Composite Structures - September 2020

Erschienen:	September 2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Arjunan, Arun / Singh, Manpreet / Baroutaji, Ahmad / Wang, Chang	Additively manufactured AlSi10Mg inherently stable thin and thick-walled lattice with negative Poisson’s ratio	112469
Arefi, Mohammad / Firouzeh, Saeed / Mohammad-Rezaei Bidgoli, Elyas / Civalek, Ömer	Analysis of porous micro-plates reinforced with FG-GNPs based on Reddy plate theory	112391
Huang, Liping / Zeng, Liang / Lin, Jing / Zhang, Nan	Baseline-free damage detection in composite plates using edge-reflected Lamb waves	112423
Qureshi, Jawed / Nadir, Yashida / John, Shaise K.	Bolted and bonded FRP beam-column joints with semi-rigid end conditions	112500
Zhu, Zhipeng / Yang, Peng / Xia, Fei / Jin, Fusong / Liang, Haofeng / He, Zanhang / Xue, Jianghong	Buckling of composite laminates with multiple delaminations: Part II experiments	112498
Almeida-Fernandes, Lourenço / Silvestre, Nuno / Correia, João R. / Arruda, Mário	Compressive transverse fracture behaviour of pultruded GFRP materials: Experimental study and numerical calibration	112453
Lolić, Damjan / Zupan, Dejan / Brojan, Miha	A consistent finite element formulation for laminated composites with nonlinear interlaminar constitutive law	112445
Han, WenQin / Hu, KeJun / Shi, Qinghe / Zhu, FuXian	Damage evolution analysis of open-hole tensile laminated composites using a progress damage model verified by AE and DIC	112452
Muc, A. / Stawiarski, A. / Chwał, M.	Design of the hybrid FRP/concrete structures for bridge constructions	112490
Choi, Eunsoo / Kim, Hee Sun / Nam, Tae-hyun	Effect of crimped SMA fiber geometry on recovery stress and pullout resistance	112466
Galvez, Pedro / Lopez de Armentia, Sara / Abenojar, Juana / Martínez, Miguel Ángel	Effect of moisture and temperature on thermal and mechanical properties of structural polyurethane adhesive joints	112443
Ma, Gao / Chen, Xiaohuang / Yan, Libo / Hwang, Hyeon-Jong	Effect of pre-damage on compressive properties of circular RC columns repaired with BFRP composites: Testing and modeling	112483
Sun, Wei / Liu, Shukui / Zhang, Chunyang	An effective improvement for enhancing the strength and feasibility of FRP spike anchors	112449
Feser, Thomas / Hassan, Jazib / Waimer, Matthias / McCarthy, Conor T. / Toso, Nathalie / Voggenreiter, Heinz / McCarthy, Michael A.	Effects of transient dynamic loading on the energy absorption capability of composite bolted joints undergoing extended bearing failure	112476
Nebe, M. / Asijee, T. J. / Braun, C. / van Campen, J. M. J. F. / Walther, F.	Experimental and analytical analysis on the stacking sequence of composite pressure vessels	112429
Nachtane, M. / Tarfaoui, M. / Ledoux, Y. / Khammassi, S. / Leneveu, E. / Pelleter, J.	Experimental investigation on the dynamic behavior of 3D printed CF-PEKK composite under cyclic uniaxial compression	112474
Liao, Binbin / Jia, Liyong / Zhou, Jianwu / Lei, Hongshuai / Gao, Ruxin / Lin, Yuan / Fang, Daining	An explicit–implicit combined model for predicting residual strength of composite cylinders subjected to low velocity impact	112450
Wei, Zhiquan / Xu, Xianghong	FEM simulation on impact resistance of surface gradient and periodic layered bionic composites	112428
Sharaky, I. A. / Mohamed, Heba A. / Torres, L. / Emara, Mohamed	Flexural behavior of rubberized concrete beams strengthened in shear using welded wire mesh	112485
Wang, Shaoqing / Zhang, Junling / Li, Qiang / Su, Jianmin / Liang, Sen	Free vibration of co-cured composite structures with different numbers of viscoelastic damping membranes	112434
