Composite Structures - Juni 2020

Erschienen:	Juni 2020

Autor(en)	Titel	Seite(n)
Wu, Zhihua / Zhang, Yimin / Yao, Guo	3/2 superharmonic resonance and 1/2 subharmonic resonance of functionally graded carbon nanotube reinforced composite beams	112056
Ceroni, Francesca / Darban, Hossein / Luciano, Raimondo	Analysis of bond behavior of injected anchors in masonry elements by means of Finite Element Modeling	112099
Zappino, E. / Zobeiry, N. / Petrolo, M. / Vaziri, R. / Carrera, E. / Poursartip, A.	Analysis of process-induced deformations and residual stresses in curved composite parts considering transverse shear stress and thickness stretching	112057
Lu, X. / Tan, V. B. C. / Tay, T. E.	Auxeticity of monoclinic tetrachiral honeycombs	112067
Ren, F. M. / Liang, Y. W. / Ho, J. C. M. / Lai, M. H.	Behaviour of FRP tube-concrete-encased steel composite columns	112139
Tang, Enling / He, Zhenhui / Chen, Chuang / Han, Yafei	Characterization of dynamic compressive strength and impact release energy of Al/PTFE energetic materials reinforced by aluminum honeycomb skeleton	112063
Ahmadi, H. / Hajikazemi, M. / Van Paepegem, W.	Closed-form formulae for prediction of homogenized ply-properties and laminate thermo-elastic constants in symmetric laminates containing ply cracks in multiple orientations	112061
Szeptyński, Paweł	Comparison and experimental verification of simplified one-dimensional linear elastic models of multilayer sandwich beams	112088
Nadeem Masood, S. / Viswamurthy, S. R. / Gaddikeri, Kotresh M.	Composites airframe panel design for post-buckling – An experimental investigation	112104
Lee, H. S. Jason / York, Christopher B.	Compression and shear buckling performance of finite length plates with bending-twisting coupling	112069
Banat, D. / Mania, R. J.	Damage analysis of thin-walled GLARE members under axial compression – Numerical and experiment investigations	112102
Chen, Xiangming / Sun, Xiasheng / Chen, Puhui / Chai, Yanan	A delamination failure criterion considering the effects of through-thickness compression on the interlaminar shear failure of composite laminates	112121
Trindade, Yasmin T. / Bitencourt Jr., Luís A. G. / Monte, Renata / de Figueiredo, Antonio D. / Manzoli, Osvaldo L.	Design of SFRC members aided by a multiscale model: Part I – Predicting the post-cracking parameters	112078
Trindade, Yasmin T. / Bitencourt Jr., Luís A. G. / Manzoli, Osvaldo L.	Design of SFRC members aided by a multiscale model: Part II – Predicting the behavior of RC-SFRC beams	112079
Milani, Gabriele / Fagone, Mario / Rotunno, Tommaso / Grande, Ernesto / Bertolesi, Elisa	Development of an interface numerical model for C-FRPs applied on flat and curved masonry pillars	112074
Chen, Cheng / Yang, Yancai / Yu, Jinbo / Yu, Jinming / Tan, Haizheng / Sui, Lili / Zhou, Yingwu	Eco-friendly and mechanically reliable alternative to synthetic FRP in externally bonded strengthening of RC beams: Natural FRP	112081
Mohammadabadi, Mostafa / Yadama, Vikram / Smith, Lloyd	The effect of plate theories and boundary conditions on the bending behavior of a biaxial corrugated core sandwich panel	112133
Lou, Min / Wang, Yangyang / Tong, Bing / Wang, Sen	Effect of temperature on tensile properties of reinforced thermoplastic pipes	112119
Chen, W. / Xiang, Z. Y. / Mo, J. L. / Fan, Z. Y. / Qian, H. H. / Wang, J. Y.	Energy harvesting and vibration reduction by sandwiching piezoelectric elements into elastic damping components with parallel-grooved structures	112105
Zhang, Jinhua / Chen, Li / Wu, Hao / Fang, Qin / Zhang, Yadong	Experimental and mesoscopic investigation of double-layer aluminum foam under impact loading	110859
Capozucca, R. / Magagnini, E. / Vecchietti, M. V.	Experimental static and dynamic response of RC beams damaged and strengthened with NSM GFRP rod	112100
Greco, A.	FEM analysis of the elastic behavior of composites and nanocomposites with arbitrarily oriented reinforcements	112095
Hou, Wei / Li, Zhi-qiang / Gao, Wan-Yang / Zheng, Pan-Deng / Guo, Zi-Xiong	Flexural behavior of RC beams strengthened with BFRP bars-reinforced ECC matrix	112092
Shekarchi, Mohammad / Oskouei, Asghar Vatani / Raftery, Gary M.	Flexural behavior of timber beams strengthened with pultruded glass fiber reinforced polymer profiles	112062
Barris, Cristina / Sala, Pau / Gomez, Javier / Torres, Lluis	Flexural behaviour of FRP reinforced concrete beams strengthened with NSM CFRP strips	112059
Qi, Ge / Chen, Yun-Long / Richert, Philip / Ma, Li / Schröder, Kai-Uwe	A hybrid joining insert for sandwich panels with pyramidal lattice truss cores	112123
Kanani, Armin Yousefi / Hou, Xiaonan / Ye, Jianqiao	The influence of notching and mixed-adhesives at the bonding area on the strength and stress distribution of dissimilar single-lap joints	112136
Deng, Jianchao / Wei, Xin / Zhou, Haiying / Wang, Ge / Zhang, Shuangbao	Inspiration from table tennis racket: Preparation of rubber-wood-bamboo laminated composite (RWBLC) and its response characteristics to cyclic perpendicular compressive load	112135
Pyrzowski, Łukasz / Sobczyk, Bartosz	Local and global response of sandwich beams made of GFRP facings and PET foam core in three point bending test	112122
Guo, Zherui / Chen, Weinong	A merit parameter to determine the stacking order of heterogeneous diphasic soft armor systems	112086
Shafei, Erfan / Faroughi, Shirko / Rabczuk, Timon	Multi-patch NURBS formulation for anisotropic variable angle tow composite plates	111964
Verma, Amrit Shankar / Castro, Saullo G. P. / Jiang, Zhiyu / Teuwen, Julie J. E.	Numerical investigation of rain droplet impact on offshore wind turbine blades under different rainfall conditions: A parametric study	112096
Sahu, Pruthwiraj / Sharma, Nitin / Panda, Subrata Kumar	Numerical prediction and experimental validation of free vibration responses of hybrid composite (Glass/Carbon/Kevlar) curved panel structure	112073
Ceccato, Chiara / Teng, J. G. / Cusatis, Gianluca	Numerical prediction of the ultimate condition of circular concrete columns confined with a fiber reinforced polymer jacket	112103
Han, Xiao / Akhmet, Ganiy / Hu, Ping / Hou, Wenbin / Baubekov, Yermek / Akhmetov, Mazhit	Numerical prediction on the mechanical degradation of adhesively bonded corrugated sandwich beam after hygrothermal ageing	112131
Sarker, Munawar / Hadigheh, S. Ali / Dias-da-Costa, Daniel	A performance-based characterisation of CFRP composite deterioration using active infrared thermography	112134
Deng, Jian / Hong, Zhenjun / Yin, Qiaozhi / Lu, Tian Jian	A physically-based failure analysis framework for fiber-reinforced composite laminates under multiaxial loading	112125
Kim, J. S. / Nam, I. W. / Lee, H. K.	Piezoelectric characteristics of urethane composites incorporating piezoelectric nanomaterials	112072
Dong, Wenkui / Li, Wengui / Shen, Luming / Sun, Zhihui / Sheng, Daichao	Piezoresistivity of smart carbon nanotubes (CNTs) reinforced cementitious composite under integrated cyclic compression and impact	112106
Sokołowski, Damian / Kamiński, Marcin	Probabilistic homogenization of hyper-elastic particulate composites with random interface	112118
Zhou, Xiang / Shui, Guoshuang	Propagation of transient elastic waves in multilayered composite structure subjected to dynamic anti-plane loading with thermal effects	112098
Dölling, S. / Hahn, J. / Felger, J. / Bremm, S. / Becker, W.	A scaled boundary finite element method model for interlaminar failure in composite laminates	111865
Yang, Xu / Gao, Wan-Yang / Dai, Jian-Guo / Lu, Zhou-Dao	Shear strengthening of RC beams with FRP grid-reinforced ECC matrix	112120
Zhou, Chao-Yang / Yu, Ya-Nan / Xie, En-Li	Strengthening RC beams using externally bonded CFRP sheets with end self-locking	112070
Aditya, S. / Haboussi, M. / Shubhendu, S. / Ganapathi, M. / Polit, O.	Supersonic flutter study of porous 2D curved panels reinforced with graphene platelets using an accurate shear deformable finite element procedure	112058
Guo, Cong / He, Ji / Su, Youhuang / Li, Shuhui	Thermo-stamping co-curing process for CFRP/steel hybrid sheets and its interface strength improvement	112108
Postek, Eligiusz / Sadowski, Tomasz	Thermomechanical effects during impact testing of WC/Co composite material	112054
Zhang, Pengchong / Qi, Chengzhi / Fang, Hongyuan / He, Wei	Three dimensional mechanical behaviors of in-plane functionally graded plates	112124
Huang, Z. W. / Xing, Y. F. / Gao, Y. H.	A two-scale asymptotic expansion method for periodic composite Euler beams	112033
Sun, Zeyu / Xiao, Jie / Yu, Xuduo / Tusiime, Rogers / Gao, Hongping / Min, Wei / Tao, Lei / Qi, Liangliang / Zhang, Hui / Yu, Muhuo	Vibration characteristics of carbon-fiber reinforced composite drive shafts fabricated using filament winding technology	111725

