Composite Structures - Februar 2019

Erschienen:	Februar 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Riaño, Lina / Joliff, Yoann	An Abaqus™ plug-in for the geometry generation of Representative Volume Elements with randomly distributed fibers and interphases	644-651
Ishikawa, Masashi / Ando, Masaki / Koyama, Masashi / Nishino, Hideo	Active thermographic inspection of carbon fiber reinforced plastic laminates using laser scanning heating	515-522
Qi, Lehua / Li, Shaolin / Zhang, Ting / Zhou, Jiming / Li, Hejun	An analysis of the factors affecting strengthening in carbon fiber reinforced magnesium composites	328-336
Mieloszyk, Magdalena / Majewska, Katarzyna / Ostachowicz, Wieslaw	Application of THz spectroscopy for localisation of fibre optics embedded into glass fibre reinforced composite	548-560
Kim, Jinseok / Żur, Krzysztof Kamil / Reddy, J. N.	Bending, free vibration, and buckling of modified couples stress-based functionally graded porous micro-plates	879-888
Cui, Da / Li, Daokui	Bending-twisting coupled structures based on composite laminates with extension-shear coupling effect	434-442
Ren, Lijie / Ma, Honghao / Shen, Zhaowu / Wang, Yixin	Blast response of water-backed metallic sandwich panels subject to underwater explosion – Experimental and numerical investigations	79-92
Sofiyev, A. H.	The buckling and vibration analysis of coating-FGM-substrate conical shells under hydrostatic pressure with mixed boundary conditions	686-693
Verma, Amrit Shankar / Vedvik, Nils Petter / Haselbach, Philipp Ulrich / Gao, Zhen / Jiang, Zhiyu	Comparison of numerical modelling techniques for impact investigation on a wind turbine blade	856-878
Lim, Teik-Cheng	Composite microstructures with Poisson’s ratio sign switching upon stress reversal	34-44
Sellitto, A. / Riccio, A. / Russo, A. / Zarrelli, M. / Toscano, C. / Lopresto, V.	Compressive behaviour of a damaged omega stiffened panel: Damage detection and numerical analysis	300-316
Linul, Emanoil / Marsavina, Liviu / Linul, Petrică-Andrei / Kovacik, Jaroslav	Cryogenic and high temperature compressive properties of Metal Foam Matrix Composites	490-498
Li, Yizhuo / Pimenta, Soraia	Development and assessment of modelling strategies to predict failure in tow-based discontinuous composites	1005-1021
Kexel, Christian / Maetz, Thomas / Mälzer, Moritz / Moll, Jochen	Digital communication across orthotropic composite components using guided waves	481-489
Liu, Zhe / Li, Peifeng / Srikanth, Narasimalu	Effect of delamination on the flexural response of [+45/−45/0]2s carbon fibre reinforced polymer laminates	93-102
Joosten, M. W. / Hirth, C. / Thomson, R. / Koerber, H.	Effect of environmental conditions on the failure mechanisms and energy absorption of open-section crush elements under quasi-static loading	747-753
Hou, Xiaomeng / Ren, Pengfei / Rong, Qin / Zheng, Wenzhong / Zhan, Yao	Effect of fire insulation on fire resistance of hybrid-fiber reinforced reactive powder concrete beams	219-232
Yang, Yuxing / Wang, Yi-Qi / Liu, Xueshu / Gao, Hang / Bao, Yongjie	The effect of shimming material on flexural behavior for composite joints with assembly gap	375-382
Xin, Zhibo / Duan, Yugang / Zhou, Jin / Xiao, Hong	Effect of tailored plies on the energy absorption capability of square CFRP tubes with discontinuous fibers	150-159
Shufrin, Igor / Pasternak, Elena / Dyskin, Arcady V.	Effective properties of layered auxetic hybrids	391-400
Albazzan, Mazen A. / Harik, Ramy / Tatting, Brian F. / Gürdal, Zafer	Efficient design optimization of nonconventional laminated composites using lamination parameters: A state of the art	362-374
Maes, Vincent K. / Pavlov, Leonid / Simonian, Sahak M. (Samo)	An efficient semi-automated optimisation approach for (grid-stiffened) composite structures: Application to Ariane 6 Interstage	1042-1049
