0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Thermo-Acoustic Properties of Four Natural Fibers, Musa textilis, Furcraea andina, Cocos nucifera, and Schoenoplectus californicus, for Building Applications

Autor(en): ORCID
ORCID
ORCID
ORCID

ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 8, v. 14
Seite(n): 2265
DOI: 10.3390/buildings14082265
Abstrakt:

Natural and bio-based construction materials such as bamboo, cork, or natural fiber composites offer a promising solution for enhancing the environmental sustainability of buildings. In this sense, the paper presents an experimental thermo-acoustic characterization of four common Ecuadorian natural fibers, abaca (Musa textilis), cabuya (Furcraea andina), coir (Cocos nucifera), and totora (Schoenoplectus californicus). Different densities were considered, from 85 kg/m3 (Cabuya) to 244 kg/m3 (totora), to thermo-acoustically characterize the samples built with these fibers, by means of the guarded-hot-plate (GHP) and impedance tube methods in-lab experimental benches. The exhaustive original characterization of the evaluated natural fiber composites showed a promising overall thermo-acoustic behavior. The thermal conductivity of the fibers was around 0.04–0.06 W/m·K and, therefore, comparable to other materials such as polystyrene, polyurethane, or aerogel that are already utilized for similar applications. On the other hand, the sound-absorption properties of the evaluated fibers are also very competitive, but strongly affected by the thickness of the sample, with noise reduction coefficient NRC ranging from 0.12 to 0.53. Consequently, the production and distribution of these materials in the Ecuadorian market for thermal insulation and acoustic conditioning constitute an alternative characterized by good technical performance, which, compared to synthetic composites used in the construction industry for similar duties, is ecological, sustainable, and has low built-in energy consumption.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10795138
  • Veröffentlicht am:
    01.09.2024
  • Geändert am:
    01.09.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine