Composite Structures - Februar 2018

Erschienen:	Februar 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Lin, Huagang / Cao, Dengqing / Shao, Chonghui	An admissible function for vibration and flutter studies of FG cylindrical shells with arbitrary edge conditions using characteristic orthogonal polynomials	748-763
Fei, Han / Danhui, Dan / Cheng, Wei / Jia, Pengfei	Analysis on the dynamic characteristic of a tensioned double-beam system with a semi theoretical semi numerical method	584-599
Gong, Chunlin / Wang, Yifan / Gu, Liangxian / Shi, Shengbo	An approach for stress analysis of corrugated-core integrated thermal protection system under thermal and mechanical environment	1-26
Shahabodini, A. / Ansari, R. / Darvizeh, M.	Atomistic-continuum modeling of vibrational behavior of carbon nanotubes using the variational differential quadrature method	728-747
Ding, Yao / Yu, Jiang-Tao / Yu, Ke-Quan / Xu, Shi-lang	Basic mechanical properties of ultra-high ductility cementitious composites: From 40 MPa to 120 MPa	634-645
Sun, Yang / Guo, Li-cheng / Wang, Tian-shu / Zhong, Su-yang / Pan, Hai-zhu	Bending behavior of composite sandwich structures with graded corrugated truss cores	446-454
Mehboob, Ali / Chang, Seung-Hwan	Biomechanical simulation of healing process of fractured femoral shaft applied by composite intramedullary nails according to fracture configuration	81-93
Justo, J. / Távara, L. / García-Guzmán, L. / París, F.	Characterization of 3D printed long fibre reinforced composites	537-548
Orell, Olli / Vuorinen, Jyrki / Jokinen, Jarno / Kettunen, Heikki / Hytönen, Pertti / Turunen, Jani / Kanerva, Mikko	Characterization of elastic constants of anisotropic composites in compression using digital image correlation	176-185
Zhang, Jipeng / Wang, Yue / Zhang, Jiazhen / Zhou, Zhengong / Fang, Guodong / Zhao, Yuan / Zu, Shiming	Characterizing the off-axis dependence of failure mechanism in notched fiber metal laminates	148-160
Jang, Seok-Joon / Yun, Hyun-Do	Combined effects of steel fiber and coarse aggregate size on the compressive and flexural toughness of high-strength concrete	203-211
Guo, Wei / Fan, Wei / Shao, Xudong / Shen, Dongjie / Chen, Baisheng	Constitutive model of ultra-high-performance fiber-reinforced concrete for low-velocity impact simulations	307-326
Ebrahimi, Farzad / Barati, Mohammad Reza	Damping vibration analysis of graphene sheets on viscoelastic medium incorporating hygro-thermal effects employing nonlocal strain gradient theory	241-253
Cannella, Ferdinando / Garinei, Alberto / Marsili, Roberto / Speranzini, Emanuela	Dynamic mechanical analysis and thermoelasticity for investigating composite structural elements made with additive manufacturing	466-473
Song, Zhenhua / Li, Shiqiang / Lei, Jianyin / Noble, Robert L. / Wang, Zhihua	Dynamic tensile properties of ROP/OCC natural hybrid fibers reinforced composites	600-606
Golewski, Grzegorz Ludwik	Effect of curing time on the fracture toughness of fly ash concrete composites	105-112
Park, Sang Yoon / Choi, Won Jong / Choi, Chi Hoon / Choi, Heung Soap	Effect of drilling parameters on hole quality and delamination of hybrid GLARE laminate	684-698
Espadas-Escalante, J. J. / van Dijk, N. P. / Isaksson, P.	The effect of free-edges and layer shifting on intralaminar and interlaminar stresses in woven composites	212-220
Kim, G. M. / Nam, I. W. / Yoon, H. N. / Lee, H. K.	Effect of superplasticizer type and siliceous materials on the dispersion of carbon nanotube in cementitious composites	264-272
Rajaei, M. / Kim, N. K. / Bhattacharyya, D.	Effects of heat-induced damage on impact performance of epoxy laminates with glass and flax fibres	515-523
Shi, Danghe / Xiao, Xinran	An enhanced continuum damage mechanics model for crash simulation of composites	774-785
Barulich, Néstor Darío / Godoy, Luis Augusto / Dardati, Patricia Mónica	Evaluation of cross-ply laminate stiffness with a non-uniform distribution of transverse matrix cracks by means of a computational meso-mechanic model	561-572
