Utilizing Marble Wastewater in Cement Pastes and Mortars for Enhanced Physico-Mechanical and Microstructural Properties

This research explored the potential of marble wastewater (MWW) in cement paste and mortar production, addressing water scarcity, sustainable growth, and resource management. It investigated the physico-mechanical properties and microstructure of cement materials incorporated with varying amounts of MWW. In this study, we utilized tap water and MWW for mortar quality testing, focusing on parameters including setting times, water absorption, and mechanical strength. The viability of MWW in concrete formulations was confirmed by its acceptable total dissolved solids and alkalinity levels. A comprehensive experimental program determined that using marble wastewater in place of tap water reduced the quantity of water required for cement consistency and generated slightly higher compressive strengths (2, 3, 4, and 6%) after 28 days of curing. Analytical techniques, including Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray analysis, and X-ray diffraction (XRD), were employed for molecular and microstructural analyses, which revealed that MWW had a significant influence on portlandite development and CSH formation at higher replacement levels. In short, this research highlights the feasibility of using MWW in cement products, contributing to sustainable water resources, and industrial waste management and utilization.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.