Castro, Saullo G. P. / Donadon, Maurício V. / Guimarães, Thiago A. M.	ES-PIM applied to buckling of variable angle tow laminates	67-78
Krahl, Pablo Augusto / Martins, Diego de Oliveira / Carrazedo, Ricardo / Silva, Irineu da / El Debs, Mounir Khalil	Experimental and analytical studies on the lateral instability of UHPFRC beams lifted by cables	652-667
Díaz-Álvarez, A. / Díaz-Álvarez, J. / Santiuste, C. / Miguélez, M. H.	Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites	700-709
Sun, Guangyong / Wang, Zhen / Yu, Hang / Gong, Zhihui / Li, Qing	Experimental and numerical investigation into the crashworthiness of metal-foam-composite hybrid structures	535-547
Mahmoud, B. / Manseri, L. / Rogani, A. / Navarro, P. / Marguet, S. / Ferrero, J-F. / Tawk, I.	Experimental and numerical study of the damage mechanisms in hybrid unidirectional/woven composites under impact loading	606-615
Li, Junhui / Deng, Jun / Wang, Yi / Guan, Jianji / Zheng, Hengzhong	Experimental study of notched steel beams strengthened with a CFRP plate subjected to overloading fatigue and wetting/drying cycles	634-643
Haji, M. / Naderpour, H. / Kheyroddin, A.	Experimental study on influence of proposed FRP-strengthening techniques on RC circular short columns considering different types of damage index	112-128
Solazzi, Luigi	Feasibility study of hydraulic cylinder subject to high pressure made of aluminum alloy and composite material	739-746
Montemurro, Marco / Catapano, Anita	A general B-Spline surfaces theoretical framework for optimisation of variable angle-tow laminates	561-578
Guan, Xianlei / Sok, Kyongjin / Wang, Ailun / Shuai, Cijun / Tang, Jinyuan / Wang, Qingshan	A general vibration analysis of functionally graded porous structure elements of revolution with general elastic restraints	277-299
Shen, Zhiqiang / Xia, Jun / Cheng, Pan	Geometrically nonlinear dynamic analysis of FG-CNTRC plates subjected to blast loads using the weak form quadrature element method	775-788
Nasri, M. / Garnier, C. / Abbassi, F. / Labanieh, A. R. / Dalverny, O. / Zghal, A.	Hybrid approach for woven fabric modelling based on discrete hypoelastic behaviour and experimental validation	992-1004
Falliano, Devid / De Domenico, Dario / Ricciardi, Giuseppe / Gugliandolo, Ernesto	Improving the flexural capacity of extrudable foamed concrete with glass-fiber bi-directional grid reinforcement: An experimental study	45-59
Smarzewski, Piotr	Influence of basalt-polypropylene fibres on fracture properties of high performance concrete	23-33
Tauhiduzzaman, Mohammad / Carlsson, Leif A.	Influence of constraints on the effective inplane extensional properties of honeycomb core	616-624
Shi, Qinghe / Wang, Xiaojun / Wang, Ruixing / Chen, Xiao / Ma, Yujia	An interval updating model for composite structures optimization	177-191
Tan, Huancheng / Liu, Lulu / Guan, Yupu / Chen, Wei / Zhao, Zhenhua	Investigation of three-dimensional braided composites subjected to steel projectile impact: Automatically modelling mesoscale finite element model	317-327
Gong, Linhui / Yang, Heng / Ke, Yuchao / Wang, Shen / Yao, Xuefeng	Investigation on vulcanization degree and residual stress on fabric rubber composites	472-480
Abouhamzeh, M. / Sinke, J. / Benedictus, R.	A large displacement orthotropic viscoelastic model for manufacturing-induced distortions in Fibre Metal Laminates	1035-1041
Lombetti, D. M. / Skordos, A. A.	Lightning strike and delamination performance of metal tufted carbon composites	694-699
Quagliato, Luca / Jang, Changsoon / Kim, Naksoo	Manufacturing process and mechanical properties characterization for steel skin – Carbon fiber reinforced polymer core laminate structures	1-12
