Case Studies in Construction Materials - Dezember 2018

Erschienen:	Dezember 2018

Autor(en)	Titel	Seite(n)
Oluwatuyi, Opeyemi E. / Adeola, Bamidele O. / Alhassan, Elijah A. / Nnochiri, Emeka S. / Modupe, Abayomi E. / Elemile, Olugbenga O. / Obayanju, Temidayo / Akerele, Grace	Ameliorating effect of milled eggshell on cement stabilized lateritic soil for highway construction	e00191
Atoyebi, Olumoyewa D. / Awolusi, Temitope F. / Davies, Iyinoluwa E. E.	Artificial neural network evaluation of cement-bonded particle board produced from red iron wood (Lophira alata) sawdust and palm kernel shell residues	e00185
Ibrahim, Yasser E.	Assessment of a cracked reinforced concrete beam: Case study	e00179
Al-Rousan, Rajai Z. / Alhassan, Mohammad A. / AlShuqari, Esmail A.	Behavior of plain concrete beams with DSSF strengthened in flexure with anchored CFRP sheets—Effects of DSSF content on the bonding length of CFRP sheets	e00195
Patel, Malay Mayank / Clevenger, Caroline M. / Abdallah, Moatassem	Carbon nano-tube as water reducer in CDOT Class E 12 hr concrete mix	e00207
Faramarzi, Masoud / Lee, K. Wayne / Kim, Yongjoo / Kwon, Sooahn	A case study on a cement treated RAP containing asphalt emulsion and acryl polymer	e00211
Ashteyat, Ahmed M. / Haddad, Rami H. / Obaidat, Yasmeen T.	Case study on production of self compacting concrete using white cement by pass dust	e00190
Syarif, Muhammad / Sampebulu', Victor / Wihardi Tjaronge, M.	Characteristic of compressive and tensile strength using the organic cement compare with portland cement	e00172
Friedrich, Daniel	Comparative study on artificial and natural weathering of wood-polymer compounds: A comprehensive literature review	e00196
Nadir, Wissam / Dhahir, Mohammed K. / Naser, Fatimah H.	A compression field based model to assess the shear strength of concrete slender beams without web reinforcement	e00210
Soutsos, M. / Kanavaris, F. / Hatzitheodorou, A.	Critical analysis of strength estimates from maturity functions	e00183
Loganina, Valentina Ivanovna / Kislitsyna, Svetlana Nikolaevna / Mazhitov, Yerkebulan Bisengalievich	Development of sol-silicate composition for decoration of building walls	e00173
Amor, F. / Diouri, A. / Ellouzi, I. / Ouanji, F.	Development of Zn-Al-Ti mixed oxides-modified cement phases for surface photocatalytic performance	e00209
Chindaprasirt, Prinya / Phoo-ngernkham, Tanakorn / Hanjitsuwan, Sakonwan / Horpibulsuk, Suksun / Poowancum, Anurat / Injorhor, Borwonrak	Effect of calcium-rich compounds on setting time and strength development of alkali-activated fly ash cured at ambient temperature	e00198
Taktak, Wissem / Daoud, Wissem	Effect of steel hanger height on its members’ internal forces due to wind loads: comparison between standards EN1991-1-4 and NV65	e00189
Ashrafi, Hamid Reza / Beiranvand, Peyman / Pouraminian, Majid / Moayeri, Marziye Sadat	Examining the impact of sheet placement and changes in waves characteristics on behavior of wavy steel shear wall	e00180
Abid, Sallal R. / Nahhab, Ali H. / Al-aayedi, Husam K. H. / Nuhair, Athraa M.	Expansion and strength properties of concrete containing contaminated recycled concrete aggregate	e00201
Ghahremannejad, Masoud / Mahdavi, Maziar / Saleh, Arash Emami / Abhaee, Sina / Abolmaali, Ali	Experimental investigation and identification of single and multiple cracks in synthetic fiber concrete beams	e00182
Raphael, Wassim / Zgheib, Elise / Chateauneuf, Alaa	Experimental investigations and sensitivity analysis to explain the large creep of concrete deformations in the bridge of Cheviré	e00176
Al-Kamaki, Yaman Sami Shareef / Hassan, Gulan Bapeer / Alsofi, Gehan	Experimental study of the behaviour of RC corbels strengthened with CFRP sheets	e00181
