Thermo-Mechanical Coupling Load Transfer Method of Energy Pile Based on Hyperbolic Tangent Model

By employing the hyperbolic tangent model of load transfer (LT), this paper establishes the thermo-mechanical (TM) coupling load transfer analysis approach for an energy pile (EP). By incorporating the control condition of the unbalance force at the null point, the method for determining the null point considering the temperature effect is enhanced. The viability of the presented method is validated through the measured outcomes from model experiments of energy piles. A parametric investigation is conducted to explore the impact of the soil shear strength parameters, upper load, temperature variation, head stiffness, and radial expansion on the axial force, strain, and displacement of the energy pile under thermo-mechanical coupling. The results suggest that the locations of the null point and the maximum axial force are dependent on the constraint boundary conditions of the pile side and the two ends. When the stiffness of the pile top increases, axial stress and displacement increase, while strain decreases. An increase in the drained friction angle leads to an increase in axial stress under thermal-load coupling, but strain and displacement decline. The radial expansion has a negligible influence on the thermo-mechanical interaction between the pile and the soil.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.