Wind-Induced Dynamic Response of Inter-Story Isolated Tall Buildings with Friction Pendulum Bearing Based on an Enhanced Simplified Model
Autor(en): |
Zhihao Li
Zhiran Xu Guoqing Huang Zhanfang Liu |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Buildings, 19 Juni 2024, n. 6, v. 14 |
Seite(n): | 1568 |
DOI: | 10.3390/buildings14061568 |
Abstrakt: |
Isolation technology, especially for base isolation, is increasingly being applied in earthquake-prone areas. To satisfy some special demands (such as prevention from seawater erosion of an isolation layer, story-adding retrofit of existing buildings, avoidance of collision between base-isolated tall buildings, and so on), the isolation layer sometimes has to be set in the middle of a building to constitute inter-story isolated buildings. This special structural form inevitably encounters strong wind loads during service life, and its wind-resistant performance deserves to be investigated. This study conducts the wind-induced vibration analysis of inter-story isolated tall buildings with friction pendulum bearing (FPB). The nonlinear time domain analysis model and statistical linearization method to compute the wind-induced response of FPB inter-story isolated tall buildings are addressed based on an enhanced simplified model. Considering the independence of the upper and lower structures, two structural design schemes for inter-story isolated tall buildings are provided. Their dynamic characteristics are analyzed, and wind-induced responses are compared. Finally, the accuracy of the statistical linearization method is verified. This study provides an important theoretical basis for the structural design and wind resistance of inter-story isolated tall buildings. |
Copyright: | © 2024 by the authors; licensee MDPI, Basel, Switzerland. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
6.87 MB
- Über diese
Datenseite - Reference-ID
10787613 - Veröffentlicht am:
20.06.2024 - Geändert am:
20.06.2024