Autor(en)

Titel

Seite(n)

Wu, Zhihua / Zhang, Yimin / Yao, Guo

3/2 superharmonic resonance and 1/2 subharmonic resonance of functionally graded carbon nanotube reinforced composite beams

112056

Ceroni, Francesca / Darban, Hossein / Luciano, Raimondo

Analysis of bond behavior of injected anchors in masonry elements by means of Finite Element Modeling

112099

Zappino, E. / Zobeiry, N. / Petrolo, M. / Vaziri, R. / Carrera, E. / Poursartip, A.

Analysis of process-induced deformations and residual stresses in curved composite parts considering transverse shear stress and thickness stretching

112057

Lu, X. / Tan, V. B. C. / Tay, T. E.

Auxeticity of monoclinic tetrachiral honeycombs

112067

Ren, F. M. / Liang, Y. W. / Ho, J. C. M. / Lai, M. H.

Behaviour of FRP tube-concrete-encased steel composite columns

112139

Tang, Enling / He, Zhenhui / Chen, Chuang / Han, Yafei

Characterization of dynamic compressive strength and impact release energy of Al/PTFE energetic materials reinforced by aluminum honeycomb skeleton

112063

Ahmadi, H. / Hajikazemi, M. / Van Paepegem, W.

Closed-form formulae for prediction of homogenized ply-properties and laminate thermo-elastic constants in symmetric laminates containing ply cracks in multiple orientations

112061

Szeptyński, Paweł

Comparison and experimental verification of simplified one-dimensional linear elastic models of multilayer sandwich beams

112088

Nadeem Masood, S. / Viswamurthy, S. R. / Gaddikeri, Kotresh M.

Composites airframe panel design for post-buckling – An experimental investigation

112104

Lee, H. S. Jason / York, Christopher B.

Compression and shear buckling performance of finite length plates with bending-twisting coupling

112069

Banat, D. / Mania, R. J.

