Study on Response and Influencing Factors of Shield Single/Twin Tunnel under Seismic Loading using FLAC 3D

The research on the dynamic response and influencing factors of shield tunnel lining under earthquake demonstrates significant engineering value in guiding the design of antiseismic tunnels. In this paper, a nonlinear finite element model of soil-tunnel interaction is established based on FLAC finite difference software, and then Mohr–Coulomb elastoplastic model and dynamic plastic damage model are used to simulate the dynamic characteristics of soil and lining damage of tunnel, and the seismic waves of South Iceland are selected to analyze the residual internal force, dynamic internal force distribution, and the relative deformation of the top and bottom of the arch of the shield tunnel under the earthquake load. Meanwhile, the effects of depth tunnel, lining thickness, and tunnel diameter on the dynamic response of the tunnel are discussed. In addition, the interaction law of horizontal parallel tunnel and the amplification effect on the surface acceleration are also studied. The results show that under the action of a strong earthquake, the bearing capacity of the tunnel decreases sharply, the lining is destroyed, and a large residual internal force appears. When the buried depth of the tunnel is small, the nonlinear effect is more significant, and the R value increases at first and then decreases with the increase in the seismic acceleration. The maximum dynamic bending moment and maximum dynamic axial force of the tunnel lining aggrandize obviously with the increase in tunnel diameter and lining thickness. In particular, the dynamic bending moment has internal force redistribution and deflection under the condition of large tunnel diameter and small lining thickness. Moreover, the interaction of parallel tunnels affects the distribution of internal force and the magnitude of adjacent surface acceleration.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.