Tensile Behavior of Basalt-Fiber-Grid-Reinforced Mortar before and after Exposure to Elevated Temperature

This paper presents an experimental study on the tensile behavior of basalt-fiber-grid-reinforced mortar (BGRM) before and after exposure to an elevated temperature of 300 °C considering the effect of fiber grid type, short polyvinyl alcohol fiber (PVA), and high-temperature exposure time. The experimental results show that the mortar plates reinforced with woven textile T25 and fiber-reinforced polymer (FRP) grid G50 exhibited more pronounced strain-hardening behavior. The highest peak stress was obtained for the T25-reinforced plate, which was 85% and 32% higher than that of the T5- and G50-reinforced plates, respectively. Meanwhile, the bridging effect of PVA fibers in mortar can improve the tensile properties. As the high-temperature exposure time increased, the cracking and peak stress of BGRM decreased significantly. Especially for the T5-reinforced plate after exposure to elevated temperature for 2 h, the cracking and peak stress decreased by 60.5% and 38%, respectively. The positive effect of short PVA fibers on the tensile properties of the BGRM became obsolete owing to the melting of short fibers at high temperature. Furthermore, an exponential strength degradation model related to high-temperature exposure time was proposed.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.