0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Sustainability Assessments of Living Walls in the Mediterranean Area

Autor(en): ORCID

ORCID
ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 10, v. 14
Seite(n): 3222
DOI: 10.3390/buildings14103222
Abstrakt:

The evaluation of the environmental impacts of a living wall (LW) system cannot leave out the effects on the buildings’ sustainability during its life cycle. Consequently, to consider the embodied impacts of all the components, an LCA of the whole system is recommended. Therefore, this paper was targeted to evaluate the environmental performances of four LW solutions considering a combination of energy performances and system LCA. In the first step, the yearly energy consumption of a reference building equipped with LWs was determined through simulations carried out in the EnergyPlus environment. Subsequently, the LCA completed the evaluation of the environmental impact of the different building configurations. To quantify the effects related to the implementation of LWs, the results were compared to those obtained for the reference building without vegetation. The analyses refer to a real university’s four-floor housing located in the city of Reggio Calabria (38°07′21.4″ N 15°39′45.2″ E), which is currently under construction. The results confirm the benefits achievable through the LW integration, measuring both energy savings and the increase in the hours with indoor temperature within the well-being zone. At an annual level, the best LW solution produces 24% of energy saving and LCA highlights a limitation of 2.1 × 105 kg of CO2eq when compared to the reference case. These data confirm the effectiveness of implementing LWs as a reliable intervention to enhance building environmental impact, especially for edifices requiring renovation.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10804700
  • Veröffentlicht am:
    10.11.2024
  • Geändert am:
    10.11.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine