Wind Excited Action around Tall Building Having Different Corner Configurations

Aeroelastic instabilities are common in square or rectangular plan shape structures due to the development of powerful vortices by the rolling motion of the separated shear layers. Windward corner modifications such as corner cut, recession, rounded, and slotted help to reduce instabilities. Codal recommendations about common shapes like square, rectangle, triangle, and circular shapes are available in different international standards, but they did not provide the detailed analysis results for the different regular shapes with corner configurations. Although analysis was performed on various plan shapes of tall buildings using the computational fluid dynamics technique through k-ε turbulence model, a very small number of studies were performed on particular shapes with different corners having same plan area and height. The mean pressure coefficients of Model-A and Model-B were compared with various international standards and wind tunnel data, respectively, for validation, showing a nearly equivalent consistency; however, international standards consist of coefficients at 0° and 90° wind angles only. Wind effects on building shapes having different corners change the characteristics of the separated shear layer and reduce the downstream wake which helps to reduce drag and lift forces simultaneously. Recent study shows that the windward pressure distribution pattern is almost independent of building size and height. Therefore incorporation of corners in building helps to reduce the forces caused by extreme wind. A very large amount of numerical simulation data about wind pressure is generated, which can be used by the designer while designing such a building for wind load. Comparison have been made between buildings having different corners under same wind speed, and Model-D (round corner) performed very well against the wind.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.