Xie, Yuming / Huang, Yongxian / Meng, Xiangchen / Wang, Feifan / Wan, Long / Dong, Zhibo / Cao, Jian	Friction rivet joining towards high-performance wood-metal hybrid structures	112472
Fotouhi, Mohamad / Jalalvand, Meisam / Saeedifar, Milad / Xiao, Bill / Wisnom, Michael R.	High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour loaded off-axis	112444
Teter, Andrzej / Kolakowski, Zbigniew / Jankowski, Jacek	How to determine a value of the bifurcation shortening of real thin-walled laminated columns subjected to uniform compression?	112430
Gupta, Abhay / Panda, Satyajit / Reddy, Rajidi Shashidhar	Improved damping in sandwich beams through the inclusion of dispersed graphite particles within the viscoelastic core	112424
Herráez, M. / Pichler, N. / Botsis, J.	Improving delamination resistance through tailored defects	112422
Wu, Xin / Su, Yutai / Shi, Jing	In-plane impact resistance enhancement with a graded cell-wall angle design for auxetic metamaterials	112451
Meng, Liang / Qiu, Xueying / Gao, Tong / Li, Zhengyang / Zhang, Weihong	An inverse approach to the accurate modelling of 3D-printed sandwich panels with lattice core using beams of variable cross-section	112363
Ahmad Basri, Ahmad Burhani / Chae, Dong Wook / Lee, Hyeongill	Investigation of the dynamic characteristics of a carbon-fiber-reinforced epoxy with adhesive-jointed structure	112499
Wang, Bing / Fang, Guodong / Tan, Xiaojun / Liang, Jun / Ge, Jingran / Liu, Shuo	Investigation on the longitudinal compressive strength of unidirectional carbon fiber/nanoparticles reinforced polymer composites using FFT-based method	112448
Qin, Bin / Zhong, Rui / Wang, Qingshan / Zhao, Xing	A Jacobi-Ritz approach for FGP beams with arbitrary boundary conditions based on a higher-order shear deformation theory	112435
Ecault, Romain / Touchard, Fabienne / Berthe, Laurent / Boustie, Michel	Laser shock adhesion test numerical optimization for composite bonding assessment	112441
Kumar, Dhiraj / Gururaja, Suhasini	Machining damage and surface integrity evaluation during milling of UD-CFRP laminates: Dry vs. cryogenic	112504
Beesetty, Pavan / kale, Aditya / Patil, Balu / Doddamani, Mrityunjay	Mechanical behavior of additively manufactured nanoclay/HDPE nanocomposites	112442
Audoux, Yohann / Montemurro, Marco / Pailhès, Jérôme	A Metamodel Based on Non-Uniform Rational Basis Spline Hyper-Surfaces for Optimisation of Composite Structures	112439
Araujo, A. L. / Madeira, J. F. A.	Multiobjective optimization solutions for noise reduction in composite sandwich panels using active control	112440
Yu, Haidong / Zhao, Zijie / Yang, Dan / Gao, Chang	A new composite plate/plate element for stiffened plate structures via absolute nodal coordinate formulation	112431
Babaei, Hadi / Reza Eslami, M.	On nonlinear vibration and snap-through stability of porous FG curved micro-tubes using two-step perturbation technique	112447
Liang, Chen / Wang, Yan Qing	A quasi-3D trigonometric shear deformation theory for wave propagation analysis of FGM sandwich plates with porosities resting on viscoelastic foundation	112478
Han, Qigang / Qin, Hanlin / Han, Zhiwu / Zhang, Junqiu / Niu, Shichao / Sun, Yanbiao / Shi, Shaoqian	Study on mechanical properties of multi-structure dactyl-inspired sandwich honeycomb with basalt fiber	112467
Nokhbatolfoghahai, A. / Navazi, H. M. / Groves, R. M.	Using the hybrid DAS-SR method for damage localization in composite plates	112420

Über diese
Datenseite
IssueID
37739
Veröffentlicht am:
23.10.2020
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Composite Structures - September 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Composite Structures - September 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.