Nzabonimpa, J. D. / Hong, Won-Kee / Kim, Jisoon	Experimental and non-linear numerical investigation of the novel detachable mechanical joints with laminated plates for composite precast beam-column joint	286-303
Ouadday, R. / Marouene, A. / Morada, G. / Kaabi, A. / Boukhili, R. / Vadean, A.	Experimental and numerical investigation on the impact behavior of dual-core composite sandwich panels designed for hydraulic turbine applications	254-263
Kadhim, Majid M. A. / Wu, Zhangjian / Cunningham, Lee S.	Experimental study of CFRP strengthened steel columns subject to lateral impact loads	94-104
Nie, X. F. / Zhang, S. S. / Teng, J. G. / Chen, G. M.	Experimental study on RC T-section beams with an FRP-strengthened web opening	273-285
Fang, Yi / Zhang, Xin / Zhou, Jie	Experiments on reflection and transmission of acoustic porous metasurface with composite structure	508-514
Naderi Beni, N. / Botshekanan Dehkordi, M.	An extension of Carrera unified formulation in polar coordinate for analysis of circular sandwich plate with FGM core using GDQ method	421-434
Feng, W. J. / Yan, Z.	Fracture analysis on an arc-shaped interfacial crack between a superconducting cylinder and its functionally graded coating with transport currents	338-347
Zhang, Dongming / Gu, Xiang-Lin / Yu, Qian-Qian / Huang, Hongwei / Wan, Baolin / Jiang, Cheng	Fully probabilistic analysis of FRP-to-concrete bonded joints considering model uncertainty	786-806
Bambach, M. R.	Geometric optimisation and compression design of natural fibre composite structural channel sections	549-560
Iskander, Mina / El-Hacha, Raafat / Shrive, Nigel	' Governing failure criterion of short-span hybrid FRP-UHPC beams subjected to high shear forces	123-131
Tessema, Addis / Ravindran, Suraj / Kidane, Addis	Gradual damage evolution and propagation in quasi-isotropic CFRC under quasi-static loading	186-192
Hosseini, A. / Kashani, M. H. / Sassani, F. / Milani, A. S. / Ko, F. K.	Identifying the distinct shear wrinkling behavior of woven composite preforms under bias extension and picture frame tests	764-773
Wang, Yue / Zhang, Jipeng / Fang, Guodong / Zhang, Jiazhen / Zhou, Zhengong / Wang, Shiyu	Influence of temperature on the impact behavior of woven-ply carbon fiber reinforced thermoplastic composites	435-445
Vinyas, M. / Kattimani, S. C.	Investigation of the effect of BaTiO3/CoFe2O4 particle arrangement on the static response of magneto-electro-thermo-elastic plates	51-64
Ahmadi, Habiburrahman / Rasheed, Hayder A.	Lateral torsional buckling of anisotropic laminated thin-walled simply supported beams subjected to mid-span concentrated load	348-361
Zhou, Hui / Xu, Ping / Xie, Suchao / Feng, Zhejun / Wang, Da	Mechanical performance and energy absorption properties of structures combining two Nomex honeycombs	524-536
Wang, Bing / Hu, Jiqiang / Li, YanQi / Yao, Yongtao / Wang, ShiXun / Ma, Li	Mechanical properties and failure behavior of the sandwich structures with carbon fiber-reinforced X-type lattice truss core	619-633
Wu, Wenwang / Song, Xiaoke / Liang, Jun / Xia, Re / Qian, Guian / Fang, Daining	Mechanical properties of anti-tetrachiral auxetic stents	381-392
Karttunen, Anssi T. / Reddy, J. N. / Romanoff, Jani	Micropolar modeling approach for periodic sandwich beams	656-664
Shi, Yang	Modeling of nonlinear magnetoelectric coupling in layered magnetoelectric nanocomposites with surface effect	474-482
Isleem, Haytham F. / Wang, Daiyu / Wang, Zhenyu	Modeling the axial compressive stress-strain behavior of CFRP-confined rectangular RC columns under monotonic and cyclic loading	229-240
Shrivastava, Sachin / Mohite, P. M. / Yadav, Tarun / Malagaudanavar, Appasaheb	Multi-objective multi-laminate design and optimization of a Carbon Fibre Composite wing torsion box using evolutionary algorithm	132-147
He, Meng-Xin / Sun, Jian-Qiao	Multi-objective structural-acoustic optimization of beams made of functionally graded materials	221-228
