Vehicle Load Identification Using Machine Vision and Displacement Influence Lines

In recent years, bridge collapses resulting from vehicle overloading have underscored the crucial necessity for real-time monitoring of traffic conditions on bridges, making pavement-based weigh-in-motion systems indispensable for large bridges. However, these systems usually have poor durability and will cause traffic interruptions during their installation and maintenance processes. This paper addresses the challenge of recognizing vehicle loads by proposing a vehicle load identification method based on machine vision and displacement influence lines. The technology consists of three essential steps. Firstly, machine vision technology is utilized to identify vehicle trajectories. Following this, the displacement response, monitored by millimeter-wave radar, is integrated to calculate the influence lines of the structure’s displacement. Lastly, an overall least squares method incorporating a regularization term is applied to calculate axle weights. The efficacy of the proposed method is validated within the monitoring system of a specific continuous beam. Importantly, the calibration of vehicles and the validation dataset rely on information monitored by the pavement-based weigh-in-motion system of adjacent arch bridges, serving as ground truth. Results indicate that the identification errors for gross vehicle weight do not exceed 25%. This technology holds significant importance for identifying vehicle weights on small to medium-span bridges. Due to its cost-effectiveness, easy installation, and maintenance, it possesses a high potential for widespread adoption.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.