Zarei, A. / Khosravifard, A.	A meshfree method for static and buckling analysis of shear deformable composite laminates considering continuity of interlaminar transverse shearing stresses	206-218
Fraddosio, Aguinaldo / Pavone, Gaetano / Daniele Piccioni, Mario	Minimal mass and self-stress analysis for innovative V-Expander tensegrity cells	754-774
Cinefra, Maria / Kumar, S. Keshava / Carrera, Erasmo	MITC9 Shell elements based on RMVT and CUF for the analysis of laminated composite plates and shells	383-390
Natarajan, Sundararajan / Annabattula, Ratna Kumar	Modeling crack propagation in variable stiffness composite laminates using the phase field method	424-433
Moran, Domingo A. / Pantelides, Chris P. / Reaveley, Lawrence D.	Mohr-coulomb model for rectangular and square FRP-confined concrete	889-904
An, Haichao / Chen, Shenyan / Huang, Hai	Multi-objective optimal design of hybrid composite laminates for minimum cost and maximum fundamental frequency and frequency gaps	268-276
Chevalier, J. / Camanho, P. P. / Lani, F. / Pardoen, T.	Multi-scale characterization and modelling of the transverse compression response of unidirectional carbon fiber reinforced epoxy	160-176
Khattab, I.Al. / Sinapius, M.	Multiscale modelling and simulation of polymer nanocomposites using transformation field analysis (TFA)	981-991
Lin, B. C. / Xie, T. F. / Xu, M. / Li, Y. H. / Yang, J.	Natural frequencies and dynamic responses of rotating composite non-uniform beams with an elastically root in hygrothermal environment	968-980
Swiderski, Waldemar	Non-destructive testing of CFRP by laser excited thermography	710-714
Fan, Yin / Xiang, Y. / Shen, Hui-Shen	Nonlinear forced vibration of FG-GRC laminated plates resting on visco-Pasternak foundations	443-452
Liu, Liu / Li, Jin-Ming / Kardomateas, George A.	Nonlinear vibration of a composite plate to harmonic excitation with initial geometric imperfection in thermal environments	401-423
Yu, Haiyan / Shi, HuiRu / Chen, Siji	A novel multi-cell CFRP/AA6061 hybrid tube and its structural multiobjective optimization	579-589
Shariyat, M. / Hosseini, S. H.	Novel rule-based global-local theory and energy model for sandwich plates with compliant cores and unevenly-distributed anisotropic SMA wires under impulsive/impact loads	727-738
Rodacki, Konrad / Furtak, Kazimierz	Numerical analysis of crack development of timber-glass composite I-beams in the extended finite element method (XFEM)	349-361
de Souza Eloy, Felipe / Gomes, Guilherme Ferreira / Ancelotti, Antônio Carlos / da Cunha, Sebastião Simões / Bombard, Antonio José Faria / Junqueira, Diego Morais	A numerical-experimental dynamic analysis of composite sandwich beam with magnetorheological elastomer honeycomb core	242-257
Lei, Jian / He, Yuming / Li, Zhenkun / Guo, Song / Liu, Dabiao	Postbuckling analysis of bi-directional functionally graded imperfect beams based on a novel third-order shear deformation theory	811-829
das Neves Carneiro, Gonçalo / Conceição António, Carlos	Reliability-based Robust Design Optimization with the Reliability Index Approach applied to composite laminate structures	844-855
Gereke, Thomas / Cherif, Chokri	A review of numerical models for 3D woven composite reinforcements	60-66
Nguyen, Sy-Tuan	A simple yet accurate method to model the effective elastic and transport properties of particulate and fiber composites	508-514
Naskar, Susmita / Mukhopadhyay, Tanmoy / Sriramula, Srinivas	Spatially varying fuzzy multi-scale uncertainty propagation in unidirectional fibre reinforced composites	940-967
Mondal, Susmita / Ramachandra, L. S.	Stability and failure analyses of delaminated composite plates subjected to localized heating	258-267
Wu, Fei / Liu, Tao / Xiao, Xiaoting / Zhang, Zhengrong / Hou, Junliang	Static and dynamic crushing of novel porous crochet-sintered metal and its filled composite tube	830-843
