Composite Structures - März 2020

Erschienen:	März 2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Magnucki, Krzysztof / Lewinski, Jerzy / Magnucka-Blandzi, Ewa	Bending of two-layer beams under uniformly distributed load – Analytical and numerical FEM studies	111777
Galuppi, Laura / Royer-Carfagni, Gianni	Betti’s Analytical Method for the load sharing in double glazed units	111765
Zheng, Jiliang / Li, Renfu / Zhong, Weihong / Li, Yichao	A bio-OCLC structure equating to a movable unit of a lattice cellular core for hybrid in-plane morphing applications	111762
Hauffe, A. / Hähnel, F. / Wolf, K.	Comparison of algorithms to quantify the damaged area in CFRP ultrasonic scans	111791
Lan, Guanqi / Wang, Yihong / Zeng, Guiyuan / Zhang, Jianxiong	Compressive strength of earth block masonry: Estimation based on neural networks and adaptive network-based fuzzy inference system	111731
Yazdani, Nur / Aljaafreh, Tariq / Beneberu, Eyosias	Concrete beam flexural strengthening with anchored pre-saturated CFRP laminates	111733
Kim, Hyo-Jin / Yoon, Kyungho / Lee, Phill-Seung	Continuum mechanics based beam elements for linear and nonlinear analyses of multi-layered composite beams with interlayer slips	111740
Huang, Zhixin / Zhang, Xiong	Crashworthiness and optimization design of quadruple-cell Aluminum/CFRP hybrid tubes under transverse bending	111753
Liu, Chao / Shi, Yaoyao	Design optimization for filament wound cylindrical composite internal pressure vessels considering process-induced residual stresses	111755
Zhang, J. / Eisenträger, J. / Duczek, S. / Song, C.	Discrete modeling of fiber reinforced composites using the scaled boundary finite element method	111744
Jin, Kai / Wang, Hao / Tao, Jie / Tian, Jingming	Effect of the interference fit on the stress distribution and failure mode of a flat-head riveted GLARE joint	111788
Ke, Lu / Li, Chuanxi / He, Jun / Dong, Shuai / Chen, Can / Jiao, Yang	Effects of elevated temperatures on mechanical behavior of epoxy adhesives and CFRP-steel hybrid joints	111789
Golmohammadi, A. / Tarkashvand, A. / Siahtiry, M. S.	Effects of pores different distributions on vibrational behavior of functionally graded porous cylinder applying Haar wavelet computational technique	111729
Gemi, Lokman / Morkavuk, Sezer / Köklü, Uğur / Yazman, Şakir	The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality	111737
Zhou, Tianyu / Cheng, Yuansheng / Zhao, Yanjie / Zhang, Lunping / Wang, Haikun / Chen, Ganchao / Liu, Jun / Zhang, Pan	Experimental investigation on the performance of PVC foam core sandwich panels subjected to contact underwater explosion	111796
Capozucca, R. / Magagnini, E.	Experimental response of masonry walls in-plane loading strengthened with GFRP strips	111735
Ye, Junjie / Wang, Yiwei / Li, Ziwei / Saafi, Mohamed / Jia, Fei / Huang, Bo / Ye, Jianqiao	Failure analysis of fiber-reinforced composites subjected to coupled thermo-mechanical loading	111756
Delbariani-Nejad, Ali / Farrokhabadi, Amin	A failure criterion to predict the onset of matrix cracking induced delamination in general composite laminates	111564
Ruan, Xiangjie / Lu, Chunhua / Xu, Ke / Xuan, Guangyu / Ni, Mingzhi	Flexural behavior and serviceability of concrete beams hybrid-reinforced with GFRP bars and steel bars	111772
Smarzewski, Piotr	Flexural toughness evaluation of basalt fibre reinforced HPC beams with and without initial notch	111769
French, Jordan / Dahlkamp, Chris / Czabaj, Michael	Formation of cryobiaxial-induced damage in tape-laminate composites	111816
Quan, Dong / Mischo, Chiara / Binsfeld, Lucas / Ivanković, Alojz / Murphy, Neal	Fracture behaviour of carbon fibre/epoxy composites interleaved by MWCNT- and graphene nanoplatelet-doped thermoplastic veils	111767
Wang, Changxian / Chen, Mingji / Lei, Hongshuai / Zeng, Zhihui / Yao, Kai / Yuan, Xujin / Fang, Daining	Frequency-selective-surface based sandwich structure for both effective loadbearing and customizable microwave absorption	111792
