Study on the Diffusion Law of Grouting Slurry at the Pile Tip of Bored Piles in Gravel Pebble Layers
Autor(en): |
Junhu Li
Yuping Wu Chenghui Wu Fengpan Zhu Quanwei Zhao Gangping Zhang Zihai Yan Riqing Xu |
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Buildings, 23 Juli 2024, n. 8, v. 14 |
Seite(n): | 2555 |
DOI: | 10.3390/buildings14082555 |
Abstrakt: |
The post-construction improvement technology of bored pile tips has been widely used in the construction of gravel pebble layers, but the diffusion law of the grouting slurry remains to be revealed. To study the diffusion law of the grouting slurry at the tip of bored piles in gravel pebble layers, an equivalent relationship between the seepage continuity equation and the mass diffusion continuity equation was established based on an in-depth comparative analysis; further relying on the Diluted Species Transport Module in Porous Media of Comsol Multiphysics, a three-dimensional numerical model of slurry diffusion was established to systematically study the impact of key factors such as different porosities, grouting times, grouting pressures, slurry diffusion coefficients, and the ratio of vertical to horizontal slurry diffusion coefficients on the diffusion radius of the slurry. The calculation results show that with the continuation of grouting, the increase in porosity, grouting pressure, and slurry diffusion coefficient, or the decrease in the ratio of vertical to horizontal slurry diffusion coefficients, the diffusion range of the slurry increases accordingly. Furthermore, comparatively speaking, the impact of porosity is the smallest, while the impact of the slurry diffusion coefficient is the greatest. The research findings reflect the diffusion trend of the slurry in the gravel pebble layer, which has guiding significance for the quality control of the actual design and construction of grouting. |
Copyright: | © 2024 by the authors; licensee MDPI, Basel, Switzerland. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
4.44 MB
- Über diese
Datenseite - Reference-ID
10795651 - Veröffentlicht am:
01.09.2024 - Geändert am:
01.09.2024