Composite Structures - April 2020

Erschienen:	April 2020

Autor(en)	Titel	Seite(n)
Mi, Yuan / Zhu, Chunling / Li, Xiaoniu / Wu, Dawei	Acoustic emission study of effect of fiber weaving on properties of fiber-resin composite materials	111906
Meng, Weiying / Li, Yupeng / Zhang, Xiaochen / Zhang, Yu / Wang, Yawen / Huang, Xiao	Analysis and prediction on total fatigue life problems of fiber reinforced metal laminates under two-stage loading	111960
Hu, Bo / Li, Yuan / Jiang, Yu-Tian / Tang, Huai-Zhong	Bond behavior of hybrid FRP-to-steel joints	111936
Attar, P. / Galos, J. / Best, A. S. / Mouritz, A. P.	Compression properties of multifunctional composite structures with embedded lithium-ion polymer batteries	111937
Bacciocchi, Michele / Tarantino, Angelo Marcello	Critical buckling load of honeycomb sandwich panels reinforced by three-phase orthotropic skins enhanced by carbon nanotubes	111904
Ma, Mingze / Yao, Weixing / Li, Piao	Critical energy release rate for interface delamination of asymmetrical specimen	111919
Hou, Zhanghao / Tian, Xiaoyong / Zhang, Junkang / Zhe, Lu / Zheng, Ziqi / Li, Dichen / Malakhov, Andrei V. / Polilov, Alexander N.	Design and 3D printing of continuous fiber reinforced heterogeneous composites	111945
Kaynan, Ozge / Yıldız, Alptekin / Bozkurt, Yunus Emre / Ozden Yenigun, Elif / Cebeci, Hulya	Electrically conductive high-performance thermoplastic filaments for fused filament fabrication	111930
Hassan, Jazib / Feser, Thomas / Waimer, Matthias / McCarthy, Conor T. / Toso, Nathalie / Byrne, Michael E. / McCarthy, Michael A.	Energy absorption capability of composite bolted joints undergoing extended bearing failure	111868
Zeinali, E. / Nazari, A. / Showkati, H.	Experimental-numerical study on lateral-torsional buckling of PFRP beams under pure bending	111925
Batra, R. C. / Pydah, Anup	Impact analysis of PEEK/ceramic/gelatin composite for finding behind the armor trauma	111863
Qi, Yunchao / Fang, Guodong / Wang, Zhangwen / Liang, Jun / Meng, Songhe	An improved analytical method for calculating stiffness of 3D needled composites with different needle-punched processes	111938
Loja, M. A. R. / Barbosa, J. I.	In-plane functionally graded plates: A study on the free vibration and dynamic instability behaviours	111905
Liu, Ning / Ren, Xiang / Lua, Jim	An isogeometric continuum shell element for modeling the nonlinear response of functionally graded material structures	111893
Yang, Yaqiang / Wang, Xin / Wu, Zhishen	Long-span cable-stayed bridge with hybrid arrangement of FRP cables	111966
Mukhopadhyay, T. / Karsh, P. K. / Basu, B. / Dey, S.	Machine learning based stochastic dynamic analysis of functionally graded shells	111870
Khakpour, H. / Ayatollahi, M. R. / Akhavan-Safar, A. / da Silva, L. F. M.	Mechanical properties of structural adhesives enhanced with natural date palm tree fibers: Effects of length, density and fiber type	111950
Mirzaali, M. J. / Herranz de la Nava, A. / Gunashekar, D. / Nouri-Goushki, M. / Veeger, R. P. E. / Grossman, Q. / Angeloni, L. / Ghatkesar, M. K. / Fratila-Apachitei, L. E. / Ruffoni, D. / Doubrovski, E. L. / Zadpoor, A. A.	Mechanics of bioinspired functionally graded soft-hard composites made by multi-material 3D printing	111867
