Study of Semi-Adiabatic Temperature Rise Test of Mineral Admixture Concrete

The concrete used in the main structures of subway stations has a high degree of constraint. Consequently, temperature changes and shrinkage during construction frequently lead to significant constraint stress, which can result in structural cracking. Therefore, cement with low hydration heat is commonly used in engineering to reduce the temperature of concrete during its age. Aiming at the problem of hydration and heat release caused by concrete construction, based on the principles of concrete hydration heat release and a numerical analysis method, an optimized semi-adiabatic temperature rise test method has been introduced to investigate concrete temperature rise characteristics with different mineral admixtures. The following conclusions were obtained: The effect of reducing the heat of hydration is related to the content and material properties of different mineral admixtures, but not the type of mineral admixture to be incorporated. The temperature rise performance of four common mineral admixtures is as follows: ① total cooling capacity: limestone powder > slag, fly ash > metakaolin; ② early heat generation rate: metakaolin > slag > fly ash > limestone powder; ③ heat reduction rate in the middle and late periods: metakaolin > limestone powder > fly ash > slag.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.