The Use of Mode Shape Estimated from a Passing Vehicle for Structural Damage Localization and Quantification

Mode shapes estimated from the vehicle responses are normally used to detect bridge damage efficiently for their high spatial resolution. However, an updated baseline finite element model (FEM) is normally required to quantify damages for such an approach. A two-stage damage detection procedure is presented for bridges by utilizing the mode shape estimated from a moving vehicle. Damage locations are first determined through a damage localization index (DLI) defined by regional mode shape curvature (RMSC). Then the relationship between the damage extents and the RMSC changes is investigated by FEM simulation. Finally, an equation set to quantify the single and multiple damages is deduced by combining the RMSCs and the relationship between the damage extents and the RMSC changes established by an un-updated FEM. Numerical and experimental examples are carried out to verify the validity and efficiency of the two-stage method. The results revealed that it can localize and quantify damages with satisfactory precision by using the response measured from one sensor only.