Sabuncuoglu, Baris / Tanabi, Hamed / Soete, Jeroen / Lomov, Stepan V.	Micro-CT analysis of deviations in fiber orientation and composite stiffness near the microvascular channels embedded in glass-fiber reinforced composites	111896
Zappalorto, Michele / Carraro, Paolo Andrea / Pietrogrande, Riccardo / Quaresimin, Marino	Modelling the electrical resistance of multidirectional laminates with off-axis cracks	111928
Izzi, Michele Iacopo / Montemurro, Marco / Catapano, Anita / Pailhès, Jérôme	A multi-scale two-level optimisation strategy integrating a global/local modelling approach for composite structures	111908
Yilmaz, C. / Topal, S. / Ali, H. Q. / Tabrizi, I. E. / Al-Nadhari, A. / Suleman, A. / Yildiz, M.	Non-destructive determination of the stiffness matrix of a laminated composite structure with lamb wave	111956
Samareh-Mousavi, Seyed Sina / Taheri-Behrooz, Fathollah	A novel creep-fatigue stiffness degradation model for composite materials	111955
Zhang, Canhui / Chang, Ruijie / Li, An	Novel two-level strategy to exactly solve multilayer composite cantilever tubes of cylindrically orthotropic materials	111866
Dimitri, Rossana / Tornabene, Francesco / Reddy, Junuthula N.	Numerical study of the mixed-mode behavior of generally-shaped composite interfaces	111935
Li, Chong / Shen, Hui-Shen / Wang, Hai	Postbuckling behavior of sandwich plates with functionally graded auxetic 3D lattice core	111894
Bhuiyan, Faisal H. / Sanei, Seyed Hamid R. / Fertig, Ray S.	Predicting variability in transverse effective elastic moduli and failure initiation strengths in UD composite microstructures due to randomness in fiber location and morphology	111887
Zhou, Yingwu / Zhang, Jiaxin / Li, Weiwen / Hu, Biao / Huang, Xiaoxu	Reliability-based design analysis of FRP shear strengthened reinforced concrete beams considering different FRP configurations	111957
Rao, Zhenghua / Ou, Liang / Wang, Yaqiong / Wang, Pei-Chung	A self-piercing-through riveting method for joining of discontinuous carbon fiber reinforced nylon 6 composite	111841
Zhang, Zixiang / Liu, Airong / Yang, Jie / Pi, Yong-Lin / Huang, Yonghui / Fu, Jiyang	A theoretical and experimental study on in-plane buckling of orthotropic composite arches under an arbitrary radial point load	111933
Huang, W. / Causse, P. / Hu, H. / Belouettar, S. / Trochu, F.	Transverse compaction of 2D glass woven fabrics based on material twins – Part I: Geometric analysis	111929
Huang, W. / Causse, P. / Hu, H. / Belouettar, S. / Trochu, F.	Transverse compaction of 2D glass woven fabrics based on material twins – Part II: Tow and fabric deformations	111963
Lachaud, Frédéric / Paroissien, Eric / Michel, Laurent	Validation of a simplified analysis for the simulation of delamination of CFRP composite laminated materials under pure mode I	111897
Karamanli, Armagan / Aydogdu, Metin	Vibration of functionally graded shear and normal deformable porous microplates via finite element method	111934

Autor(en)

Titel

Seite(n)

Mi, Yuan / Zhu, Chunling / Li, Xiaoniu / Wu, Dawei

Acoustic emission study of effect of fiber weaving on properties of fiber-resin composite materials

111906

Meng, Weiying / Li, Yupeng / Zhang, Xiaochen / Zhang, Yu / Wang, Yawen / Huang, Xiao

Analysis and prediction on total fatigue life problems of fiber reinforced metal laminates under two-stage loading

111960

Hu, Bo / Li, Yuan / Jiang, Yu-Tian / Tang, Huai-Zhong

Bond behavior of hybrid FRP-to-steel joints

111936

Attar, P. / Galos, J. / Best, A. S. / Mouritz, A. P.

Compression properties of multifunctional composite structures with embedded lithium-ion polymer batteries

111937

Bacciocchi, Michele / Tarantino, Angelo Marcello

Critical buckling load of honeycomb sandwich panels reinforced by three-phase orthotropic skins enhanced by carbon nanotubes

111904

Ma, Mingze / Yao, Weixing / Li, Piao

Critical energy release rate for interface delamination of asymmetrical specimen

111919

Hou, Zhanghao / Tian, Xiaoyong / Zhang, Junkang / Zhe, Lu / Zheng, Ziqi / Li, Dichen / Malakhov, Andrei V. / Polilov, Alexander N.

Design and 3D printing of continuous fiber reinforced heterogeneous composites

111945

Kaynan, Ozge / Yıldız, Alptekin / Bozkurt, Yunus Emre / Ozden Yenigun, Elif / Cebeci, Hulya

Electrically conductive high-performance thermoplastic filaments for fused filament fabrication

111930

Hassan, Jazib / Feser, Thomas / Waimer, Matthias / McCarthy, Conor T. / Toso, Nathalie / Byrne, Michael E. / McCarthy, Michael A.

Energy absorption capability of composite bolted joints undergoing extended bearing failure

111868

Zeinali, E. / Nazari, A. / Showkati, H.

Experimental-numerical study on lateral-torsional buckling of PFRP beams under pure bending

111925

Batra, R. C. / Pydah, Anup

Impact analysis of PEEK/ceramic/gelatin composite for finding behind the armor trauma

111863

Qi, Yunchao / Fang, Guodong / Wang, Zhangwen / Liang, Jun / Meng, Songhe

An improved analytical method for calculating stiffness of 3D needled composites with different needle-punched processes

111938

Loja, M. A. R. / Barbosa, J. I.

In-plane functionally graded plates: A study on the free vibration and dynamic instability behaviours

111905

Liu, Ning / Ren, Xiang / Lua, Jim

An isogeometric continuum shell element for modeling the nonlinear response of functionally graded material structures

111893

Yang, Yaqiang / Wang, Xin / Wu, Zhishen

Long-span cable-stayed bridge with hybrid arrangement of FRP cables

111966

Mukhopadhyay, T. / Karsh, P. K. / Basu, B. / Dey, S.

Machine learning based stochastic dynamic analysis of functionally graded shells

111870

Khakpour, H. / Ayatollahi, M. R. / Akhavan-Safar, A. / da Silva, L. F. M.

Mechanical properties of structural adhesives enhanced with natural date palm tree fibers: Effects of length, density and fiber type

111950

Mirzaali, M. J. / Herranz de la Nava, A. / Gunashekar, D. / Nouri-Goushki, M. / Veeger, R. P. E. / Grossman, Q. / Angeloni, L. / Ghatkesar, M. K. / Fratila-Apachitei, L. E. / Ruffoni, D. / Doubrovski, E. L. / Zadpoor, A. A.

Mechanics of bioinspired functionally graded soft-hard composites made by multi-material 3D printing

111867

Sabuncuoglu, Baris / Tanabi, Hamed / Soete, Jeroen / Lomov, Stepan V.

Micro-CT analysis of deviations in fiber orientation and composite stiffness near the microvascular channels embedded in glass-fiber reinforced composites

111896

Zappalorto, Michele / Carraro, Paolo Andrea / Pietrogrande, Riccardo / Quaresimin, Marino

Modelling the electrical resistance of multidirectional laminates with off-axis cracks

111928

Izzi, Michele Iacopo / Montemurro, Marco / Catapano, Anita / Pailhès, Jérôme

A multi-scale two-level optimisation strategy integrating a global/local modelling approach for composite structures

111908

Yilmaz, C. / Topal, S. / Ali, H. Q. / Tabrizi, I. E. / Al-Nadhari, A. / Suleman, A. / Yildiz, M.