Mandegarian, Sepanta / Taheri-Behrooz, Fathollah	A general energy based fatigue failure criterion for the carbon epoxy composites	111804
Sánchez, Ezequiel D. / Nallim, Liz G. / Bellomo, Facundo J. / Oller, Sergio H.	Generalized viscoelastic model for laminated beams using hierarchical finite elements	111794
Daghia, F. / Baranger, E. / Tran, D.-T. / Pichon, P.	A hierarchy of models for the design of composite pressure vessels	111809
Mardanshahi, A. / Shokrieh, M. M. / Kazemirad, S.	Identification of matrix cracking in cross-ply laminated composites using Lamb wave propagation	111790
Sung, Minchang / Jang, Jinhyeok / Tran, Van Loi / Hong, Sung-Tae / Yu, Woong-Ryeol	Increased breaking strain of carbon fiber-reinforced plastic and steel hybrid laminate composites	111768
Stawiarski, Adam / Chwał, Małgorzata / Barski, Marek / Muc, Aleksander	The influence of the manufacturing constraints on the optimal design of laminated conical shells	111820
Li, Baosong / Zhang, Weiwei / Mei, Tianyong / Du, Shengsong / Li, Dandan / Miao, Yicheng	Influence of zirconia and ceria nanoparticles on structure and properties of electrodeposited Ni-W nanocomposites	111773
Hao, Kangda / Liao, Wei / Zhang, Tiedong / Gao, Ming	Interface formation and bonding mechanisms of laser transmission welded composite structure of PET on austenitic steel via beam oscillation	111752
Jia, Zhen-yuan / Zhang, Chong / Wang, Fu-ji / Fu, Rao / Chen, Chen	An investigation of the effects of step drill geometry on drilling induced delamination and burr of Ti/CFRP stacks	111786
Wu, Qi / Zhai, Hongzhou / Yoshikawa, Nobuhiro / Ogasawara, Tomotaka	Localization simulation of a representative volume element with prescribed displacement boundary for investigating the thermal residual stresses of composite forming	111723
Jia, Wenbin / Wen, Weidong / Fang, Lei	Low-velocity impact and post-impact biaxial residual strength tests and simulations of composite laminates	111758
Cheneler, D. / Kennedy, A. R.	Measurement and modelling of the elastic defection of novel metal syntactic foam composite sandwich structures in 3-point bending	111817
Peng, Chenxi / Tran, Phuong / Nguyen-Xuan, H. / Ferreira, A. J. M.	Mechanical performance and fatigue life prediction of lattice structures: Parametric computational approach	111821
Almutairi, Ahmed D. / Bai, Yu / Wang, Yajun / Jeske, Juri	Mechanical performance of fibre reinforced polymer confined softwood timber for pole applications	111807
Lai, W. L. / Saeedipour, H. / Goh, K. L.	Mechanical properties of low-velocity impact damaged carbon fibre reinforced polymer laminates: Effects of drilling holes for resin-injection repair	111806
Xie, Suchao / Jing, Kunkun / Zhou, Hui / Liu, Xiang	Mechanical properties of Nomex honeycomb sandwich panels under dynamic impact	111814
Dong, Liang	Mechanical responses of Ti-6Al-4V cuboctahedral truss lattice structures	111815
Garoz, D. / Hajikazemi, M. / Dinh, T. D. / Van Paepegem, W.	Mesoscale finite element analysis of cracked composite laminates under out-of-plane loads using 3D periodic boundary conditions	111699
Karamov, Radmir / Martulli, Luca M. / Kerschbaum, Martin / Sergeichev, Ivan / Swolfs, Yentl / Lomov, Stepan V.	Micro-CT based structure tensor analysis of fibre orientation in random fibre composites versus high-fidelity fibre identification methods	111818
Ansari, R. / Hassani, R. / Torabi, J.	Mixed-type formulation of higher-order shear deformation theory for vibration and buckling analysis of FG-GPLRC plates using VDQFEM	111738
Safonov, Alexander / Gusev, Mikhail / Saratov, Anton / Konstantinov, Alexander / Sergeichev, Ivan / Konev, Stepan / Gusev, Sergey / Akhatov, Iskander	Modeling of cracking during pultrusion of large-size profiles	111801
Wang, Qian / Jia, Xiaoliang	Multi-objective optimization of CFRP drilling parameters with a hybrid method integrating the ANN, NSGA-II and fuzzy C-means	111803
