0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Upgrading the shear strength of non-ductile reinforced concrete frame connections using FRP overlay systems

Autor(en):


Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Electronic Journal of Structural Engineering, , v. 7
Seite(n): 8-18
DOI: 10.56748/ejse.770
Abstrakt:

This investigation presents the use of Fiber Reinforced Polymer (FRP) composite systems in upgrading existing reinforced concrete frames to meet strength and ductility requirements laid out in recent ACI building codes (ACI-318. 2002). Analytical calculations are presented for the shear behavior of frames strengthened with layers of FRP and an experimental study is carried out to verify the mechanical properties of the proposed FRP systems with various fiber architecture designs. Carbon and fiber glass FRP systems have been analysed. Flat layers and corrugated shapes with rectangular and circular configurations are employed in the retrofitting systems in addition to various orientations of the fibers which are taken into consideration. The ductility requirement is ensured by controlling the out of plane flexural rigidity of the FRP systems. The desired out of plane rigidity is obtained by increasing the thickness of the FRP systems or by corrugating the applied FRP overlays. In conclusion, this study has shown that the use of FRP systems is an efficient and viable repair method for upgrading concrete frame connections with shear deficiency.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.56748/ejse.770.
  • Über diese
    Datenseite
  • Reference-ID
    10778902
  • Veröffentlicht am:
    12.05.2024
  • Geändert am:
    12.05.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine