Advances in Civil Engineering Materials - v. 12, n. 1 (März 2023)

Erschienen:	März 2023

Autor(en)	Titel	Seite(n)
Rahman, Mohammad Ashiqur / Harvey, John T. / Elkashef, Mohamed / Jiao, Liya / Jones, David	Characterizing the Aging and Performance of Asphalt Binder Blends Containing Recycled Materials	20220105
Das, Rahul / Gandhi, Indu Siva Ranjani / Palanisamy, Muthukumar	A Critical Review on Properties of PCM-Incorporated Cementitious Building Materials	20220053
Flegar, Matea / Ram, Kiran / Serdar, Marijana / Bosnar, Klara / Scrivener, Karen	Durability Challenges of Low-Grade Calcined Clay Opposed to High-Volume Fly Ash in General Purpose Concrete	20220138
Das, Shaswat Kumar / Nayak, Manoj Kumar / Patro, Sanjaya Kumar / Suda, Yuya	Durability Properties of Ambient Cured Geopolymer Mortar Made from Rice Husk Ash–Based Alkali Activator: A Comparative Study with Conventional Alkali Activator	20230069
Namakiaraghi, Parsa / McNally, Liam / Spragg, Robert / Farnam, Yaghoob Amir	Enhancing Tensile Response of Polymeric Elements Using Bioinspired 3D Printing: Studying the Effects of Printing Patterns and Process Parameters	20220066
Hamid, Waleed K. / Khoury, Issam / Mandadapu, Mahendra / Al Rikabi, Fouad T. / Ali, Hajir	Evaluating the Effect of Incorporating Slag Cement with Pre-wetted Lightweight Aggregate on Reducing Cracking of Concrete Bridge Decks	20220050
Li, Ping / Chen, Xiule / Wang, Meng / Nian, Tengfei	Evaluating the Performance and Fume Suppression Effect of Tourmaline-Modified Asphalt	20220113
Erarslan, Nazife	Feasibility Study of an ASTM Standard in Determining the Mixed-Mode I-II Fracture Toughness of Asphalt Concrete Materials	20220107
Gandhi, Indu Siva Ranjani / Boddepalli, Uday / Bisht, Reena / Wagh, Chandrashekhar	Impact of Addition of Fly Ash (as Sand Replacement) and Polypropylene Fibers on Energy Absorption Characteristics of Foam Concrete	20220131
Rezakhani, D. / Jafari, A. H. / Hajabassi, M.	Influence of Graphene Oxide and Ground Granulated Blast Furnace Slag on Engineering Properties of High-Performance Concretes	20220010
Anand, Sanchit / Gaur, Arun / Singh, Shatrunjay Yash	Mechanistic-Empirical Properties and Long-Term Potential of Warm Mix with Cecabase	20230024
Nazhan, Salam / Allbadi, Yousif / Hataf Naji, Zainab / Abdullah Al-Karakchi, Ahmed A. / Adeeb, Jamal	New Technique and Manufactured Device for Determining the Efflorescence of Clay Brick Masonry	20220040
Menaka, A. S. / Robinson, R. G. / Ramamurthy, K.	Performance of Cement–Fly Ash Masonry Mortar with Sand from Mine Overburden as an Environment-Friendly Alternative to Conventional Fine Aggregate	20220086
Solanki, Aarti / Singh, L. P. / Karade, S. R. / Sharma, U.	A Review of C3A Hydration with Admixtures and Its Role in Sulfate Attack	20210158
Fareed, Shamsoon / Ayub, Laiba / Khan, Asad-ur-Rehman	Simulation of Size Effect and Strength Prediction in Normal to Ultra High Strength Concrete Shear Deficient RC Beams	20230001
Chowdhury, Priyadarshini Saha / Tavva, Tejaswini Lakshmi / Mullapudi, Ramya Sri / Muppireddy, Amaranatha Reddy	Summarizing the Effect of Mixture Variables and Test Parameters on Fatigue Performance of Asphalt Mixtures	20220127
Ghantous, Rita M. / Fronczek, Brett / Jablonski, Clay B. / Bui, Van / Schaef, Steve / Reese, Steve R. / Weiss, W. Jason	Using Neutron Radiography to Assess Parameters Associated with Water Permeability Testing	20220061

Autor(en)

Titel

Seite(n)

Rahman, Mohammad Ashiqur / Harvey, John T. / Elkashef, Mohamed / Jiao, Liya / Jones, David

Characterizing the Aging and Performance of Asphalt Binder Blends Containing Recycled Materials

20220105

Das, Rahul / Gandhi, Indu Siva Ranjani / Palanisamy, Muthukumar

A Critical Review on Properties of PCM-Incorporated Cementitious Building Materials

20220053

Flegar, Matea / Ram, Kiran / Serdar, Marijana / Bosnar, Klara / Scrivener, Karen

Durability Challenges of Low-Grade Calcined Clay Opposed to High-Volume Fly Ash in General Purpose Concrete

20220138

Das, Shaswat Kumar / Nayak, Manoj Kumar / Patro, Sanjaya Kumar / Suda, Yuya

Durability Properties of Ambient Cured Geopolymer Mortar Made from Rice Husk Ash–Based Alkali Activator: A Comparative Study with Conventional Alkali Activator

20230069

Namakiaraghi, Parsa / McNally, Liam / Spragg, Robert / Farnam, Yaghoob Amir

Enhancing Tensile Response of Polymeric Elements Using Bioinspired 3D Printing: Studying the Effects of Printing Patterns and Process Parameters

20220066

Hamid, Waleed K. / Khoury, Issam / Mandadapu, Mahendra / Al Rikabi, Fouad T. / Ali, Hajir

Evaluating the Effect of Incorporating Slag Cement with Pre-wetted Lightweight Aggregate on Reducing Cracking of Concrete Bridge Decks

20220050

Li, Ping / Chen, Xiule / Wang, Meng / Nian, Tengfei

Evaluating the Performance and Fume Suppression Effect of Tourmaline-Modified Asphalt

20220113

Erarslan, Nazife

Feasibility Study of an ASTM Standard in Determining the Mixed-Mode I-II Fracture Toughness of Asphalt Concrete Materials

20220107

Gandhi, Indu Siva Ranjani / Boddepalli, Uday / Bisht, Reena / Wagh, Chandrashekhar

Impact of Addition of Fly Ash (as Sand Replacement) and Polypropylene Fibers on Energy Absorption Characteristics of Foam Concrete

20220131

Rezakhani, D. / Jafari, A. H. / Hajabassi, M.

Influence of Graphene Oxide and Ground Granulated Blast Furnace Slag on Engineering Properties of High-Performance Concretes

20220010

Anand, Sanchit / Gaur, Arun / Singh, Shatrunjay Yash

Mechanistic-Empirical Properties and Long-Term Potential of Warm Mix with Cecabase

20230024

Nazhan, Salam / Allbadi, Yousif / Hataf Naji, Zainab / Abdullah Al-Karakchi, Ahmed A. / Adeeb, Jamal

New Technique and Manufactured Device for Determining the Efflorescence of Clay Brick Masonry

20220040

Menaka, A. S. / Robinson, R. G. / Ramamurthy, K.

Performance of Cement–Fly Ash Masonry Mortar with Sand from Mine Overburden as an Environment-Friendly Alternative to Conventional Fine Aggregate

20220086

Solanki, Aarti / Singh, L. P. / Karade, S. R. / Sharma, U.

A Review of C3A Hydration with Admixtures and Its Role in Sulfate Attack

20210158

Fareed, Shamsoon / Ayub, Laiba / Khan, Asad-ur-Rehman

Simulation of Size Effect and Strength Prediction in Normal to Ultra High Strength Concrete Shear Deficient RC Beams

20230001

Chowdhury, Priyadarshini Saha / Tavva, Tejaswini Lakshmi / Mullapudi, Ramya Sri / Muppireddy, Amaranatha Reddy

Summarizing the Effect of Mixture Variables and Test Parameters on Fatigue Performance of Asphalt Mixtures

20220127

Ghantous, Rita M. / Fronczek, Brett / Jablonski, Clay B. / Bui, Van / Schaef, Steve / Reese, Steve R. / Weiss, W. Jason

Using Neutron Radiography to Assess Parameters Associated with Water Permeability Testing

20220061

Anzeige

Advances in Civil Engineering Materials - v. 12, n. 1 (März 2023)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Advances in Civil Engineering Materials - v. 12, n. 1 (März 2023)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.