0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Study on Deformation Characteristics and Damage Model of NMK Concrete under Cold Environment

Autor(en):

ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 9, v. 12
Seite(n): 1431
DOI: 10.3390/buildings12091431
Abstrakt:

To improve the ability of concrete structures to resist freeze-thaw damage in cold environments, explore the effect and mechanism of nano-metakaolin (NMK) on frost resistance of concrete. And make up for the deficiencies in the mechanical properties and deformation process of na-no-metakaolin concrete in freeze-thaw environments. Rapid freeze-thaw cycle experiment was car-ried out to detect the deterioration law of concrete. Physical and mechanical properties under freeze-thaw environment was measured. The modification mechanism of nano-metakaolin on con-crete frost resistance from micro and meso scales was analyzed. The effect of freeze-thaw damage on nano-metakaolin concrete was characterized. The influence law of stress strain is established, and the meso-statistical damage constitutive model of nano-metakaolin concrete under freeze-thaw action is established. The results show that: Compared with other nano-clays, adding 5% nano-metakaolin can effectively slow down concrete’s freeze-thaw cracking and crack propagation. After 125 freeze-thaw cycles, the surface crack width of concrete mixed with 5% nano-metakaolin is only 0.1mm. Without freeze-thaw cycles, the compressive strength of concrete mixed with 3% nano-metakaolin is the highest, which is 28.75% higher than that of ordinary concrete; after 125 freeze-thaw cycles, the loss rate of compressive strength of concrete mixed with 5% nano-metakaolin was 12.07%. After 125 freeze-thaw cycles, the peak strain is 0.45 times that of concrete without NMK, and the peak stress is 3 times that of concrete without NMK.

Copyright: © 2022 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10692680
  • Veröffentlicht am:
    23.09.2022
  • Geändert am:
    10.11.2022
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine