Study on the Susceptibility of Steel Arches with Letting Pressure Nodes Based on Incremental Dynamic Analysis

When soft rock tunnels pass through fractured fault zones, they are particularly susceptible to extrusion and large-scale deformations, especially during seismic events. To address these challenges, this study introduces an innovative yield-support steel arch design featuring a circumferential letting pressure node at its core. This design delivers incremental support resistance within the deformation zone and a susceptibility curve is applied to evaluate the damage probability of the steel arch with a letting pressure node under seismic loading conditions. Measurements of the surrounding rock pressure and structural forces on the steel arch with the letting pressure node were conducted at the Baoshan Jewel Mountain Tunnel in China. The field experiment results revealed a 23% reduction in the surrounding rock pressure and an 11% decrease in the internal forces of the support structure. These findings demonstrate the successful application of the letting pressure node-supported steel arch in mitigating large deformations in soft rock environments. Additionally, using finite element software ANSYS 2022, a seismic time-history analysis was conducted, employing the relative deformation rate of the letting pressure node steel arch as the damage index and the peak ground acceleration (PGA) as the strength parameter to generate the incremental dynamic analysis (IDA) curve. According to the susceptibility curve derived from the incremental dynamic analysis, at the design ground motion level of 8 degrees, the letting pressure node steel arch has a 94% probability of exceeding its normal service life limit and experiencing damage. The findings of this study offer a novel approach to addressing large deformations in soft rock tunnels. The proposed susceptibility curves for steel arches with letting pressure nodes provide a robust foundation for predicting the damage probability of yielding support structures under seismic conditions.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.