Damage analysis of thin-walled GLARE members under axial compression – Numerical and experiment investigations

112102

Chen, Xiangming / Sun, Xiasheng / Chen, Puhui / Chai, Yanan

A delamination failure criterion considering the effects of through-thickness compression on the interlaminar shear failure of composite laminates

112121

Trindade, Yasmin T. / Bitencourt Jr., Luís A. G. / Monte, Renata / de Figueiredo, Antonio D. / Manzoli, Osvaldo L.

Design of SFRC members aided by a multiscale model: Part I – Predicting the post-cracking parameters

112078

Trindade, Yasmin T. / Bitencourt Jr., Luís A. G. / Manzoli, Osvaldo L.

Design of SFRC members aided by a multiscale model: Part II – Predicting the behavior of RC-SFRC beams

112079

Milani, Gabriele / Fagone, Mario / Rotunno, Tommaso / Grande, Ernesto / Bertolesi, Elisa

Development of an interface numerical model for C-FRPs applied on flat and curved masonry pillars

112074

Chen, Cheng / Yang, Yancai / Yu, Jinbo / Yu, Jinming / Tan, Haizheng / Sui, Lili / Zhou, Yingwu

Eco-friendly and mechanically reliable alternative to synthetic FRP in externally bonded strengthening of RC beams: Natural FRP

112081

Mohammadabadi, Mostafa / Yadama, Vikram / Smith, Lloyd

The effect of plate theories and boundary conditions on the bending behavior of a biaxial corrugated core sandwich panel

112133

Lou, Min / Wang, Yangyang / Tong, Bing / Wang, Sen

Effect of temperature on tensile properties of reinforced thermoplastic pipes

112119

Chen, W. / Xiang, Z. Y. / Mo, J. L. / Fan, Z. Y. / Qian, H. H. / Wang, J. Y.

Energy harvesting and vibration reduction by sandwiching piezoelectric elements into elastic damping components with parallel-grooved structures

112105

Zhang, Jinhua / Chen, Li / Wu, Hao / Fang, Qin / Zhang, Yadong

Experimental and mesoscopic investigation of double-layer aluminum foam under impact loading

110859

Capozucca, R. / Magagnini, E. / Vecchietti, M. V.

Experimental static and dynamic response of RC beams damaged and strengthened with NSM GFRP rod

112100

Greco, A.

FEM analysis of the elastic behavior of composites and nanocomposites with arbitrarily oriented reinforcements

112095

Hou, Wei / Li, Zhi-qiang / Gao, Wan-Yang / Zheng, Pan-Deng / Guo, Zi-Xiong

Flexural behavior of RC beams strengthened with BFRP bars-reinforced ECC matrix

112092

Shekarchi, Mohammad / Oskouei, Asghar Vatani / Raftery, Gary M.

Flexural behavior of timber beams strengthened with pultruded glass fiber reinforced polymer profiles

112062

Barris, Cristina / Sala, Pau / Gomez, Javier / Torres, Lluis

Flexural behaviour of FRP reinforced concrete beams strengthened with NSM CFRP strips

112059

Qi, Ge / Chen, Yun-Long / Richert, Philip / Ma, Li / Schröder, Kai-Uwe

A hybrid joining insert for sandwich panels with pyramidal lattice truss cores

112123

Kanani, Armin Yousefi / Hou, Xiaonan / Ye, Jianqiao

The influence of notching and mixed-adhesives at the bonding area on the strength and stress distribution of dissimilar single-lap joints

112136

Deng, Jianchao / Wei, Xin / Zhou, Haiying / Wang, Ge / Zhang, Shuangbao

Inspiration from table tennis racket: Preparation of rubber-wood-bamboo laminated composite (RWBLC) and its response characteristics to cyclic perpendicular compressive load

112135

Pyrzowski, Łukasz / Sobczyk, Bartosz

Local and global response of sandwich beams made of GFRP facings and PET foam core in three point bending test

112122

Guo, Zherui / Chen, Weinong

A merit parameter to determine the stacking order of heterogeneous diphasic soft armor systems

112086

Shafei, Erfan / Faroughi, Shirko / Rabczuk, Timon

Multi-patch NURBS formulation for anisotropic variable angle tow composite plates

111964

Verma, Amrit Shankar / Castro, Saullo G. P. / Jiang, Zhiyu / Teuwen, Julie J. E.

