Sustainable Assessment of Concrete Repairs through Life Cycle Assessment (LCA) and Life Cycle Cost Analysis (LCCA)

Nowadays, a vast number of concrete structures are approaching the end of their expected service life. The need for maintenance and repair is high due to the continued deterioration of the existing building inventory and infrastructure, resulting in a large need for concrete repair in the near future. Reinforcement corrosion is the most important deterioration mechanism, causing (i) severe concrete damage (cracking along reinforcement and the spalling of the cover concrete) and (ii) loss in steel section. Therefore, appropriate repair techniques for corrosion damage are the main focus of this review paper. With the European transition towards a circular economy and with sustainable development goals in mind, it is also important to consider the environmental impact along with the technical requirements and life cycle cost. In order to improve the sustainability of concrete structures and repairs over their life cycle, life cycle assessment (LCA) and life cycle cost analysis (LCCA) should be applied. However, more research efforts are needed in this field for further development and refinement. This literature review tries to adress this need by compiling existing knowledge and gaps in the state-of-the-art. A comprehensive literature survey about concrete repair assessment through LCA and LCCA is performed and showed a high potential for further investigation. Additionally, it was noticed that many differences are present between the studies considering LCA and/or LCCA, namely, the considered (i) structures, (ii) damage causes, (iii) repair techniques, (iv) estimated and expected life spans, (v) LCCA methods, (vi) life cycle impact assessment (LCIA) methods, etc. Therefore, due to the case specificity, mutual comparison is challenging.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.