Study on the Stability of Slopes Reinforced by Composite Vegetation Combined with a Geogrid under Rainfall Conditions
Autor(en): |
Qizhi Hu
Yong Zhou Gaoliang Tao |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Advances in Civil Engineering, Januar 2021, v. 2021 |
Seite(n): | 1-10 |
DOI: | 10.1155/2021/8058009 |
Abstrakt: |
The planting of shrubs and trees on geogrid-reinforced slopes is an important ecological slope protection method that is frequently implemented in the rainy areas of southern China. First, this paper analyzes the soil-fixing principle of the geogrid and root system and demonstrates the feasibility of using composite vegetation of shrubs and trees to reinforce the slope with a geogrid. Using the Yushi Expressway project in Guizhou, we conducted a stability analysis of slopes under different working conditions and different reinforcement modes. We determined that the ecological protection method of combining composite vegetation with a geogrid can effectively increase the stability of slopes. The maximum displacement of the ecological slope under rainfall conditions was reduced by 82% compared with the original slope, and the overall stability was improved by 35%. Four factors affect the slope stability: the depth of shrub reinforcement, depth of anchorage of trees, distribution of trees, and spacing of the geogrids. An orthogonal analysis considering these 4 factors with 3 levels was implemented. The following optimal combination was obtained to ensure ecological protection under rainfall conditions: a shrub reinforcement depth of 0.6 m, a tree anchorage depth of 3 m, a grid spacing of 0.4 m, and a top-sparse and bottom-dense tree distribution. The combined slope protection schematic was applied to the Yushi Expressway project in Guizhou, and a strong reinforced slope protection effect was observed. |
Copyright: | © 2021 Qizhi Hu et al. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
2.71 MB
- Über diese
Datenseite - Reference-ID
10625308 - Veröffentlicht am:
26.08.2021 - Geändert am:
17.02.2022