Validation of a Numerical Model for Novel Self-Centring Concentrically Braced Steel Frames

Significant inelastic deformations induced in structural systems lead to structures possibly possessing some degree of permanent lateral deformation following major seismic events. These permanent deformations have led to considerable research being conducted over the past 20 years into developing structural systems that exhibit self-centring behaviour. For a structural system such as the concentrically braced frame (CBF), for which the dissipating mechanism is the tensile yielding and compressive buckling of the diagonal steel tubular members, these residual deformations present a problem when considering the structure’s overall resilience to the seismic loading both during and after an event. This paper describes the numerical modelling of a novel self-centring, concentrically braced frame (SC-CBF) system that combines a conventional CBF with a self-centring arrangement to produce a structure that possesses the desirable lateral load-resisting capacity of the CBF but which also re-centres when subjected to many cycles of large inelastic brace deformation. First, an experimental test programme for the SC-CBF is briefly described, followed by a numerical model to capture the SC-CBF’s characteristics during cyclic loading. This numerical model is validated using the experimental test data, showing that the experimental and numerical simulation data match rather well. This development presents a platform upon which further research through experimental testing and numerical simulation can be conducted. The proposed SC-CBF system can then be developed into a viable lateral load-resisting system that will provide a more resilient system than the current conventional CBF.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.