Samali, Bijan / Nemati, Saeed / Sharafi, Phezhman / Abtahi, Mojtaba / Aliabadizadeh, Yahya	An experimental study on the lateral pressure in foam-filled wall panels with pneumatic formwork	e00203
Shaaban, Ibrahim G. / Shaheen, Yousry B. I. / Elsayed, Essam L. / Kamal, Osama A. / Adesina, Peter A.	Flexural behaviour and theoretical prediction of lightweight ferrocement composite beams	e00204
Udawattha, Chameera / Halwatura, Rangika	Geopolymerized self-compacting mud concrete masonry units	e00177
Kubba, Ziyad / Huseien, Ghasan Fahim / Sam, Abdul Rahman Mohd / Shah, Kwok Wei / Asaad, Mohammad Ali / Ismail, Mohammad / Tahir, Mahmood Md. / Mirza, Jahangir	Impact of curing temperatures and alkaline activators on compressive strength and porosity of ternary blended geopolymer mortars	e00205
Oyola-Guzmán, Romer D. / Oyola-Morales, Rómulo	Implementing a fast, practical, and rational quality control technique at a soil mixture production plant, based on a continuous and quantitative classification of materials: A case study	e00199
Hossiney, Nabil / Das, Pranab / Mohan, Mothi Krishna / George, Jaison	In-plant production of bricks containing waste foundry sand—A study with Belgaum foundry industry	e00170
Sabău, Marian / Ayala Rueda, Claudia Ines / Salas Barraza, Jose Fernando / Núñez Vivas, Jholman Elifás / Cardona Almeida, César Antonio	The incidence of alternative minimum load values in masonry partition and lightweight partition systems with a cost analysis in Barranquilla, Colombia	e00194
Rohden, Abrahão Bernardo / Garcez, Mônica Regina	Increasing the sustainability potential of a reinforced concrete building through design strategies: Case study	e00174
Titi, Hani H. / Dakwar, Mahmoud / Sooman, Mohammad / Tabatabai, Habib	Long term performance of gravel base course layers in asphalt pavements	e00208
Soutsos, Marios / Kanavaris, Fragkoulis	The modified nurse-saul (MNS) maturity function for improved strength estimates at elevated curing temperatures	e00206
Meng, Xi / Huang, Yuqiu / Cao, Ying / Gao, Yanna / Hou, Chaoping / Zhang, Lili / Shen, Qiong	Optimization of the wall thermal insulation characteristics based on the intermittent heating operation	e00188
Martínez-López, Miguel / Martínez-Barrera, Gonzalo / del Coz-Diaz, Juan Jose / Martínez-Martínez, Juan Enrique / Gencel, Osman / Ribeiro, Maria C. S. / Varela-Guerrero, Víctor	Polymer waste materials as fillers in polymer mortars: experimental and finite elements simulation	e00178
Zhao, Zhiping / Fu, Lei	The probability distribution of pitting for accelerated corrosion reinforcement	e00193
Gerges, Najib N. / Issa, Camille A. / Fawaz, Samer A.	Rubber concrete: Mechanical and dynamical properties	e00184
Ibrahim, Yasser E.	Seismic risk analysis of multistory reinforced concrete structures in Saudi Arabia	e00192
Sadeghian, Pedram / Fillmore, Brandon	Strain distribution of basalt FRP-wrapped concrete cylinders	e00171
Hamad, Bilal S. / Dawi, Ali H. / Daou, Anas / Chehab, Ghassan R.	Studies of the effect of recycled aggregates on flexural, shear, and bond splitting beam structural behavior	e00186
Platt, Shawn / Harries, Kent A.	Study of galvanic corrosion potential of NSM titanium reinforcing bars	e00175
Mahmoudkelaye, Samira / Taghizade Azari, Katayoon / Pourvaziri, Mitra / Asadian, Elnaz	Sustainable material selection for building enclosure through ANP method	e00200
Bahedh, Mustafa Azeez / Jaafar, Mohd Saleh	Ultra high-performance concrete utilizing fly ash as cement replacement under autoclaving technique	e00202
Azmee, N. M. / Shafiq, N.	Ultra-high performance concrete: From fundamental to applications	e00197
Fadele, O. A. / Ata, O.	Water absorption properties of sawdust lignin stabilised compressed laterite bricks	e00187

