Upper Bound Analysis of Two-Layered Slopes Subjected to Seismic Excitations Using the Layer-Wise Summation Method

Due to natural sedimentation and artificial filling, slopes exhibit heterogeneity in the form of multi-layer soils, namely, layered slopes. Compared with homogenous slopes, the failure mechanism of layered slopes is more complex owing to the different shear strengths of each soil layer. Therefore, it is of great importance to gain insight into the stability of layered slopes. In this study, the upper bound theorem of limit analysis incorporated with a pseudo-static approach is utilized to investigate the seismic stability of two kinds of two-layered slopes: one with a stiff lower soil layer and the other with a weak lower soil layer. Three failure patterns, namely face failure, toe failure and base failure, are taken into account. A depth coefficient (Δ) is introduced to describe the distribution of two soil layers. The layer-wise summation method is adopted to calculate the safety factor and yield acceleration coefficient more conveniently. Based on Newmark’s method, the earthquake-induced horizontal displacement is estimated. The calculated results are validated by comparisons with published literature and the numerical method in terms of safety factor, critical failure surface and yield acceleration coefficient. The results show that the depth coefficient has a significant influence on the failure mechanism of two-layered slopes by determining whether the stability of upper-layered soil is dominant in the overall slope stability or not. Inaccurately identifying the failure patterns will overestimate the seismic performance of two-layered slopes in the aspects of safety factor and yield acceleration coefficient, leading to an underestimation of earthquake-induced horizontal displacement.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.