Pearce, G. M. K. / Mukkavilli, A. / Chowdhury, N. T. / Lim, S. H. / Prusty, B. G. / Crosky, A. / Kelly, D. W.	Strain Invariant Failure Theory – Part 1: An extensible framework for predicting the mechanical performance of fibre reinforced polymer composites	1022-1034
Reis, P. N. B. / Gorbatikh, L. / Ivens, J. / Lomov, S. V.	Strain-rate sensitivity and stress relaxation of hybrid self-reinforced polypropylene composites under bending loads	802-810
del Rey Castillo, Enrique / Dizhur, Dmytro / Griffith, Michael / Ingham, Jason	Strengthening RC structures using FRP spike anchors in combination with EBR systems	668-685
Martins, A. T. / Aboura, Z. / Harizi, W. / Laksimi, A. / Khellil, K.	Structural health monitoring for GFRP composite by the piezoresistive response in the tufted reinforcements	103-111
Li, M. / Khelifa, M. / Khennane, A. / Ganaoui, M. El	Structural response of cement-bonded wood composite panels as permanent formwork	13-22
Gorodtsov, Valentin A. / Lisovenko, Dmitry S.	Tension of thin two-layered plates of hexagonal crystals	453-459
Zhang, Yuxi / Wu, Dan / Chen, Ken	A theoretical model for predicting the CFRP drilling-countersinking thrust force of stacks	337-348
Wang, Xiuwu / Wei, Kai / Tao, Yong / Yang, Xujing / Zhou, Hao / He, Rujie / Fang, Daining	Thermal protection system integrating graded insulation materials and multilayer ceramic matrix composite cellular sandwich panels	523-534
Hörberg, Erik / Nyman, Tonny / Åkermo, Malin / Hallström, Stefan	Thickness effect on spring-in of prepreg composite L-profiles – An experimental study	499-507
Weng, Lin / Fan, Tongxiang / Wen, Mao / Shen, Yao	Three-dimensional multi-particle FE model and effects of interface damage, particle size and morphology on tensile behavior of particle reinforced composites	590-605
Garg, Nikhil / Karkhanis, Rahul Sanjay / Sahoo, Rosalin / Maiti, P. R. / Singh, B. N.	Trigonometric zigzag theory for static analysis of laminated composite and sandwich plates under hygro-thermo-mechanical loading	460-471
Bilotta, A. / Garcea, G.	A two-level computational approach for the elasto-plastic analysis of framed structures with composite cross-sections	192-205
Peng, Xiang / Li, Denghong / Wu, Huaping / Liu, Zhenyu / Li, Jiquan / Jiang, Shaofei / Tan, Jianrong	Uncertainty analysis of composite laminated plate with data-driven polynomial chaos expansion method under insufficient input data of uncertain parameters	625-633
Yang, Jie / Dong, Jianghui / Kitipornchai, Sritawat	Unilateral and bilateral buckling of functionally graded corrugated thin plates reinforced with graphene nanoplatelets	789-801
Bogenfeld, Raffael / Kreikemeier, Janko / Wille, Tobias	Validation of the low-velocity impact damage prediction through analytical scaling	715-726
Almuslmani, Majed / Ganesan, Rajamohan	Vibration of tapered composite driveshaft based on the hierarchical finite element analysis	905-927
Wang, Yuewu / Xie, Ke / Fu, Tairan / Shi, Congling	Vibration response of a functionally graded graphene nanoplatelet reinforced composite beam under two successive moving masses	928-939
Wu, Chao / Zhang, Li-Teng / Bai, Yu / Zhao, Xiao-Ling	Web crippling behavior of pultruded GFRP channel sections under transverse bearing load	129-142
Xu, Cai-bin / Yang, Zhi-Bo / Zhai, Zhi / Qiao, Bai-jie / Tian, Shao-hua / Chen, Xue-Feng	A weighted sparse reconstruction-based ultrasonic guided wave anomaly imaging method for composite laminates	233-241
Kappel, Erik	A zone-based approach to predict process-induced distortions of composite structures based on a ‘spring-in reference curve’	143-149

Über diese
Datenseite
IssueID
37778
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - Februar 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Februar 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.