Numerical investigation of rain droplet impact on offshore wind turbine blades under different rainfall conditions: A parametric study

112096

Sahu, Pruthwiraj / Sharma, Nitin / Panda, Subrata Kumar

Numerical prediction and experimental validation of free vibration responses of hybrid composite (Glass/Carbon/Kevlar) curved panel structure

112073

Ceccato, Chiara / Teng, J. G. / Cusatis, Gianluca

Numerical prediction of the ultimate condition of circular concrete columns confined with a fiber reinforced polymer jacket

112103

Han, Xiao / Akhmet, Ganiy / Hu, Ping / Hou, Wenbin / Baubekov, Yermek / Akhmetov, Mazhit

Numerical prediction on the mechanical degradation of adhesively bonded corrugated sandwich beam after hygrothermal ageing

112131

Sarker, Munawar / Hadigheh, S. Ali / Dias-da-Costa, Daniel

A performance-based characterisation of CFRP composite deterioration using active infrared thermography

112134

Deng, Jian / Hong, Zhenjun / Yin, Qiaozhi / Lu, Tian Jian

A physically-based failure analysis framework for fiber-reinforced composite laminates under multiaxial loading

112125

Kim, J. S. / Nam, I. W. / Lee, H. K.

Piezoelectric characteristics of urethane composites incorporating piezoelectric nanomaterials

112072

Dong, Wenkui / Li, Wengui / Shen, Luming / Sun, Zhihui / Sheng, Daichao

Piezoresistivity of smart carbon nanotubes (CNTs) reinforced cementitious composite under integrated cyclic compression and impact

112106

Sokołowski, Damian / Kamiński, Marcin

Probabilistic homogenization of hyper-elastic particulate composites with random interface

112118

Zhou, Xiang / Shui, Guoshuang

Propagation of transient elastic waves in multilayered composite structure subjected to dynamic anti-plane loading with thermal effects

112098

Dölling, S. / Hahn, J. / Felger, J. / Bremm, S. / Becker, W.

A scaled boundary finite element method model for interlaminar failure in composite laminates

111865

Yang, Xu / Gao, Wan-Yang / Dai, Jian-Guo / Lu, Zhou-Dao

Shear strengthening of RC beams with FRP grid-reinforced ECC matrix

112120

Zhou, Chao-Yang / Yu, Ya-Nan / Xie, En-Li

Strengthening RC beams using externally bonded CFRP sheets with end self-locking

112070

Aditya, S. / Haboussi, M. / Shubhendu, S. / Ganapathi, M. / Polit, O.

Supersonic flutter study of porous 2D curved panels reinforced with graphene platelets using an accurate shear deformable finite element procedure

112058

Guo, Cong / He, Ji / Su, Youhuang / Li, Shuhui

Thermo-stamping co-curing process for CFRP/steel hybrid sheets and its interface strength improvement

112108

Postek, Eligiusz / Sadowski, Tomasz

Thermomechanical effects during impact testing of WC/Co composite material

112054

Zhang, Pengchong / Qi, Chengzhi / Fang, Hongyuan / He, Wei

Three dimensional mechanical behaviors of in-plane functionally graded plates

112124

Huang, Z. W. / Xing, Y. F. / Gao, Y. H.

A two-scale asymptotic expansion method for periodic composite Euler beams

112033

Sun, Zeyu / Xiao, Jie / Yu, Xuduo / Tusiime, Rogers / Gao, Hongping / Min, Wei / Tao, Lei / Qi, Liangliang / Zhang, Hui / Yu, Muhuo

Vibration characteristics of carbon-fiber reinforced composite drive shafts fabricated using filament winding technology

111725

Anzeige

Composite Structures - Juni 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - Juni 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.