Sha, Ganggang / Radzieński, Maciej / Soman, Rohan / Cao, Maosen / Ostachowicz, Wieslaw / Xu, Wei	Multiple damage detection in laminated composite beams by data fusion of Teager energy operator-wavelet transform mode shapes	111798
Bhattacharyya, Rudraprasad / Basu, Prodyot K.	Multiscale progressive damage analysis of CFRP composites using a mechanics based constitutive relation	111759
Shabani, P. / Shokrieh, M. M. / Saeedi, A.	A novel model to simulate the formation and healing of cracks in self-healing cross-ply composites under flexural loading	111750
Yuan, Mingqing / Yang, Yanzhi / Zhao, Haitao / Wang, Yong / Li, Ruowei / Zhang, Boming / Chen, Ji'an	A novel trans-scale method for predicting mode I matrix crack density of composite laminates	111726
Kim, Han-Gyu / Wiebe, Richard	Numerical investigation of stress states in buckled laminated composite plates under dynamic loading	111743
Vieira, Francisco S. / Araújo, Aurélio L.	Optimization and modelling methodologies for electro-viscoelastic sandwich design for noise reduction	111778
Conde, F. M. / Coelho, P. G. / Tavares, R. P. / Rodrigues, H. C. / Guedes, J. M. / Camanho, P. P.	Optimization of the microstructure of unidirectional hybrid composites under uniaxial tensile loads	111795
Khusru, Shovona / Fawzia, Sabrina / Thambiratnam, David P. / Elchalakani, Mohamed	A parametric study: High performance double skin tubular column using rubberised concrete	111741
Chao, Xujiang / Qi, Lehua / Tian, Wenlong / Lu, Yufei / Li, Hejun	Potential of porous pyrolytic carbon for producing zero thermal expansion coefficient composites: A multi-scale numerical evaluation	111819
Kaleel, I. / Carrera, E. / Petrolo, M.	Progressive delamination of laminated composites via 1D models	111799
Li, Lin / Zhang, Zhifu / Huang, Qibai / Li, Shande	A sandwich anechoic coating embedded with a micro-perforated panel in high-viscosity condition for underwater sound absorption	111761
Li, Chunlei / Han, Qiang / Wang, Zhan	Semi-analytical isogeometric analysis for wrinkling instability of stiff films bonded to cylindrical modulus-graded compliant substrates	111787
Gürgen, Selim / Yıldız, Tolunay	Stab resistance of smart polymer coated textiles reinforced with particle additives	111812
Goldfeld, Yiska	Structural modelling of textile-reinforced concrete elements under uniaxial tensile loading	111805
Legrand, Vincent / TranVan, Luan / Casari, Pascal / Jacquemin, Frédéric	Structure-properties relationships of moisturized sandwich composite materials under extreme temperature conditions (fire resistance)	111774
Xiang, Rengjin / Pan, Zhou-Zhou / Ouyang, Hua / Zhang, Lu-Wen	A study of the vibration and lay-up optimization of rotating cross-ply laminated nanocomposite blades	111775
Heydarpour, Yasin / Malekzadeh, Parviz / Dimitri, Rossana / Tornabene, Francesco	Thermoelastic analysis of rotating multilayer FG-GPLRC truncated conical shells based on a coupled TDQM-NURBS scheme	111707
Tao, Wei / Zhu, Ping / Xu, Can / Liu, Zhao	Uncertainty quantification of mechanical properties for three-dimensional orthogonal woven composites. Part I: Stochastic reinforcement geometry reconstruction	111763
Tao, Wei / Zhu, Ping / Xu, Can / Liu, Zhao	Uncertainty quantification of mechanical properties for three-dimensional orthogonal woven composites. Part II: Multiscale simulation	111764
Al-Abtah, Fatima Ghassan / Mahdi, E. / Gowid, Samir	The use of composite to eliminate the effect of welding on the bending behavior of metallic pipes	111793
Li, Liang / Liao, Wei-Hsin / Zhang, Dingguo / Guo, Yongbin	Vibration analysis of a free moving thin plate with fully covered active constrained layer damping treatment	111742
Zu, Lei / Xu, Hui / Jia, Xiaolong / Zhang, Qian / Wang, Huabi / Zhang, Bingzhan	Winding path design based on mandrel profile updates of composite pressure vessels	111766

Über diese
Datenseite
IssueID
37753
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - März 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - März 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.