Zhu, Jun / Wang, Jihui / Ni, Aiqing / Guo, Wantao / Li, Xiang / Wu, Yibo	A multi-parameter model for stiffness prediction of composite laminates with out-of-plane ply waviness	327-337
Huang, Tao / Gong, Yaohua	A multiscale analysis for predicting the elastic properties of 3D woven composites containing void defects	401-410
Yang, Z. X. / Dang, P. F. / Han, Q. K. / Jin, Z. H.	Natural characteristics analysis of magneto-electro-elastic multilayered plate using analytical and finite element method	411-420
Cong, Pham Hong / Khanh, Nguyen Duy / Khoa, Nguyen Dinh / Duc, Nguyen Dinh	New approach to investigate nonlinear dynamic response of sandwich auxetic double curves shallow shells using TSDT	455-465
Barazanchy, D. / Roth, W. / Giurgiutiu, V.	A non-destructive material characterization framework for retrieving a stiffness matrix using bulk waves	27-37
Han, Dae-Hyun / Kang, Lae-Hyong	Nondestructive evaluation of GFRP composite including multi-delamination using THz spectroscopy and imaging	161-175
Raghu, P. / Rajagopal, A. / Reddy, J. N.	Nonlocal nonlinear finite element analysis of composite plates using TSDT	38-50
Zenkour, Ashraf M.	A novel mixed nonlocal elasticity theory for thermoelastic vibration of nanoplates	821-833
Machado, J. J. M. / Gamarra, P.M-R. / Marques, E. A. S. / da Silva, Lucas F. M.	Numerical study of the behaviour of composite mixed adhesive joints under impact strength for the automotive industry	373-380
Sikdar, Shirsendu / Kudela, Pawel / Radzieński, Maciej / Kundu, Abhishek / Ostachowicz, Wiesław	Online detection of barely visible low-speed impact damage in 3D-core sandwich composite structure	646-655
Javidrad, F. / Nazari, M. / Javidrad, H. R.	Optimum stacking sequence design of laminates using a hybrid PSO-SA method	607-618
Shao, Ruizhe / Wu, Chengqing / Liu, Zhongxian / Su, Yu / Liu, Jian / Chen, Gang / Xu, Shenchun	Penetration resistance of ultra-high-strength concrete protected with layers of high-toughness and lightweight energy absorption materials	807-820
Sohn, Dongwoo	Periodic mesh generation and homogenization of inclusion-reinforced composites using an element-carving technique with local mesh refinement	65-80
Tang, Ye / Yang, Tianzhi	Post-buckling behavior and nonlinear vibration analysis of a fluid-conveying pipe composed of functionally graded material	393-400
Tian, Ziyang / Yan, Ying / Li, Jie / Hong, Yang / Guo, Fangliang	Progressive damage and failure analysis of three-dimensional braided composites subjected to biaxial tension and compression	496-507
Wang, Zhen / Khalid, Hammad R. / Seo, J. H. / Kang, Jingfu / Lee, H. K.	Pull-off bond behavior of anchored random-chopped FRP composites bonded to concrete	193-202
Rafiee, Roham / Torabi, Mohammad Ali	Stochastic prediction of burst pressure in composite pressure vessels	573-583
Khechai, A. / Tatì, A. / Guerira, B. / Guettala, A. / Mohite, P. M.	Strength degradation and stress analysis of composite plates with circular, square and rectangular notches using digital image correlation	699-715
Yan, Xiaofei / Cao, Shengbin	Structure and interfacial shear strength of polypropylene-glass fiber/carbon fiber hybrid composites fabricated by direct fiber feeding injection molding	362-372
Li, D. H. / Fish, J.	Thermomechanical Extended Layerwise Method for laminated composite plates with multiple delaminations and transverse cracks	665-683
Turner, Paul / Liu, Tao / Zeng, Xuesen / Brown, Kevin	Three-dimensional woven carbon fibre polymer composite beams and plates under ballistic impact	483-495
Sistaninia, M. / Kasberger, R. / Kolednik, O.	To the design of highly fracture-resistant composites by the application of the yield stress inhomogeneity effect	113-122
Zhao, Zhao / Wen, Shurui / Li, Fengming	Vibration analysis of multi-span lattice sandwich beams using the assumed mode method	716-727

Über diese
Datenseite
IssueID
37803
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - Februar 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Februar 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.