0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Studying the Indoor Environment and Comfort of a University Laboratory: Air-Conditioning Operation and Natural Ventilation Used as a Countermeasure against COVID-19

Autor(en):

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 7, v. 12
Seite(n): 953
DOI: 10.3390/buildings12070953
Abstrakt:

In this study, the indoor air quality and thermal environment of a university facility were analyzed when an air conditioner was operated and natural ventilation was provided; the most effective natural ventilation method was also evaluated. The research conditions were established by adjusting the temperature of the air conditioner, and frequency of window openings every hour. The area around the windows that is open for natural ventilation was easily affected by outdoor air temperature and humidity. However, since the air conditioner was operating, there was only a brief period during which the environment was uncomfortable. Therefore, the participants in the questionnaire survey expressed neutrality or slight satisfaction for the thermal environment of the entire space. Setting the room temperature to 25 °C in summer was highly comfortable and generated a satisfactory indoor thermal environment. When the room temperature was set to 20 °C in winter, the thermal comfort level was higher than in the other conditions. Providing natural ventilation for 5 min every 30 min was determined to be effective in maintaining an indoor CO2 concentration of 1000 ppm or less. Facilitating natural ventilation for 10 min every 60 min allowed the entry of a large amount of fresh air; however, due to the extended period in which the windows and doors were closed, there were instances when the indoor CO2 concentration exceeded 1000 ppm. Therefore, providing frequent natural ventilation with short time intervals is effective for improving indoor air quality.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10688484
  • Veröffentlicht am:
    13.08.2022
  • Geändert am:
    10.11.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine