Two-Way Time-Dependent Prestress Losses of Prestressed Concrete Containment with Bonded Prestressing Strands

Prestressing plays a pivotal role in ensuring the tightness and integrity of prestressed concrete containment in nuclear power plants. The prestress loss reduces the compressive stress in concrete resulting from the prestressing strands and increases the risk of containment leakage under severe accident conditions. Therefore, the accurate prediction of prestress loss is essential for the design and in-service management of prestressed concrete containment. Unlike one-way beams or girders in building structures and bridges, two-way prestressing systems are used in prestressed concrete containment. In the current simplified method for evaluating time-dependent prestress loss, the interaction of concrete creep in two directions resulting from the two-way prestressing strands and the influence of the steel liner and mild steel rebars in two directions are neglected. In this study, based on the principle of creep superposition, the age-adjusted effective method for the creep estimation of concrete, and considering concrete shrinkage, concrete creep, and the relaxation of prestressing strands, as well as the influence of the steel liner and mild steel rebars in two directions, a sectional analysis is performed for prestressed concrete containment with bonded prestressing strands, and equations for calculating the two-way time-dependent prestress losses are derived. The results of the two-way time-dependent prestress losses predicted by the derived equations are compared with those of tests in the literature, and great agreement is achieved. Finally, a case study is given to show the application of the proposed method for the prediction of prestress loss in prestressed concrete containment in the nuclear power plant.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.