezoelectric laminated composite structures under strong driving electric field

112-120

Läufer, J. / Becker, V. / Wagner, W.

Gradient enhancement of a transversely isotropic continuum damage model

138-144

Afroughsabet, Vahid / Biolzi, Luigi / Ozbakkaloglu, Togay

Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high performance recycled aggregate concrete

273-284

Pappas, Georgios / Joncas, Simon / Michaud, Véronique / Botsis, John

The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part II – Modeling

379-390

Katunin, Andrzej / Krukiewicz, Katarzyna / Turczyn, Roman / Sul, Przemysław / Dragan, Krzysztof

Lightning strike resistance of an electrically conductive CFRP with a CSA-doped PANI/epoxy matrix

203-213

Yanes-Armas, Sonia / De Castro, Julia / Keller, Thomas

Long-term design of FRP-PUR web-core sandwich structures in building construction

214-228

Garoz, D. / Gilabert, F. A. / Sevenois, R. D. B. / Spronk, S. W. F. / Van Paepegem, W.

Material parameter identification of the elementary ply damage mesomodel using virtual micro-mechanical tests of a carbon fiber epoxy system

391-404

Rozylo, P. / Debski, H. / Kubiak, T.

A model of low-velocity impact damage of composite plates subjected to Compression-After-Impact (CAI) testing

158-170

Liu, Gang / Zhang, Li / Guo, Licheng / Wang, Qimei / Liao, Feng

A modified V-notched beam test method for interlaminar shear behavior of 3D woven composites

46-57

Tao, Wei / Liu, Zhao / Zhu, Ping / Zhu, Chao / Chen, Wei

Multi-scale design of three dimensional woven composite automobile fender using modified particle swarm optimization algorithm

73-83

Matsuo, Tsuyoshi / Kan, Mitsuharu / Furukawa, Kenichi / Sumiyama, Takuya / Enomoto, Hiroshi / Sakaguchi, Keisuke

Numerical modeling and analysis for axial compressive crushing of randomly oriented thermoplastic composite tubes based on the out-of-plane damage mechanism

368-378

Caratelli, Angelo / Meda, Alberto / Rinaldi, Zila / Spagnuolo, Simone / Maddaluno, Giona

Optimization of GFRP reinforcement in precast segments for metro tunnel lining

336-346

Alessi, R. / Freddi, F.

Phase-field modelling of failure in hybrid laminates

9-25

Barati, Mohammad Reza / Zenkour, Ashraf M.

Post-buckling analysis of refined shear deformable graphene platelet reinforced beams with porosities and geometrical imperfection

194-202

Hristov, P. O. / DiazDelaO, F. A. / Saavedra Flores, E. I. / Guzmán, C. F. / Farooq, U.

Probabilistic sensitivity analysis to understand the influence of micromechanical properties of wood on its macroscopic response

229-239

Goldfeld, Y. / Quadflieg, T. / Gries, T.

Sensing capabilities of carbon based TRC beam from slack to pull-out mechanism

294-305

Franciszczak, P. / Merijs-Meri, R. / Kalnins, K. / Błędzki, A. K. / Zicans, J.

Short-fibre hybrid polypropylene composites reinforced with PET and Rayon fibres – Effects of SSP and interphase tailoring

121-137

Lan, Chengming / Wu, Jingyu / Bai, Nani / Qiang, Dan / Li, Hui

Size effect on tensile strength of parallel CFRP wire stay cable

96-111

Liu, Bin / Xu, Fei / Qin, Jian / Lu, Zhixian

Study on impact damage mechanisms and TAI capacity for the composite scarf repair of the primary load-bearing level

183-193

Han, Quanfeng / Wang, Zewu / Nash, David H. / Liu, Peiqi

Thermal buckling analysis of cylindrical shell with functionally graded material coating

171-182

Ahmed, Adnan / Kapuria, Santosh

Third order theory based quadrilateral element for delaminated composite plates with a hybrid method for satisfying continuity at delamination fronts

84-95

Anzeige

Composite Structures - Dezember 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Dezember 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.