Autor(en)

Titel

Seite(n)

Oluwatuyi, Opeyemi E. / Adeola, Bamidele O. / Alhassan, Elijah A. / Nnochiri, Emeka S. / Modupe, Abayomi E. / Elemile, Olugbenga O. / Obayanju, Temidayo / Akerele, Grace

Ameliorating effect of milled eggshell on cement stabilized lateritic soil for highway construction

e00191

Atoyebi, Olumoyewa D. / Awolusi, Temitope F. / Davies, Iyinoluwa E. E.

Artificial neural network evaluation of cement-bonded particle board produced from red iron wood (Lophira alata) sawdust and palm kernel shell residues

e00185

Ibrahim, Yasser E.

Assessment of a cracked reinforced concrete beam: Case study

e00179

Al-Rousan, Rajai Z. / Alhassan, Mohammad A. / AlShuqari, Esmail A.

Behavior of plain concrete beams with DSSF strengthened in flexure with anchored CFRP sheets—Effects of DSSF content on the bonding length of CFRP sheets

e00195

Patel, Malay Mayank / Clevenger, Caroline M. / Abdallah, Moatassem

Carbon nano-tube as water reducer in CDOT Class E 12 hr concrete mix

e00207

Faramarzi, Masoud / Lee, K. Wayne / Kim, Yongjoo / Kwon, Sooahn

A case study on a cement treated RAP containing asphalt emulsion and acryl polymer

e00211

Ashteyat, Ahmed M. / Haddad, Rami H. / Obaidat, Yasmeen T.

Case study on production of self compacting concrete using white cement by pass dust

e00190

Syarif, Muhammad / Sampebulu', Victor / Wihardi Tjaronge, M.

Characteristic of compressive and tensile strength using the organic cement compare with portland cement

e00172

Friedrich, Daniel

Comparative study on artificial and natural weathering of wood-polymer compounds: A comprehensive literature review

e00196

Nadir, Wissam / Dhahir, Mohammed K. / Naser, Fatimah H.

A compression field based model to assess the shear strength of concrete slender beams without web reinforcement

e00210

Soutsos, M. / Kanavaris, F. / Hatzitheodorou, A.

Critical analysis of strength estimates from maturity functions

e00183

Loganina, Valentina Ivanovna / Kislitsyna, Svetlana Nikolaevna / Mazhitov, Yerkebulan Bisengalievich

Development of sol-silicate composition for decoration of building walls

e00173

Amor, F. / Diouri, A. / Ellouzi, I. / Ouanji, F.

Development of Zn-Al-Ti mixed oxides-modified cement phases for surface photocatalytic performance

e00209

Chindaprasirt, Prinya / Phoo-ngernkham, Tanakorn / Hanjitsuwan, Sakonwan / Horpibulsuk, Suksun / Poowancum, Anurat / Injorhor, Borwonrak

Effect of calcium-rich compounds on setting time and strength development of alkali-activated fly ash cured at ambient temperature

e00198

Taktak, Wissem / Daoud, Wissem

Effect of steel hanger height on its members’ internal forces due to wind loads: comparison between standards EN1991-1-4 and NV65

e00189

Ashrafi, Hamid Reza / Beiranvand, Peyman / Pouraminian, Majid / Moayeri, Marziye Sadat

Examining the impact of sheet placement and changes in waves characteristics on behavior of wavy steel shear wall

e00180

Abid, Sallal R. / Nahhab, Ali H. / Al-aayedi, Husam K. H. / Nuhair, Athraa M.

