0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Study on the Performance of High-Performance Mortar (HPM) Prepared Using Sodium-Silicate-Modified Graphite Tailing Sand

Autor(en): ORCID



Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 10, v. 14
Seite(n): 3269
DOI: 10.3390/buildings14103269
Abstrakt:

In order to rationalize the consumption of graphite tailing sand and reduce its pollution of the environment—with sodium silicate being a commonly used activator for improving the strength of concrete composites—in this study, the joint effects of sodium silicate (SS) and graphite tail sand (GT) on the strength and frost resistance of graphite tail sand high-performance mortar (GT-HPM) were investigated. Experiments were conducted to evaluate the bulk density, water absorption, compressive strength, speed of sound, and working performance status of GT-HPM before and after freezing and thawing at different SS dosages and different GT substitution rates. The microstructural properties of GT-HPM were also analyzed by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM/EDS). The results showed that 4% SS doping improved the performance of GT-HPM more obviously. Moreover, with an increase in the GT substitution rate, the mechanical properties and frost resistance of GT-HPM increased firstly and then decreased, and the best performance of GT-HPM was obtained when the GT substitution rate was 20%. At 6% SS doping, the performance of GT-HPM gradually decreased with the increase in the graphite tailing sand substitution rate. FT-IR testing showed that there was no significant change with the type of hydration products used, and the Si–O–T absorption peak and average bond length of GT-4 were the largest. SS and GT promoted the generation of hydration products. Microstructural analysis showed that 4% SS promoted the hydration reaction; in addition, an appropriate amount of GT improved the pore structure of HPM, increased the strength and frost resistance, and provided fundamental insights for the subsequent comprehensive utilization of graphite tailing sand.

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen. Der Volltext ist beim Verlag erhältlich über die DOI: 10.3390/buildings14103269.
  • Über diese
    Datenseite
  • Reference-ID
    10804400
  • Veröffentlicht am:
    10.11.2024
  • Geändert am:
    10.11.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine