Versions of Fiber-Optic Sensors for Monitoring the Technical Condition of Aircraft Structures

It is necessary to monitor the technical condition of various equipment due to the increased requirements for the safe operation of complex technical objects, such as bridges, structures, aircraft, cars and others. Monitoring systems based on the use of fiber-optic sensors measuring various physical quantities (temperature, deformation, pressure, vibration, etc.) are increasingly used for these purposes, since they have significant advantages over electrical sensors. The aim of the study is to compare the various options for the implementation of fiber-optic strain sensors to monitor the stress-strain state of the monitored object. A theoretical and experimental comparison of three types of fiber-optic sensors was carried out: on a mechanical fastener, sensors glued to the surface of a monitored design, and sensors embedded in a polymeric composite material at the stage of its manufacture. The requirements for the elements of the onboard systems of the aircraft according to the document “Environmental conditions and test procedures for airborne equipment QR-160D” are selected as comparison parameters. To assess the characteristics of various types of fiber-optic strain sensors, comparative bench mechanical and environmental tests were carried out. According to the test results, it was concluded that each type of sensor has its own advantages and disadvantages in comparison with each other, and in general, each of them can be used to create new standard systems for structural health monitoring of various units and structures of the aircraft (SHM systems). Also, the article proposed a new method of gluing a fiber-optic sensor to a controlled structure. This method - the use of specialized equipment, providing convenience and stability of gluing.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.