Expansion and strength properties of concrete containing contaminated recycled concrete aggregate

e00201

Ghahremannejad, Masoud / Mahdavi, Maziar / Saleh, Arash Emami / Abhaee, Sina / Abolmaali, Ali

Experimental investigation and identification of single and multiple cracks in synthetic fiber concrete beams

e00182

Raphael, Wassim / Zgheib, Elise / Chateauneuf, Alaa

Experimental investigations and sensitivity analysis to explain the large creep of concrete deformations in the bridge of Cheviré

e00176

Al-Kamaki, Yaman Sami Shareef / Hassan, Gulan Bapeer / Alsofi, Gehan

Experimental study of the behaviour of RC corbels strengthened with CFRP sheets

e00181

Samali, Bijan / Nemati, Saeed / Sharafi, Phezhman / Abtahi, Mojtaba / Aliabadizadeh, Yahya

An experimental study on the lateral pressure in foam-filled wall panels with pneumatic formwork

e00203

Shaaban, Ibrahim G. / Shaheen, Yousry B. I. / Elsayed, Essam L. / Kamal, Osama A. / Adesina, Peter A.

Flexural behaviour and theoretical prediction of lightweight ferrocement composite beams

e00204

Udawattha, Chameera / Halwatura, Rangika

Geopolymerized self-compacting mud concrete masonry units

e00177

Kubba, Ziyad / Huseien, Ghasan Fahim / Sam, Abdul Rahman Mohd / Shah, Kwok Wei / Asaad, Mohammad Ali / Ismail, Mohammad / Tahir, Mahmood Md. / Mirza, Jahangir

Impact of curing temperatures and alkaline activators on compressive strength and porosity of ternary blended geopolymer mortars

e00205

Oyola-Guzmán, Romer D. / Oyola-Morales, Rómulo

Implementing a fast, practical, and rational quality control technique at a soil mixture production plant, based on a continuous and quantitative classification of materials: A case study

e00199

Hossiney, Nabil / Das, Pranab / Mohan, Mothi Krishna / George, Jaison

In-plant production of bricks containing waste foundry sand—A study with Belgaum foundry industry

e00170

Sabău, Marian / Ayala Rueda, Claudia Ines / Salas Barraza, Jose Fernando / Núñez Vivas, Jholman Elifás / Cardona Almeida, César Antonio

The incidence of alternative minimum load values in masonry partition and lightweight partition systems with a cost analysis in Barranquilla, Colombia

e00194

Rohden, Abrahão Bernardo / Garcez, Mônica Regina

Increasing the sustainability potential of a reinforced concrete building through design strategies: Case study

e00174

Titi, Hani H. / Dakwar, Mahmoud / Sooman, Mohammad / Tabatabai, Habib

Long term performance of gravel base course layers in asphalt pavements

e00208

Soutsos, Marios / Kanavaris, Fragkoulis

The modified nurse-saul (MNS) maturity function for improved strength estimates at elevated curing temperatures

e00206

Meng, Xi / Huang, Yuqiu / Cao, Ying / Gao, Yanna / Hou, Chaoping / Zhang, Lili / Shen, Qiong

Optimization of the wall thermal insulation characteristics based on the intermittent heating operation

e00188

Martínez-López, Miguel / Martínez-Barrera, Gonzalo / del Coz-Diaz, Juan Jose / Martínez-Martínez, Juan Enrique / Gencel, Osman / Ribeiro, Maria C. S. / Varela-Guerrero, Víctor

Polymer waste materials as fillers in polymer mortars: experimental and finite elements simulation

e00178

Zhao, Zhiping / Fu, Lei

The probability distribution of pitting for accelerated corrosion reinforcement

e00193

Gerges, Najib N. / Issa, Camille A. / Fawaz, Samer A.

Rubber concrete: Mechanical and dynamical properties

e00184

Ibrahim, Yasser E.

Seismic risk analysis of multistory reinforced concrete structures in Saudi Arabia

e00192

Sadeghian, Pedram / Fillmore, Brandon