Study on Finite Element Simulation Method and Broken Sling Effect of Single Side Suspension Bridge with Curved Decks

As a new type of bridge structure system, the single side suspension bridge with curved decks has the characteristics of typical special-shaped bridge structure, and its forces are relatively complex. The slings are usually fragile components, and the breakage of the slings will affect the safety of the whole bridge structure. Based on a single side curved suspension bridge, the static and dynamic nonlinear models of the bridge were established by using ANSYS general finite element software. Based on the analysis of the parameters, the reasonable values of failure time of sling, the damping ratio of the bridge structure, the effect of the broken sling on the residual internal force, the tensile force of the main cable, the bending moment of the main beam and the vertical displacement are discussed. The results show that the effect of sling breakage increases with the decrease of sling failure time and structural damping ratio, and the effect of sling breakage on the internal force of the main cable is small, but it will cause a rapid increase of the internal force of the adjacent slings on the same side and the main beam.