0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Using localised weather files to assess overheating in naturally ventilated offices within London's urban heat island

Autor(en):




Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Building Services Engineering Research and Technology, , n. 4, v. 33
Seite(n): 351-369
DOI: 10.1177/0143624411416064
Abstrakt:

Urban environments typically experience increased average air temperatures compared to surrounding rural areas – a phenomenon referred to as the Urban Heat Island (UHI). The impact of the UHI on comfort in naturally ventilated buildings is the main focus of this article. The overheating risk in urban buildings is likely to be exacerbated in the future as a result of the combined effect of the UHI and climate change.

In the design of such buildings in London, the usual current practice is to view the use of one generic weather file as being adequate to represent external temperatures. However, the work reported here demonstrates that there is a considerable difference between the overheating performance of a standard building at different sites within London. This implies, for example, that a building may wrongly pass or fail criteria used to demonstrate compliance with building regulations as a result of an inappropriate generic weather file being used. The work thus has important policy implications.

Practical application: The Greater London Authority has recently developed, with the Chartered Institute of Building Services Engineers, guidance for developers to address the risk of overheating in buildings via the provision of weather files for London relating to three zones. While such an initiative is welcomed, it may be that a weather file tailored to the building location would be preferable. Of course, this would add further complexity to the process and a view would have to be taken as the viability of such an approach. The work presented in this article, however, suggests that serious consideration should be given to the use of tailored weather data for regulatory purposes.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.1177/0143624411416064.
  • Über diese
    Datenseite
  • Reference-ID
    10477508
  • Veröffentlicht am:
    18.11.2020
  • Geändert am:
    18.11.2020
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine